]>
Commit | Line | Data |
---|---|---|
07d538d2 MS |
1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | /* | |
3 | * (C) Copyright 2017 | |
4 | * Mario Six, Guntermann & Drunck GmbH, [email protected] | |
5 | */ | |
6 | ||
7 | #include <common.h> | |
8 | #include <clk-uclass.h> | |
d96c2604 | 9 | #include <clock_legacy.h> |
09140113 | 10 | #include <command.h> |
07d538d2 | 11 | #include <dm.h> |
f7ae49fc | 12 | #include <log.h> |
2189d5f1 | 13 | #include <vsprintf.h> |
07d538d2 MS |
14 | #include <dm/lists.h> |
15 | #include <dt-bindings/clk/mpc83xx-clk.h> | |
16 | #include <asm/arch/soc.h> | |
cd93d625 | 17 | #include <linux/bitops.h> |
07d538d2 MS |
18 | |
19 | #include "mpc83xx_clk.h" | |
20 | ||
21 | DECLARE_GLOBAL_DATA_PTR; | |
22 | ||
23 | /** | |
24 | * struct mpc83xx_clk_priv - Private data structure for the MPC83xx clock | |
25 | * driver | |
26 | * @speed: Array containing the speed values of all system clocks (initialized | |
27 | * once, then only read back) | |
28 | */ | |
29 | struct mpc83xx_clk_priv { | |
30 | u32 speed[MPC83XX_CLK_COUNT]; | |
31 | }; | |
32 | ||
33 | /** | |
34 | * is_clk_valid() - Check if clock ID is valid for given clock device | |
35 | * @clk: The clock device for which to check a clock ID | |
36 | * @id: The clock ID to check | |
37 | * | |
38 | * Return: true if clock ID is valid for clock device, false if not | |
39 | */ | |
40 | static inline bool is_clk_valid(struct udevice *clk, int id) | |
41 | { | |
42 | ulong type = dev_get_driver_data(clk); | |
43 | ||
44 | switch (id) { | |
45 | case MPC83XX_CLK_MEM: | |
46 | return true; | |
47 | case MPC83XX_CLK_MEM_SEC: | |
48 | return type == SOC_MPC8360; | |
49 | case MPC83XX_CLK_ENC: | |
50 | return (type == SOC_MPC8308) || (type == SOC_MPC8309); | |
51 | case MPC83XX_CLK_I2C1: | |
52 | return true; | |
53 | case MPC83XX_CLK_TDM: | |
54 | return type == SOC_MPC8315; | |
55 | case MPC83XX_CLK_SDHC: | |
56 | return mpc83xx_has_sdhc(type); | |
57 | case MPC83XX_CLK_TSEC1: | |
58 | case MPC83XX_CLK_TSEC2: | |
59 | return mpc83xx_has_tsec(type); | |
60 | case MPC83XX_CLK_USBDR: | |
61 | return type == SOC_MPC8360; | |
62 | case MPC83XX_CLK_USBMPH: | |
63 | return type == SOC_MPC8349; | |
64 | case MPC83XX_CLK_PCIEXP1: | |
65 | return mpc83xx_has_pcie1(type); | |
66 | case MPC83XX_CLK_PCIEXP2: | |
67 | return mpc83xx_has_pcie2(type); | |
68 | case MPC83XX_CLK_SATA: | |
69 | return mpc83xx_has_sata(type); | |
70 | case MPC83XX_CLK_DMAC: | |
71 | return (type == SOC_MPC8308) || (type == SOC_MPC8309); | |
72 | case MPC83XX_CLK_PCI: | |
fddf876a RV |
73 | /* |
74 | * FIXME: implement proper support for this. | |
75 | */ | |
76 | return 0 && mpc83xx_has_pci(type); | |
07d538d2 MS |
77 | case MPC83XX_CLK_CSB: |
78 | return true; | |
79 | case MPC83XX_CLK_I2C2: | |
80 | return mpc83xx_has_second_i2c(type); | |
81 | case MPC83XX_CLK_QE: | |
82 | case MPC83XX_CLK_BRG: | |
83 | return mpc83xx_has_quicc_engine(type) && (type != SOC_MPC8309); | |
84 | case MPC83XX_CLK_LCLK: | |
85 | case MPC83XX_CLK_LBIU: | |
86 | case MPC83XX_CLK_CORE: | |
87 | return true; | |
88 | } | |
89 | ||
90 | return false; | |
91 | } | |
92 | ||
93 | /** | |
94 | * init_single_clk() - Initialize a clock with a given ID | |
95 | * @dev: The clock device for which to initialize the clock | |
96 | * @clk: The clock ID | |
97 | * | |
98 | * The clock speed is read from the hardware's registers, and stored in the | |
99 | * private data structure of the driver. From there it is only retrieved, and | |
100 | * not set. | |
101 | * | |
102 | * Return: 0 if OK, -ve on error | |
103 | */ | |
104 | static int init_single_clk(struct udevice *dev, int clk) | |
105 | { | |
106 | struct mpc83xx_clk_priv *priv = dev_get_priv(dev); | |
107 | immap_t *im = (immap_t *)CONFIG_SYS_IMMR; | |
108 | ulong type = dev_get_driver_data(dev); | |
109 | struct clk_mode mode; | |
110 | ulong mask; | |
111 | u32 csb_clk = get_csb_clk(im); | |
112 | int ret; | |
113 | ||
