]>
Commit | Line | Data |
---|---|---|
6609c266 PF |
1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | /* | |
3 | * Copyright 2018 NXP | |
4 | * | |
5 | * Peng Fan <[email protected]> | |
6 | */ | |
7 | ||
8 | ||
9 | #include "imagetool.h" | |
10 | #include <image.h> | |
11 | #include "imximage.h" | |
12 | #include "compiler.h" | |
13 | ||
14 | static uint32_t ap_start_addr, sld_start_addr, sld_src_off; | |
15 | static char *ap_img, *sld_img, *signed_hdmi; | |
16 | static imx_header_v3_t imx_header[2]; /* At most there are 3 IVT headers */ | |
17 | static uint32_t rom_image_offset; | |
18 | static uint32_t sector_size = 0x200; | |
19 | static uint32_t image_off; | |
20 | static uint32_t sld_header_off; | |
21 | static uint32_t ivt_offset; | |
22 | static uint32_t using_fit; | |
23 | ||
b8f16834 PF |
24 | #define ROM_V1 1 |
25 | #define ROM_V2 2 | |
26 | ||
27 | static uint32_t rom_version = ROM_V1; | |
28 | ||
6609c266 PF |
29 | #define CSF_SIZE 0x2000 |
30 | #define HDMI_IVT_ID 0 | |
31 | #define IMAGE_IVT_ID 1 | |
32 | ||
33 | #define HDMI_FW_SIZE 0x17000 /* Use Last 0x1000 for IVT and CSF */ | |
34 | #define ALIGN_SIZE 0x1000 | |
325bb40f FE |
35 | #define ALIGN_IMX(x, a) __ALIGN_MASK_IMX((x), (__typeof__(x))(a) - 1, a) |
36 | #define __ALIGN_MASK_IMX(x, mask, mask2) (((x) + (mask)) / (mask2) * (mask2)) | |
6609c266 PF |
37 | |
38 | static uint32_t get_cfg_value(char *token, char *name, int linenr) | |
39 | { | |
40 | char *endptr; | |
41 | uint32_t value; | |
42 | ||
43 | errno = 0; | |
44 | value = strtoul(token, &endptr, 16); | |
45 | if (errno || token == endptr) { | |
46 | fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", | |
47 | name, linenr, token); | |
48 | exit(EXIT_FAILURE); | |
49 | } | |
50 | return value; | |
51 | } | |
52 | ||
53 | int imx8mimage_check_params(struct image_tool_params *params) | |
54 | { | |
55 | return 0; | |
56 | } | |
57 | ||
58 | static void imx8mimage_set_header(void *ptr, struct stat *sbuf, int ifd, | |
59 | struct image_tool_params *params) | |
60 | { | |
61 | } | |
62 | ||
63 | static void imx8mimage_print_header(const void *ptr) | |
64 | { | |
65 | } | |
66 | ||
67 | static int imx8mimage_check_image_types(uint8_t type) | |
68 | { | |
69 | return (type == IH_TYPE_IMX8MIMAGE) ? EXIT_SUCCESS : EXIT_FAILURE; | |
70 | } | |
71 | ||
72 | static table_entry_t imx8mimage_cmds[] = { | |
73 | {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, | |
74 | {CMD_FIT, "FIT", "fit image", }, | |
75 | {CMD_SIGNED_HDMI, "SIGNED_HDMI", "signed hdmi image", }, | |
76 | {CMD_LOADER, "LOADER", "loader image", }, | |
77 | {CMD_SECOND_LOADER, "SECOND_LOADER", "2nd loader image", }, | |
78 | {CMD_DDR_FW, "DDR_FW", "ddr firmware", }, | |
b8f16834 | 79 | {CMD_ROM_VERSION, "ROM_VERSION", "rom version", }, |
6609c266 PF |
80 | {-1, "", "", }, |
81 | }; | |
82 | ||
83 | static table_entry_t imx8mimage_ivt_offset[] = { | |
84 | {0x400, "sd", "sd/emmc",}, | |
85 | {0x400, "emmc_fastboot", "emmc fastboot",}, | |
86 | {0x1000, "fspi", "flexspi", }, | |
