[J-u-boot.git] / include / configs / stxxtc.h

/*
 * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * Dan Malek, Embedded Edge, LLC, [email protected]
 * U-Boot port on STx XTc 8xx board
 * Mostly copied from Panto's NETTA2 board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC875		1	/* This is a MPC875 CPU		*/
#define CONFIG_STXXTC		1	/* ...on a STx XTc  board	*/

#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
#undef	CONFIG_8xx_CONS_SMC2
#undef	CONFIG_8xx_CONS_NONE

#define CONFIG_BAUDRATE		115200	/* console baudrate = 115.2kbps	*/

#define CONFIG_XIN		10000000	/* 10 MHz input xtal */

/* Select one of few clock rates defined later in this file.
*/
/* #define MPC8XX_HZ		50000000 */
#define MPC8XX_HZ		66666666

#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ

#if 0
#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#endif

#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */

#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND							\
	"tftpboot; " 								\
	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " 	\
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " 	\
	"bootm"

#define CONFIG_AUTOSCRIPT
#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_NISDOMAIN


#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/

#define	CONFIG_NET_MULTI	1 	/* the only way to get the FEC in */
#define	FEC_ENET		1	/* eth.c needs it that way... */
#undef CFG_DISCOVER_PHY
#define CONFIG_MII		1
#undef CONFIG_RMII

#define CONFIG_ETHER_ON_FEC1	1
#define CONFIG_FEC1_PHY		1 	/* phy address of FEC */
#undef CONFIG_FEC1_PHY_NORXERR

#define CONFIG_ETHER_ON_FEC2	1
#define CONFIG_FEC2_PHY		3
#undef CONFIG_FEC2_PHY_NORXERR

#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING


#define CONFIG_BOARD_EARLY_INIT_F	1
#define CONFIG_MISC_INIT_R

/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP			/* undef to save memory		*/
#define	CFG_PROMPT	"xtc> "		/* Monitor Command Prompt	*/

#define CFG_HUSH_PARSER	1
#define CFG_PROMPT_HUSH_PS2	"> "

#if defined(CONFIG_CMD_KGDB)
#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/

#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/

#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CFG_IMMR		0xFF000000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define	CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0x40000000
#if defined(DEBUG)
#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#else
#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#endif

/* yes this is weird, I know :) */
#define CFG_MONITOR_BASE	(CFG_FLASH_BASE | 0x00F00000)
#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

#define CFG_RESET_ADDRESS	0x80000000

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define	CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_SECT_SIZE	0x10000

#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00000000)
#define CFG_ENV_OFFSET		0
#define	CFG_ENV_SIZE		0x4000

#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x00010000)
#define CFG_ENV_OFFSET_REDUND	0
#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE

#define CFG_FLASH_CFI		1
#define CFG_FLASH_CFI_DRIVER	1
#undef CFG_FLASH_USE_BUFFER_WRITE 	/* use buffered writes (20x faster) */
#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/

#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + 0x2000000 }

#define CFG_FLASH_PROTECTION

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value */
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E)

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CFG_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 *
 */

#if CONFIG_XIN == 10000000

#if MPC8XX_HZ == 50000000
#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
			 (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
		 	 PLPRCR_TEXPS)
#elif MPC8XX_HZ == 66666666
#define CFG_PLPRCR	((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
			 (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
		 	 PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 10MHz
#endif
#else
#error unsupported freq for XIN (must be 10MHz)
#endif


/*
 *-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 *
 * Note: When TBS == 0 the timebase is independent of current cpu clock.
 */

#define SCCR_MASK	SCCR_EBDF11
#if MPC8XX_HZ > 66666666
#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00 | SCCR_EBDF01)
#else
#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00)
#endif

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
/*#define	CFG_DER	0x2002000F*/
#define CFG_DER	0

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x42000000	/* FLASH bank #1	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */

#define FLASH_BANK_MAX_SIZE	0x01000000	/* max size per chip */

#define CFG_REMAP_OR_AM		0x80000000
#define CFG_PRELIM_OR_AM	(0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))

/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)

#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )

#define CFG_OR1_PRELIM	((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CFG_OR_TIMING_FLASH)
#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )

