board: phytec: am62a7: Add PHYTEC phyCORE-AM62A7 SoM

[J-u-boot.git] / configs / turris_1x_nor_defconfig

CONFIG_PPC=y
CONFIG_TEXT_BASE=0xeff40000
CONFIG_SYS_MALLOC_F_LEN=0x1000
CONFIG_NR_DRAM_BANKS=5
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_SYS_MONITOR_LEN=786432
CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_ENV_ADDR=0xeff20000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_TURRIS_1X=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_L2_CACHE=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_AHCI=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_HAS_BOARD_SIZE_LIMIT=y
CONFIG_BOARD_SIZE_LIMIT=786432
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOOTDELAY=3
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run distro_bootcmd"
CONFIG_USE_PREBOOT=y
CONFIG_PCI_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_EEPROM is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_SYS_LOADS_BAUD_CHANGE=y
CONFIG_CMD_LSBLK=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_WDT=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_FS_UUID=y
CONFIG_OF_CONTROL=y
CONFIG_OF_INITIAL_DTB_READONLY=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth2"
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SCSI_AHCI=y
CONFIG_AHCI_PCI=y
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_DDR_CLK_FREQ=66666666
CONFIG_CHIP_SELECTS_PER_CTRL=2
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xef001001
CONFIG_SYS_OR0_PRELIM=0xff000ff7
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xff800821
CONFIG_SYS_OR1_PRELIM=0xfffc0796
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xffa00801
CONFIG_SYS_OR3_PRELIM=0xfffe09f7
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_MISC=y
CONFIG_ATSHA204A=y
# CONFIG_MMC_HW_PARTITIONING is not set
# CONFIG_MMC_VERBOSE is not set
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_CFI_FLASH=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=128
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_FSL_ELBC=y
CONFIG_NAND_FSL_ELBC_DT=y
CONFIG_MTD_UBI=y
CONFIG_PHY_FIXED=y
CONFIG_DM_MDIO=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
CONFIG_NVME_PCI=y
CONFIG_PCIE_FSL=y
CONFIG_SCSI=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_WDT=y
CONFIG_WDT_MAX6370=y
CONFIG_BCH=y
# CONFIG_BINMAN_FDT is not set