87 | {-1, "", "Invalid", }, | |
88 | }; | |
89 | ||
90 | static void parse_cfg_cmd(int32_t cmd, char *token, char *name, int lineno) | |
91 | { | |
92 | switch (cmd) { | |
93 | case CMD_BOOT_FROM: | |
94 | ivt_offset = get_table_entry_id(imx8mimage_ivt_offset, | |
95 | "imx8mimage ivt offset", | |
96 | token); | |
97 | if (!strncmp(token, "sd", 2)) | |
98 | rom_image_offset = 0x8000; | |
b8f16834 PF |
99 | |
100 | if (rom_version == ROM_V2) | |
101 | ivt_offset = 0; | |
6609c266 PF |
102 | break; |
103 | case CMD_LOADER: | |
104 | ap_img = token; | |
105 | break; | |
106 | case CMD_SECOND_LOADER: | |
107 | sld_img = token; | |
108 | break; | |
109 | case CMD_SIGNED_HDMI: | |
110 | signed_hdmi = token; | |
6609c266 PF |
111 | break; |
112 | case CMD_DDR_FW: | |
113 | /* Do nothing */ | |
114 | break; | |
b8f16834 PF |
115 | case CMD_ROM_VERSION: |
116 | if (!strncmp(token, "v2", 2)) { | |
117 | rom_version = ROM_V2; | |
118 | ivt_offset = 0; | |
119 | } else if (!strncmp(token, "v1", 2)) { | |
120 | rom_version = ROM_V1; | |
121 | } | |
122 | break; | |
123 | ||
6609c266 PF |
124 | } |
125 | } | |
126 | ||
127 | static void parse_cfg_fld(int32_t *cmd, char *token, | |
128 | char *name, int lineno, int fld) | |
129 | { | |
130 | switch (fld) { | |
131 | case CFG_COMMAND: | |
132 | *cmd = get_table_entry_id(imx8mimage_cmds, | |
133 | "imx8mimage commands", token); | |
134 | if (*cmd < 0) { | |
135 | fprintf(stderr, "Error: %s[%d] - Invalid command" "(%s)\n", | |
136 | name, lineno, token); | |
137 | exit(EXIT_FAILURE); | |
138 | } | |
4d655bfe PF |
139 | switch (*cmd) { |
140 | case CMD_FIT: | |
141 | using_fit = 1; | |
142 | break; | |
143 | } | |
6609c266 PF |
144 | break; |
145 | case CFG_REG_SIZE: | |
146 | parse_cfg_cmd(*cmd, token, name, lineno); | |
147 | break; | |
148 | case CFG_REG_ADDRESS: | |
149 | switch (*cmd) { | |
150 | case CMD_LOADER: | |
151 | ap_start_addr = get_cfg_value(token, name, lineno); | |
152 | break; | |
153 | case CMD_SECOND_LOADER: | |
154 | sld_start_addr = get_cfg_value(token, name, lineno); | |
155 | break; | |
156 | } | |
157 | break; | |
158 | case CFG_REG_VALUE: | |
159 | switch (*cmd) { | |
160 | case CMD_SECOND_LOADER: | |
161 | sld_src_off = get_cfg_value(token, name, lineno); | |
162 | break; | |
163 | } | |
164 | default: | |
165 | break; | |
166 | } | |
167 | } | |
168 | ||
169 | static uint32_t parse_cfg_file(char *name) | |
170 | { | |
171 | FILE *fd = NULL; | |
172 | char *line = NULL; | |
173 | char *token, *saveptr1, *saveptr2; | |
174 | int lineno = 0; | |
175 | int fld; | |
176 | size_t len; | |
177 | int32_t cmd; | |
178 | ||
179 | fd = fopen(name, "r"); | |
180 | if (fd == 0) { | |
181 | fprintf(stderr, "Error: %s - Can't open cfg file\n", name); | |
182 | exit(EXIT_FAILURE); | |
183 | } | |
184 | ||
185 | /* | |
186 | * Very simple parsing, line starting with # are comments | |
187 | * and are dropped | |
188 | */ | |
189 | while ((getline(&line, &len, fd)) > 0) { | |
190 | lineno++; | |
191 | ||