/*
 * BR4 and OR4 (SDRAM)
 *
 */
#define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/

/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)

#define CFG_OR4_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
#define CFG_BR4_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)

/*
 * Memory Periodic Timer Prescaler
 */

/*
 * Memory Periodic Timer Prescaler
 *
 * The Divider for PTA (refresh timer) configuration is based on an
 * example SDRAM configuration (64 MBit, one bank). The adjustment to
 * the number of chip selects (NCS) and the actually needed refresh
 * rate is done by setting MPTPR.
 *
 * PTA is calculated from
 *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 *
 *	gclk	  CPU clock (not bus clock!)
 *	Trefresh  Refresh cycle * 4 (four word bursts used)
 *
 * 4096  Rows from SDRAM example configuration
 * 1000  factor s -> ms
 *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 *    4  Number of refresh cycles per period
 *   64  Refresh cycle in ms per number of rows
 * --------------------------------------------
 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 *
 * 50 MHz => 50.000.000 / Divider =  98
 * 66 Mhz => 66.000.000 / Divider = 129
 * 80 Mhz => 80.000.000 / Divider = 156
 */

#define CFG_MAMR_PTA		 234

/*
 * For 16 MBit, refresh rates could be 31.3 us
 * (= 64 ms / 2K = 125 / quad bursts).
 * For a simpler initialization, 15.6 us is used instead.
 *
 * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
 * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
 */
#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

/* 8 column SDRAM */
#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)

/* 9 column SDRAM */
#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */

/****************************************************************/

#define NAND_SIZE	0x00010000	/* 64K */
#define NAND_BASE	0xF1000000

/****************************************************************/

/* NAND */
#define CFG_NAND_LEGACY
#define CFG_NAND_BASE		NAND_BASE
#define CONFIG_MTD_NAND_ECC_JFFS2
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_MTD_NAND_UNSAFE

#define CFG_MAX_NAND_DEVICE	1
#undef NAND_NO_RB

#define SECTORSIZE		512
#define ADDR_COLUMN		1
#define ADDR_PAGE		2
#define ADDR_COLUMN_PAGE	3
#define NAND_ChipID_UNKNOWN 	0x00
#define NAND_MAX_FLOORS		1
#define NAND_MAX_CHIPS		1

/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */
#define NAND_DISABLE_CE(nand) \
	do { \
		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) |=  (1 << (15 - 7)); \
	} while(0)

#define NAND_ENABLE_CE(nand) \
	do { \
		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \
	} while(0)

#define NAND_CTL_CLRALE(nandptr) \
	do { \
		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \
	} while(0)

#define NAND_CTL_SETALE(nandptr) \
	do { \
		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) |=  (1 << (15 - 15)); \
	} while(0)

#define NAND_CTL_CLRCLE(nandptr) \
	do { \
		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \
	} while(0)

#define NAND_CTL_SETCLE(nandptr) \
	do { \
		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) |=  (1 << (31 - 23)); \
	} while(0)

#ifndef NAND_NO_RB
#define NAND_WAIT_READY(nand) \
	do { \
		int _tries = 0; \
		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \
			if (++_tries > 100000) \
				break; \
	} while (0)
#else
#define NAND_WAIT_READY(nand) udelay(12)
#endif

#define WRITE_NAND_COMMAND(d, adr) \
	do { \
		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
	} while(0)

#define WRITE_NAND_ADDRESS(d, adr) \
	do { \
		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
	} while(0)

#define WRITE_NAND(d, adr) \
	do { \
		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
	} while(0)

#define READ_NAND(adr) \
	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))

/*****************************************************************************/

#define CFG_DIRECT_FLASH_TFTP
#define CFG_DIRECT_NAND_TFTP

/*****************************************************************************/

/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB,
 * CxOE and CxRESET.  We use the CxOE.
 */
#define STATUS_LED_BIT		0x00000080		/* bit 24 */

#define STATUS_LED_PERIOD	(CFG_HZ / 2)
#define STATUS_LED_STATE	STATUS_LED_BLINKING

#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */

#ifndef __ASSEMBLY__

/* LEDs */

/* led_id_t is unsigned int mask */
typedef unsigned int led_id_t;