192 | token = strtok_r(line, "\r\n", &saveptr1); | |
193 | if (!token) | |
194 | continue; | |
195 | ||
196 | /* Check inside the single line */ | |
197 | for (fld = CFG_COMMAND, cmd = CFG_INVALID, | |
198 | line = token; ; line = NULL, fld++) { | |
199 | token = strtok_r(line, " \t", &saveptr2); | |
200 | if (!token) | |
201 | break; | |
202 | ||
203 | /* Drop all text starting with '#' as comments */ | |
204 | if (token[0] == '#') | |
205 | break; | |
206 | ||
207 | parse_cfg_fld(&cmd, token, name, lineno, fld); | |
208 | } | |
209 | } | |
210 | ||
211 | return 0; | |
212 | } | |
213 | ||
214 | static void fill_zero(int ifd, int size, int offset) | |
215 | { | |
216 | int fill_size; | |
217 | uint8_t zeros[4096]; | |
218 | int ret; | |
219 | ||
220 | memset(zeros, 0, sizeof(zeros)); | |
221 | ||
222 | ret = lseek(ifd, offset, SEEK_SET); | |
223 | if (ret < 0) { | |
224 | fprintf(stderr, "%s seek: %s\n", __func__, strerror(errno)); | |
225 | exit(EXIT_FAILURE); | |
226 | } | |
227 | ||
228 | while (size) { | |
229 | if (size > 4096) | |
230 | fill_size = 4096; | |
231 | else | |
232 | fill_size = size; | |
233 | ||
234 | if (write(ifd, (char *)&zeros, fill_size) != fill_size) { | |
235 | fprintf(stderr, "Write error: %s\n", | |
236 | strerror(errno)); | |
237 | exit(EXIT_FAILURE); | |
238 | } | |
239 | ||
240 | size -= fill_size; | |
241 | }; | |
242 | } | |
243 | ||
244 | static void copy_file(int ifd, const char *datafile, int pad, int offset, | |
245 | int datafile_offset) | |
246 | { | |
247 | int dfd; | |
248 | struct stat sbuf; | |
249 | unsigned char *ptr; | |
250 | int tail; | |
16841a6a | 251 | uint64_t zero = 0; |
6609c266 PF |
252 | uint8_t zeros[4096]; |
253 | int size, ret; | |
254 | ||
255 | memset(zeros, 0, sizeof(zeros)); | |
256 | ||
257 | dfd = open(datafile, O_RDONLY | O_BINARY); | |
258 | if (dfd < 0) { | |
259 | fprintf(stderr, "Can't open %s: %s\n", | |
260 | datafile, strerror(errno)); | |
261 | exit(EXIT_FAILURE); | |
262 | } | |
263 | ||
264 | if (fstat(dfd, &sbuf) < 0) { | |
265 | fprintf(stderr, "Can't stat %s: %s\n", | |
266 | datafile, strerror(errno)); | |
267 | exit(EXIT_FAILURE); | |
268 | } | |
269 | ||
270 | ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0); | |
271 | if (ptr == MAP_FAILED) { | |
272 | fprintf(stderr, "Can't read %s: %s\n", | |
273 | datafile, strerror(errno)); | |
c7b87111 | 274 | goto err_mmap; |
6609c266 PF |
275 | } |
276 | ||
277 | size = sbuf.st_size - datafile_offset; | |
278 | ret = lseek(ifd, offset, SEEK_SET); | |
279 | if (ret < 0) { | |
280 | fprintf(stderr, "lseek ifd fail\n"); | |
281 | exit(EXIT_FAILURE); | |
282 | } | |
283 | ||
284 | if (write(ifd, ptr + datafile_offset, size) != size) { | |
285 | fprintf(stderr, "Write error %s\n", | |
286 | strerror(errno)); | |
287 | exit(EXIT_FAILURE); | |
288 | } | |
289 | ||
290 | tail = size % 4; | |
291 | pad = pad - size; | |
292 | if (pad == 1 && tail != 0) { | |
293 | if (write(ifd, (char *)&zero, 4 - tail) != 4 - tail) { | |
294 | fprintf(stderr, "Write error on %s\n", | |