#define __led_toggle(_msk) \
	do { \
		((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
	} while(0)

#define __led_set(_msk, _st) \
	do { \
		if ((_st)) \
			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \
		else \
			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
	} while(0)

#define __led_init(msk, st) __led_set(msk, st)

#endif

/******************************************************************************/

#define CFG_CONSOLE_IS_IN_ENV		1
#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
#define CFG_CONSOLE_ENV_OVERWRITE	1

/******************************************************************************/

/* use board specific hardware */
#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
#define CONFIG_HW_WATCHDOG
#define CONFIG_SHOW_ACTIVITY

/*****************************************************************************/

#define CONFIG_AUTO_COMPLETE	1
#define CONFIG_CRC32_VERIFY	1
#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1

/*****************************************************************************/

/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE	1

/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE	8192

#define OF_CPU			"PowerPC,MPC870@0"
#define OF_TBCLK		(MPC8XX_HZ / 16)
#define CONFIG_OF_HAS_BD_T	1
#define CONFIG_OF_HAS_UBOOT_ENV	1

#endif	/* __CONFIG_H */
Commit	Line	Data
6bdf4306 WD	1	/*
	2	* (C) Copyright 2000-2004
	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* Dan Malek, Embedded Edge, LLC, [email protected]
	26	* U-Boot port on STx XTc 8xx board
	27	* Mostly copied from Panto's NETTA2 board.
	28	*/
	29
	30	#ifndef __CONFIG_H
	31	#define __CONFIG_H
	32
	33	/*
	34	* High Level Configuration Options
	35	* (easy to change)
	36	*/
	37
	38	#define CONFIG_MPC875 1 /* This is a MPC875 CPU */
	39	#define CONFIG_STXXTC 1 /* ...on a STx XTc board */
	40
	41	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
	42	#undef CONFIG_8xx_CONS_SMC2
	43	#undef CONFIG_8xx_CONS_NONE
	44
670d9f13	45	#define CONFIG_BAUDRATE 115200 /* console baudrate = 115.2kbps */
6bdf4306 WD	46
	47	#define CONFIG_XIN 10000000 /* 10 MHz input xtal */
	48
	49	/* Select one of few clock rates defined later in this file.
	50	*/
	51	/* #define MPC8XX_HZ 50000000 */
	52	#define MPC8XX_HZ 66666666
	53
	54	#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
	55
	56	#if 0
	57	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	58	#else
	59	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	60	#endif
	61
	62	#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
	63
	64	#undef CONFIG_BOOTARGS
	65	#define CONFIG_BOOTCOMMAND \
	66	"tftpboot; " \
	67	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
	68	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
	69	"bootm"
	70
	71	#define CONFIG_AUTOSCRIPT
	72	#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
	73	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
	74
	75	#undef CONFIG_WATCHDOG /* watchdog disabled */
	76
	77	#define CONFIG_STATUS_LED 1 /* Status LED enabled */
	78	#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
	79
d3b8c1a7 JL	80	/*
	81	* BOOTP options
	82	*/
	83	#define CONFIG_BOOTP_SUBNETMASK
	84	#define CONFIG_BOOTP_GATEWAY
	85	#define CONFIG_BOOTP_HOSTNAME
	86	#define CONFIG_BOOTP_BOOTPATH
	87	#define CONFIG_BOOTP_BOOTFILESIZE
	88	#define CONFIG_BOOTP_NISDOMAIN
	89
6bdf4306 WD	90
	91	#undef CONFIG_MAC_PARTITION
	92	#undef CONFIG_DOS_PARTITION
	93
	94	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	95
	96	#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
	97	#define FEC_ENET 1 /* eth.c needs it that way... */
	98	#undef CFG_DISCOVER_PHY
	99	#define CONFIG_MII 1
	100	#undef CONFIG_RMII
	101
	102	#define CONFIG_ETHER_ON_FEC1 1
	103	#define CONFIG_FEC1_PHY 1 /* phy address of FEC */
	104	#undef CONFIG_FEC1_PHY_NORXERR
	105
	106	#define CONFIG_ETHER_ON_FEC2 1
	107	#define CONFIG_FEC2_PHY 3
	108	#undef CONFIG_FEC2_PHY_NORXERR
	109
	110	#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
	111
ef0df52a JL	112
	113	/*
	114	* Command line configuration.
	115	*/
	116	#include <config_cmd_default.h>
	117
	118	#define CONFIG_CMD_DHCP
	119	#define CONFIG_CMD_MII
	120	#define CONFIG_CMD_NAND
	121	#define CONFIG_CMD_NFS
	122	#define CONFIG_CMD_PING
	123
6bdf4306 WD	124
	125	#define CONFIG_BOARD_EARLY_INIT_F 1
	126	#define CONFIG_MISC_INIT_R
	127
6bdf4306 WD	128	/*
	129	* Miscellaneous configurable options
	130	*/
	131	#define CFG_LONGHELP /* undef to save memory */
	132	#define CFG_PROMPT "xtc> " /* Monitor Command Prompt */
	133
	134	#define CFG_HUSH_PARSER 1
	135	#define CFG_PROMPT_HUSH_PS2 "> "
	136
ef0df52a	137	#if defined(CONFIG_CMD_KGDB)
6bdf4306 WD	138	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	139	#else
	140	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	141	#endif
	142	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	143	#define CFG_MAXARGS 16 /* max number of command args */
	144	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	145
	146	#define CFG_MEMTEST_START 0x0300000 /* memtest works on */
	147	#define CFG_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
	148
	149	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	150
	151	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	152
	153	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	154
	155	/*
	156	* Low Level Configuration Settings
	157	* (address mappings, register initial values, etc.)
	158	* You should know what you are doing if you make changes here.
	159	*/
	160	/*-----------------------------------------------------------------------
	161	* Internal Memory Mapped Register
	162	*/
	163	#define CFG_IMMR 0xFF000000
	164
	165	/*-----------------------------------------------------------------------
	166	* Definitions for initial stack pointer and data area (in DPRAM)
	167	*/
	168	#define CFG_INIT_RAM_ADDR CFG_IMMR
	169	#define CFG_INIT_RAM_END 0x3000 /* End of used area in DPRAM */
	170	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	171	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	172	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	173
	174	/*-----------------------------------------------------------------------
	175	* Start addresses for the final memory configuration
	176	* (Set up by the startup code)
	177	* Please note that CFG_SDRAM_BASE _must_ start at 0
	178	*/
	179	#define CFG_SDRAM_BASE 0x00000000
	180	#define CFG_FLASH_BASE 0x40000000
	181	#if defined(DEBUG)
	182	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	183	#else
	184	#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	185	#endif
	186
	187	/* yes this is weird, I know :) */
	188	#define CFG_MONITOR_BASE (CFG_FLASH_BASE \| 0x00F00000)
	189	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	190
	191	#define CFG_RESET_ADDRESS 0x80000000
	192
	193	/*
	194	* For booting Linux, the board info and command line data
	195	* have to be in the first 8 MB of memory, since this is
	196	* the maximum mapped by the Linux kernel during initialization.
	197	*/
	198	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	199
	200	/*-----------------------------------------------------------------------
	201	* FLASH organization
202	*/
203	#define CFG_ENV_IS_IN_FLASH 1
204	#define CFG_ENV_SECT_SIZE 0x10000
205
206	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00000000)
207	#define CFG_ENV_OFFSET 0
208	#define CFG_ENV_SIZE 0x4000
209
210	#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + 0x00010000)
211	#define CFG_ENV_OFFSET_REDUND 0
212	#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
213
214	#define CFG_FLASH_CFI 1
215	#define CFG_FLASH_CFI_DRIVER 1
216	#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
217	#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
218	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
219
220	#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + 0x2000000 }
221
222	#define CFG_FLASH_PROTECTION
223
224	/*-----------------------------------------------------------------------
225	* Cache Configuration
226	*/
227	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
ef0df52a	228	#if defined(CONFIG_CMD_KGDB)
6bdf4306 WD	229	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	230	#endif
	231
	232	/*-----------------------------------------------------------------------
	233	* SYPCR - System Protection Control 11-9
	234	* SYPCR can only be written once after reset!
	235	*-----------------------------------------------------------------------