295 | strerror(errno)); | |
296 | exit(EXIT_FAILURE); | |
297 | } | |
298 | } else if (pad > 1) { | |
299 | while (pad > 0) { | |
300 | int todo = sizeof(zeros); | |
301 | ||
302 | if (todo > pad) | |
303 | todo = pad; | |
304 | if (write(ifd, (char *)&zeros, todo) != todo) { | |
305 | fprintf(stderr, "Write error: %s\n", | |
306 | strerror(errno)); | |
307 | exit(EXIT_FAILURE); | |
308 | } | |
309 | pad -= todo; | |
310 | } | |
311 | } | |
312 | ||
313 | munmap((void *)ptr, sbuf.st_size); | |
c7b87111 | 314 | err_mmap: |
6609c266 PF |
315 | close(dfd); |
316 | } | |
317 | ||
318 | /* Return this IVT offset in the final output file */ | |
319 | static int generate_ivt_for_fit(int fd, int fit_offset, uint32_t ep, | |
320 | uint32_t *fit_load_addr) | |
321 | { | |
322 | image_header_t image_header; | |
323 | int ret; | |
324 | ||
325 | uint32_t fit_size, load_addr; | |
326 | int align_len = 64 - 1; /* 64 is cacheline size */ | |
327 | ||
328 | ret = lseek(fd, fit_offset, SEEK_SET); | |
329 | if (ret < 0) { | |
330 | fprintf(stderr, "lseek fd fail for fit\n"); | |
331 | exit(EXIT_FAILURE); | |
332 | } | |
333 | ||
334 | if (read(fd, (char *)&image_header, sizeof(image_header_t)) != | |
335 | sizeof(image_header_t)) { | |
336 | fprintf(stderr, "generate_ivt_for_fit read failed: %s\n", | |
337 | strerror(errno)); | |
338 | exit(EXIT_FAILURE); | |
339 | } | |
340 | ||
341 | if (be32_to_cpu(image_header.ih_magic) != FDT_MAGIC) { | |
342 | fprintf(stderr, "%s error: not a FIT file\n", __func__); | |
343 | exit(EXIT_FAILURE); | |
344 | } | |
345 | ||
346 | fit_size = fdt_totalsize(&image_header); | |
6609c266 | 347 | |
325bb40f | 348 | fit_size = ALIGN_IMX(fit_size, ALIGN_SIZE); |
6609c266 PF |
349 | |
350 | ret = lseek(fd, fit_offset + fit_size, SEEK_SET); | |
351 | if (ret < 0) { | |
352 | fprintf(stderr, "lseek fd fail for fit\n"); | |
353 | exit(EXIT_FAILURE); | |
354 | } | |
355 | ||
356 | /* | |
357 | * ep is the u-boot entry. SPL loads the FIT before the u-boot | |
358 | * address. 0x2000 is for CSF_SIZE | |
359 | */ | |
360 | load_addr = (ep - (fit_size + CSF_SIZE) - 512 - align_len) & | |
361 | ~align_len; | |
362 | ||
363 | flash_header_v2_t ivt_header = { { 0xd1, 0x2000, 0x40 }, | |
364 | load_addr, 0, 0, 0, | |
365 | (load_addr + fit_size), | |
366 | (load_addr + fit_size + 0x20), | |
367 | 0 }; | |
368 | ||
369 | if (write(fd, &ivt_header, sizeof(flash_header_v2_t)) != | |
370 | sizeof(flash_header_v2_t)) { | |
371 | fprintf(stderr, "IVT writing error on fit image\n"); | |
372 | exit(EXIT_FAILURE); | |
373 | } | |
374 | ||
375 | *fit_load_addr = load_addr; | |
376 | ||
377 | return fit_offset + fit_size; | |
378 | } | |
379 | ||
380 | static void dump_header_v2(imx_header_v3_t *imx_header, int index) | |
381 | { | |
382 | const char *ivt_name[2] = {"HDMI FW", "LOADER IMAGE"}; | |
383 | ||
384 | fprintf(stdout, "========= IVT HEADER [%s] =========\n", | |
385 | ivt_name[index]); | |
386 | fprintf(stdout, "header.tag: \t\t0x%x\n", | |
387 | imx_header[index].fhdr.header.tag); | |