	236	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	237	*/
	238	#if defined(CONFIG_WATCHDOG)
	239	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	240	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	241	#else
	242	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	243	#endif
	244
	245	/*-----------------------------------------------------------------------
	246	* SIUMCR - SIU Module Configuration 11-6
	247	*-----------------------------------------------------------------------
	248	* PCMCIA config., multi-function pin tri-state
	249	*/
	250	#define CFG_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01 \| SIUMCR_FRC \| SIUMCR_GB5E)
	251
	252	/*-----------------------------------------------------------------------
	253	* TBSCR - Time Base Status and Control 11-26
	254	*-----------------------------------------------------------------------
	255	* Clear Reference Interrupt Status, Timebase freezing enabled
	256	*/
	257	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
	258
	259	/*-----------------------------------------------------------------------
	260	* RTCSC - Real-Time Clock Status and Control Register 11-27
	261	*-----------------------------------------------------------------------
	262	*/
	263	#define CFG_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)
	264
	265	/*-----------------------------------------------------------------------
	266	* PISCR - Periodic Interrupt Status and Control 11-31
	267	*-----------------------------------------------------------------------
	268	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	269	*/
	270	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)
	271
	272	/*-----------------------------------------------------------------------
	273	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	274	*-----------------------------------------------------------------------
	275	* Reset PLL lock status sticky bit, timer expired status bit and timer
	276	* interrupt status bit
	277	*
	278	*/
	279
	280	#if CONFIG_XIN == 10000000
	281
	282	#if MPC8XX_HZ == 50000000
	283	#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) \| (0 << PLPRCR_MFD_SHIFT) \| \
	284	(1 << PLPRCR_S_SHIFT) \| (10 << PLPRCR_MFI_SHIFT) \| (0 << PLPRCR_PDF_SHIFT) \| \
	285	PLPRCR_TEXPS)
	286	#elif MPC8XX_HZ == 66666666
	287	#define CFG_PLPRCR ((1 << PLPRCR_MFN_SHIFT) \| (2 << PLPRCR_MFD_SHIFT) \| \
	288	(1 << PLPRCR_S_SHIFT) \| (13 << PLPRCR_MFI_SHIFT) \| (0 << PLPRCR_PDF_SHIFT) \| \
	289	PLPRCR_TEXPS)
	290	#else
	291	#error unsupported CPU freq for XIN = 10MHz
	292	#endif
293	#else
294	#error unsupported freq for XIN (must be 10MHz)
295	#endif
296
297
298	/*
299	*-----------------------------------------------------------------------
300	* SCCR - System Clock and reset Control Register 15-27
301	*-----------------------------------------------------------------------
302	* Set clock output, timebase and RTC source and divider,
303	* power management and some other internal clocks
304	*
305	* Note: When TBS == 0 the timebase is independent of current cpu clock.
306	*/
307
308	#define SCCR_MASK SCCR_EBDF11
309	#if MPC8XX_HZ > 66666666
310	#define CFG_SCCR (/* SCCR_TBS \| */ SCCR_CRQEN \| \
311	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
312	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
313	SCCR_DFALCD00 \| SCCR_EBDF01)
314	#else
315	#define CFG_SCCR (/* SCCR_TBS \| */ SCCR_CRQEN \| \
316	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
317	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
318	SCCR_DFALCD00)
319	#endif
320
321	/*-----------------------------------------------------------------------
322	*
323	*-----------------------------------------------------------------------
324	*
325	*/
326	/#define CFG_DER 0x2002000F/
327	#define CFG_DER 0
328
329	/*
330	* Init Memory Controller:
331	*
332	* BR0/1 and OR0/1 (FLASH)
333	*/
334
335	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
336	#define FLASH_BASE1_PRELIM 0x42000000 /* FLASH bank #1 */
337
338	/* used to re-map FLASH both when starting from SRAM or FLASH:
339	* restrict access enough to keep SRAM working (if any)
340	* but not too much to meddle with FLASH accesses
341	*/
342
343	#define FLASH_BANK_MAX_SIZE 0x01000000 /* max size per chip */
344
345	#define CFG_REMAP_OR_AM 0x80000000
346	#define CFG_PRELIM_OR_AM (0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))
347
348	/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
349	#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM \| OR_BI \| OR_SCY_5_CLK \| OR_TRLX)
350
351	#define CFG_OR0_REMAP (CFG_REMAP_OR_AM \| CFG_OR_TIMING_FLASH)
352	#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_FLASH)
353	#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_PS_16 \| BR_V )
354
355	#define CFG_OR1_PRELIM ((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) \| CFG_OR_TIMING_FLASH)
356	#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_PS_16 \| BR_V )
357
358	/*
359	* BR4 and OR4 (SDRAM)
360	*
361	*/
362	#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */
363	#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
364
365	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
366	#define CFG_OR_TIMING_SDRAM (OR_CSNT_SAM \| OR_G5LS)
367
368	#define CFG_OR4_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) \| CFG_OR_TIMING_SDRAM)
369	#define CFG_BR4_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_PS_32 \| BR_V)
370
371	/*
372	* Memory Periodic Timer Prescaler
373	*/
374
375	/*
376	* Memory Periodic Timer Prescaler
377	*
378	* The Divider for PTA (refresh timer) configuration is based on an
379	* example SDRAM configuration (64 MBit, one bank). The adjustment to
380	* the number of chip selects (NCS) and the actually needed refresh
381	* rate is done by setting MPTPR.
382	*
383	* PTA is calculated from
384	* PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
385	*
386	* gclk CPU clock (not bus clock!)
387	* Trefresh Refresh cycle * 4 (four word bursts used)
388	*
389	* 4096 Rows from SDRAM example configuration
390	* 1000 factor s -> ms
391	* 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
392	* 4 Number of refresh cycles per period
393	* 64 Refresh cycle in ms per number of rows
394	* --------------------------------------------
395	* Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
396	*
397	* 50 MHz => 50.000.000 / Divider = 98
398	* 66 Mhz => 66.000.000 / Divider = 129
399	* 80 Mhz => 80.000.000 / Divider = 156
400	*/
401
402	#define CFG_MAMR_PTA 234
403
404	/*
405	* For 16 MBit, refresh rates could be 31.3 us
406	* (= 64 ms / 2K = 125 / quad bursts).
407	* For a simpler initialization, 15.6 us is used instead.
408	*
409	* #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
410	* #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
411	*/
412	#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
413	#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
414
415	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
416	#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
417	#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
418
419	/*
420	* MAMR settings for SDRAM
421	*/
422
423	/* 8 column SDRAM */
424	#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
425	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
426	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
427
428	/* 9 column SDRAM */
429	#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
430	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
431	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
432
433	/*
434	* Internal Definitions
435	*
436	* Boot Flags
437	*/
438	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
439	#define BOOTFLAG_WARM 0x02 /* Software reboot */
440
441	#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
442
443	/****************************************************************/
444
445	#define NAND_SIZE 0x00010000 /* 64K */
446	#define NAND_BASE 0xF1000000
447
448	/****************************************************************/
449
450	/* NAND */
6db39708	451	#define CFG_NAND_LEGACY
6bdf4306 WD	452	#define CFG_NAND_BASE NAND_BASE
	453	#define CONFIG_MTD_NAND_ECC_JFFS2
	454	#define CONFIG_MTD_NAND_VERIFY_WRITE
	455	#define CONFIG_MTD_NAND_UNSAFE
	456
	457	#define CFG_MAX_NAND_DEVICE 1
	458	#undef NAND_NO_RB
	459
	460	#define SECTORSIZE 512
	461	#define ADDR_COLUMN 1
	462	#define ADDR_PAGE 2
	463	#define ADDR_COLUMN_PAGE 3
	464	#define NAND_ChipID_UNKNOWN 0x00