388 | fprintf(stdout, "header.length: \t\t0x%x\n", | |
389 | imx_header[index].fhdr.header.length); | |
390 | fprintf(stdout, "header.version: \t0x%x\n", | |
391 | imx_header[index].fhdr.header.version); | |
392 | fprintf(stdout, "entry: \t\t\t0x%x\n", | |
393 | imx_header[index].fhdr.entry); | |
394 | fprintf(stdout, "reserved1: \t\t0x%x\n", | |
395 | imx_header[index].fhdr.reserved1); | |
396 | fprintf(stdout, "dcd_ptr: \t\t0x%x\n", | |
397 | imx_header[index].fhdr.dcd_ptr); | |
398 | fprintf(stdout, "boot_data_ptr: \t\t0x%x\n", | |
399 | imx_header[index].fhdr.boot_data_ptr); | |
400 | fprintf(stdout, "self: \t\t\t0x%x\n", | |
401 | imx_header[index].fhdr.self); | |
402 | fprintf(stdout, "csf: \t\t\t0x%x\n", | |
403 | imx_header[index].fhdr.csf); | |
404 | fprintf(stdout, "reserved2: \t\t0x%x\n", | |
405 | imx_header[index].fhdr.reserved2); | |
406 | ||
407 | fprintf(stdout, "boot_data.start: \t0x%x\n", | |
408 | imx_header[index].boot_data.start); | |
409 | fprintf(stdout, "boot_data.size: \t0x%x\n", | |
410 | imx_header[index].boot_data.size); | |
411 | fprintf(stdout, "boot_data.plugin: \t0x%x\n", | |
412 | imx_header[index].boot_data.plugin); | |
413 | } | |
414 | ||
415 | void build_image(int ofd) | |
416 | { | |
417 | int file_off, header_hdmi_off = 0, header_image_off; | |
418 | int hdmi_fd, ap_fd, sld_fd; | |
419 | uint32_t sld_load_addr = 0; | |
420 | uint32_t csf_off, sld_csf_off = 0; | |
421 | int ret; | |
422 | struct stat sbuf; | |
423 | ||
424 | if (!ap_img) { | |
425 | fprintf(stderr, "No LOADER image specificed\n"); | |
426 | exit(EXIT_FAILURE); | |
427 | } | |
428 | ||
429 | file_off = 0; | |
430 | ||
431 | if (signed_hdmi) { | |
432 | header_hdmi_off = file_off + ivt_offset; | |
433 | ||
434 | hdmi_fd = open(signed_hdmi, O_RDONLY | O_BINARY); | |
435 | if (hdmi_fd < 0) { | |
436 | fprintf(stderr, "%s: Can't open: %s\n", | |
437 | signed_hdmi, strerror(errno)); | |
438 | exit(EXIT_FAILURE); | |
439 | } | |
440 | ||
441 | if (fstat(hdmi_fd, &sbuf) < 0) { | |
442 | fprintf(stderr, "%s: Can't stat: %s\n", | |
443 | signed_hdmi, strerror(errno)); | |
444 | exit(EXIT_FAILURE); | |
445 | } | |
446 | close(hdmi_fd); | |
447 | ||
448 | /* | |
449 | * Aligned to 104KB = 92KB FW image + 0x8000 | |
450 | * (IVT and alignment) + 0x4000 (second IVT + CSF) | |
451 | */ | |
325bb40f | 452 | file_off += ALIGN_IMX(sbuf.st_size, |
6609c266 PF |
453 | HDMI_FW_SIZE + 0x2000 + 0x1000); |
454 | } | |
455 | ||
456 | header_image_off = file_off + ivt_offset; | |
457 | ||
458 | ap_fd = open(ap_img, O_RDONLY | O_BINARY); | |
459 | if (ap_fd < 0) { | |
460 | fprintf(stderr, "%s: Can't open: %s\n", | |
461 | ap_img, strerror(errno)); | |
462 | exit(EXIT_FAILURE); | |
463 | } | |
464 | if (fstat(ap_fd, &sbuf) < 0) { | |
465 | fprintf(stderr, "%s: Can't stat: %s\n", | |
466 | ap_img, strerror(errno)); | |
467 | exit(EXIT_FAILURE); | |
468 | } | |
469 | close(ap_fd); | |
470 | ||
471 | imx_header[IMAGE_IVT_ID].fhdr.header.tag = IVT_HEADER_TAG; /* 0xD1 */ | |
472 | imx_header[IMAGE_IVT_ID].fhdr.header.length = | |
473 | cpu_to_be16(sizeof(flash_header_v2_t)); | |
474 | imx_header[IMAGE_IVT_ID].fhdr.header.version = IVT_VERSION_V3; /* 0x41 */ | |
475 | imx_header[IMAGE_IVT_ID].fhdr.entry = ap_start_addr; | |
476 | imx_header[IMAGE_IVT_ID].fhdr.self = ap_start_addr - | |
477 | sizeof(imx_header_v3_t); | |
478 | imx_header[IMAGE_IVT_ID].fhdr.dcd_ptr = 0; | |
479 | imx_header[IMAGE_IVT_ID].fhdr.boot_data_ptr = | |
480 | imx_header[IMAGE_IVT_ID].fhdr.self + | |
481 | offsetof(imx_header_v3_t, boot_data); | |
482 | imx_header[IMAGE_IVT_ID].boot_data.start = | |
483 | imx_header[IMAGE_IVT_ID].fhdr.self - ivt_offset; | |
484 | imx_header[IMAGE_IVT_ID].boot_data.size = | |
325bb40f | 485 | ALIGN_IMX(sbuf.st_size + sizeof(imx_header_v3_t) + ivt_offset, |
6609c266 PF |
486 | sector_size); |
487 | ||
488 | image_off = header_image_off + sizeof(imx_header_v3_t); | |
489 | file_off += imx_header[IMAGE_IVT_ID].boot_data.size; | |
490 | ||
491 | imx_header[IMAGE_IVT_ID].boot_data.plugin = 0; | |
492 | imx_header[IMAGE_IVT_ID].fhdr.csf = | |
493 | imx_header[IMAGE_IVT_ID].boot_data.start + | |
494 | imx_header[IMAGE_IVT_ID].boot_data.size; | |
495 | ||
496 | imx_header[IMAGE_IVT_ID].boot_data.size += CSF_SIZE; /* 8K region dummy CSF */ | |
497 | ||
498 | csf_off = file_off; | |
499 | file_off += CSF_SIZE; | |
500 | ||
501 | /* Second boot loader image */ | |
502 | if (sld_img) { | |
503 | if (!using_fit) { | |
504 | fprintf(stderr, "Not support no fit\n"); | |
505 | exit(EXIT_FAILURE); | |
506 | } else { | |
507 | sld_header_off = sld_src_off - rom_image_offset; | |
508 | /* | |
509 | * Record the second bootloader relative offset in | |
510 | * image's IVT reserved1 | |
511 | */ | |
b8f16834 PF |
512 | if (rom_version == ROM_V1) { |
513 | imx_header[IMAGE_IVT_ID].fhdr.reserved1 = | |
514 | sld_header_off - header_image_off; | |
515 | } | |
6609c266 PF |
516 | sld_fd = open(sld_img, O_RDONLY | O_BINARY); |
517 | if (sld_fd < 0) { | |
518 | fprintf(stderr, "%s: Can't open: %s\n", | |
519 | sld_img, strerror(errno)); | |
520 | exit(EXIT_FAILURE); | |
521 | } | |
522 | ||
523 | if (fstat(sld_fd, &sbuf) < 0) { | |
524 | fprintf(stderr, "%s: Can't stat: %s\n", | |
525 | sld_img, strerror(errno)); | |
526 | exit(EXIT_FAILURE); | |
527 | } | |
528 | ||
529 | close(sld_fd); | |
530 | ||
531 | file_off = sld_header_off; | |
532 | file_off += sbuf.st_size + sizeof(image_header_t); | |
533 | } | |
534 | } | |
535 | ||
536 | if (signed_hdmi) { | |
537 | header_hdmi_off -= ivt_offset; | |
538 | ret = lseek(ofd, header_hdmi_off, SEEK_SET); | |
539 | if (ret < 0) { | |
540 | fprintf(stderr, "lseek ofd fail for hdmi\n"); | |
541 | exit(EXIT_FAILURE); | |
542 | } | |
543 | ||
544 | /* The signed HDMI FW has 0x400 IVT offset, need remove it */ | |
545 | copy_file(ofd, signed_hdmi, 0, header_hdmi_off, 0x400); | |
546 | } | |
547 | ||
548 | /* Main Image */ | |
549 | header_image_off -= ivt_offset; | |
550 | image_off -= ivt_offset; | |
551 | ret = lseek(ofd, header_image_off, SEEK_SET); | |