	465	#define NAND_MAX_FLOORS 1
	466	#define NAND_MAX_CHIPS 1
	467
	468	/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */
	469	#define NAND_DISABLE_CE(nand) \
	470	do { \
	471	(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) \|= (1 << (15 - 7)); \
	472	} while(0)
	473
	474	#define NAND_ENABLE_CE(nand) \
	475	do { \
	476	(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \
	477	} while(0)
	478
	479	#define NAND_CTL_CLRALE(nandptr) \
	480	do { \
	481	(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \
	482	} while(0)
	483
	484	#define NAND_CTL_SETALE(nandptr) \
	485	do { \
	486	(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) \|= (1 << (15 - 15)); \
	487	} while(0)
	488
	489	#define NAND_CTL_CLRCLE(nandptr) \
	490	do { \
	491	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \
	492	} while(0)
	493
	494	#define NAND_CTL_SETCLE(nandptr) \
	495	do { \
	496	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) \|= (1 << (31 - 23)); \
	497	} while(0)
	498
	499	#ifndef NAND_NO_RB
	500	#define NAND_WAIT_READY(nand) \
	501	do { \
	502	int _tries = 0; \
	503	while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \
	504	if (++_tries > 100000) \
	505	break; \
	506	} while (0)
	507	#else
	508	#define NAND_WAIT_READY(nand) udelay(12)
	509	#endif
	510
	511	#define WRITE_NAND_COMMAND(d, adr) \
	512	do { \
	513	(volatile unsigned char )((unsigned long)(adr)) = (unsigned char)(d); \
	514	} while(0)
	515
516	#define WRITE_NAND_ADDRESS(d, adr) \
517	do { \
518	(volatile unsigned char )((unsigned long)(adr)) = (unsigned char)(d); \
519	} while(0)
520
521	#define WRITE_NAND(d, adr) \
522	do { \
523	(volatile unsigned char )((unsigned long)(adr)) = (unsigned char)(d); \
524	} while(0)
525
526	#define READ_NAND(adr) \
527	((unsigned char)((volatile unsigned char )(unsigned long)(adr)))
528
529	/*****************************************************************************/
530
531	#define CFG_DIRECT_FLASH_TFTP
532	#define CFG_DIRECT_NAND_TFTP
533
534	/*****************************************************************************/
535
536	/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB,
537	* CxOE and CxRESET. We use the CxOE.
538	*/
539	#define STATUS_LED_BIT 0x00000080 /* bit 24 */
540
541	#define STATUS_LED_PERIOD (CFG_HZ / 2)
542	#define STATUS_LED_STATE STATUS_LED_BLINKING
543
544	#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
545	#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
546
547	#ifndef __ASSEMBLY__
548
549	/* LEDs */
550
551	/* led_id_t is unsigned int mask */
552	typedef unsigned int led_id_t;
553
554	#define __led_toggle(_msk) \
555	do { \
556	((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
557	} while(0)
558
559	#define __led_set(_msk, _st) \
560	do { \
561	if ((_st)) \
562	((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb \|= (_msk); \
563	else \
564	((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
565	} while(0)
566
567	#define __led_init(msk, st) __led_set(msk, st)
568
569	#endif
570
571	/******************************************************************************/
572
573	#define CFG_CONSOLE_IS_IN_ENV 1
574	#define CFG_CONSOLE_OVERWRITE_ROUTINE 1
575	#define CFG_CONSOLE_ENV_OVERWRITE 1
576
577	/******************************************************************************/
578
579	/* use board specific hardware */
580	#undef CONFIG_WATCHDOG /* watchdog disabled */
581	#define CONFIG_HW_WATCHDOG
582	#define CONFIG_SHOW_ACTIVITY
583
584	/*****************************************************************************/
585
586	#define CONFIG_AUTO_COMPLETE 1
587	#define CONFIG_CRC32_VERIFY 1
588	#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
589
070610c5 WD	590	/*****************************************************************************/
	591
	592	/* pass open firmware flat tree */
	593	#define CONFIG_OF_FLAT_TREE 1
6bdf4306	594
070610c5 WD	595	/* maximum size of the flat tree (8K) */
070610c5 WD	596	#define OF_FLAT_TREE_MAX_SIZE 8192
6bdf4306	597
070610c5 WD	598	#define OF_CPU "PowerPC,MPC870@0"
070610c5 WD	599	#define OF_TBCLK (MPC8XX_HZ / 16)
e4f880ed KG	600	#define CONFIG_OF_HAS_BD_T 1
e4f880ed KG	601	#define CONFIG_OF_HAS_UBOOT_ENV 1
6bdf4306 WD	602
6bdf4306 WD	603	#endif /* __CONFIG_H */