552 | if (ret < 0) { | |
553 | fprintf(stderr, "lseek ofd fail\n"); | |
554 | exit(EXIT_FAILURE); | |
555 | } | |
556 | ||
557 | /* Write image header */ | |
558 | if (write(ofd, &imx_header[IMAGE_IVT_ID], sizeof(imx_header_v3_t)) != | |
559 | sizeof(imx_header_v3_t)) { | |
560 | fprintf(stderr, "error writing image hdr\n"); | |
561 | exit(1); | |
562 | } | |
563 | ||
564 | copy_file(ofd, ap_img, 0, image_off, 0); | |
565 | ||
566 | csf_off -= ivt_offset; | |
567 | fill_zero(ofd, CSF_SIZE, csf_off); | |
568 | ||
569 | if (sld_img) { | |
570 | sld_header_off -= ivt_offset; | |
571 | ret = lseek(ofd, sld_header_off, SEEK_SET); | |
572 | if (ret < 0) { | |
573 | fprintf(stderr, "lseek ofd fail for sld_img\n"); | |
574 | exit(EXIT_FAILURE); | |
575 | } | |
576 | ||
577 | /* Write image header */ | |
578 | if (!using_fit) { | |
579 | /* TODO */ | |
580 | } else { | |
581 | copy_file(ofd, sld_img, 0, sld_header_off, 0); | |
582 | sld_csf_off = | |
583 | generate_ivt_for_fit(ofd, sld_header_off, | |
584 | sld_start_addr, | |
585 | &sld_load_addr) + 0x20; | |
586 | } | |
587 | } | |
588 | ||
589 | if (!signed_hdmi) | |
590 | dump_header_v2(imx_header, 0); | |
591 | dump_header_v2(imx_header, 1); | |
592 | ||
593 | fprintf(stdout, "========= OFFSET dump ========="); | |
594 | if (signed_hdmi) { | |
595 | fprintf(stdout, "\nSIGNED HDMI FW:\n"); | |
596 | fprintf(stdout, " header_hdmi_off \t0x%x\n", | |
597 | header_hdmi_off); | |
598 | } | |
599 | ||
600 | fprintf(stdout, "\nLoader IMAGE:\n"); | |
601 | fprintf(stdout, " header_image_off \t0x%x\n image_off \t\t0x%x\n csf_off \t\t0x%x\n", | |
602 | header_image_off, image_off, csf_off); | |
603 | fprintf(stdout, " spl hab block: \t0x%x 0x%x 0x%x\n", | |
604 | imx_header[IMAGE_IVT_ID].fhdr.self, header_image_off, | |
605 | csf_off - header_image_off); | |
606 | ||
607 | fprintf(stdout, "\nSecond Loader IMAGE:\n"); | |
608 | fprintf(stdout, " sld_header_off \t0x%x\n", | |
609 | sld_header_off); | |
610 | fprintf(stdout, " sld_csf_off \t\t0x%x\n", | |
611 | sld_csf_off); | |
612 | fprintf(stdout, " sld hab block: \t0x%x 0x%x 0x%x\n", | |
613 | sld_load_addr, sld_header_off, sld_csf_off - sld_header_off); | |
614 | } | |
615 | ||
616 | int imx8mimage_copy_image(int outfd, struct image_tool_params *mparams) | |
617 | { | |
618 | /* | |
619 | * SECO FW is a container image, this is to calculate the | |
620 | * 2nd container offset. | |
621 | */ | |
622 | fprintf(stdout, "parsing %s\n", mparams->imagename); | |
623 | parse_cfg_file(mparams->imagename); | |
624 | ||
625 | build_image(outfd); | |
626 | ||
627 | return 0; | |
628 | } | |
629 | ||
630 | /* | |
631 | * imx8mimage parameters | |
632 | */ | |
633 | U_BOOT_IMAGE_TYPE( | |
634 | imx8mimage, | |
635 | "NXP i.MX8M Boot Image support", | |
636 | 0, | |
637 | NULL, | |
638 | imx8mimage_check_params, | |
639 | NULL, | |
640 | imx8mimage_print_header, | |
641 | imx8mimage_set_header, | |
642 | NULL, | |
643 | imx8mimage_check_image_types, | |
644 | NULL, | |
645 | NULL | |
646 | ); |