114 | ret = retrieve_mode(clk, type, &mode); | |
115 | if (ret) { | |
116 | debug("%s: Could not retrieve mode for clk %d (ret = %d)\n", | |
117 | dev->name, clk, ret); | |
118 | return ret; | |
119 | } | |
120 | ||
121 | if (mode.type == TYPE_INVALID) { | |
122 | debug("%s: clock %d invalid\n", dev->name, clk); | |
123 | return -EINVAL; | |
124 | } | |
125 | ||
126 | if (mode.type == TYPE_SCCR_STANDARD) { | |
127 | mask = GENMASK(31 - mode.low, 31 - mode.high); | |
128 | ||
129 | switch (sccr_field(im, mask)) { | |
130 | case 0: | |
131 | priv->speed[clk] = 0; | |
132 | break; | |
133 | case 1: | |
134 | priv->speed[clk] = csb_clk; | |
135 | break; | |
136 | case 2: | |
137 | priv->speed[clk] = csb_clk / 2; | |
138 | break; | |
139 | case 3: | |
140 | priv->speed[clk] = csb_clk / 3; | |
141 | break; | |
142 | default: | |
143 | priv->speed[clk] = 0; | |
144 | } | |
145 | ||
146 | return 0; | |
147 | } | |
148 | ||
149 | if (mode.type == TYPE_SPMR_DIRECT_MULTIPLY) { | |
150 | mask = GENMASK(31 - mode.low, 31 - mode.high); | |
151 | ||
152 | priv->speed[clk] = csb_clk * (1 + sccr_field(im, mask)); | |
153 | return 0; | |
154 | } | |
155 | ||
156 | if (clk == MPC83XX_CLK_CSB || clk == MPC83XX_CLK_I2C2) { | |
157 | priv->speed[clk] = csb_clk; /* i2c-2 clk is equal to csb clk */ | |
158 | return 0; | |
159 | } | |
160 | ||
161 | if (clk == MPC83XX_CLK_QE || clk == MPC83XX_CLK_BRG) { | |
162 | u32 pci_sync_in = get_pci_sync_in(im); | |
163 | u32 qepmf = spmr_field(im, SPMR_CEPMF); | |
164 | u32 qepdf = spmr_field(im, SPMR_CEPDF); | |
165 | u32 qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); | |
166 | ||
167 | if (clk == MPC83XX_CLK_QE) | |
168 | priv->speed[clk] = qe_clk; | |
169 | else | |
170 | priv->speed[clk] = qe_clk / 2; | |
171 | ||
172 | return 0; | |
173 | } | |
174 | ||
175 | if (clk == MPC83XX_CLK_LCLK || clk == MPC83XX_CLK_LBIU) { | |
176 | u32 lbiu_clk = csb_clk * | |
177 | (1 + spmr_field(im, SPMR_LBIUCM)); | |
178 | u32 clkdiv = lcrr_field(im, LCRR_CLKDIV); | |
179 | ||
180 | if (clk == MPC83XX_CLK_LBIU) | |
181 | priv->speed[clk] = lbiu_clk; | |
182 | ||
183 | switch (clkdiv) { | |
184 | case 2: | |
185 | case 4: | |
186 | case 8: | |
187 | priv->speed[clk] = lbiu_clk / clkdiv; | |
188 | break; | |
189 | default: | |
190 | /* unknown lcrr */ | |
191 | priv->speed[clk] = 0; | |
192 | } | |
193 | ||
194 | return 0; | |
195 | } | |
196 | ||
197 | if (clk == MPC83XX_CLK_CORE) { | |
198 | u8 corepll = spmr_field(im, SPMR_COREPLL); | |
199 | u32 corecnf_tab_index = ((corepll & 0x1F) << 2) | | |
200 | ((corepll & 0x60) >> 5); | |
201 | ||
202 | if (corecnf_tab_index > (ARRAY_SIZE(corecnf_tab))) { | |
203 | debug("%s: Core configuration index %02x too high; possible wrong value", | |
204 | dev->name, corecnf_tab_index); | |
205 | return -EINVAL; | |
206 | } | |
207 | ||
208 | switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) { | |
209 | case RAT_BYP: | |
210 | case RAT_1_TO_1: | |
211 | priv->speed[clk] = csb_clk; | |
212 | break; | |
213 | case RAT_1_5_TO_1: | |
214 | priv->speed[clk] = (3 * csb_clk) / 2; | |
215 | break; | |
216 | case RAT_2_TO_1: | |
217 | priv->speed[clk] = 2 * csb_clk; | |
218 | break; | |
219 | case RAT_2_5_TO_1: | |
220 | priv->speed[clk] = (5 * csb_clk) / 2; | |
221 | break; | |
222 | case RAT_3_TO_1: | |
223 | priv->speed[clk] = 3 * csb_clk; | |
224 | break; | |
225 | default: | |
226 | /* unknown core to csb ratio */ | |
227 | priv->speed[clk] = 0; | |
228 | } | |
229 | ||
230 | return 0; | |
231 | } | |
232 | ||
233 | /* Unknown clk value -> error */ | |
234 | debug("%s: clock %d invalid\n", dev->name, clk); | |
235 | return -EINVAL; | |
236 | } | |
237 | ||
238 | /** | |
239 | * init_all_clks() - Initialize all clocks of a clock device | |
240 | * @dev: The clock device whose clocks should be initialized | |
241 | * | |
242 | * Return: 0 if OK, -ve on error | |
243 | */ | |
244 | static inline int init_all_clks(struct udevice *dev) | |
245 | { | |
246 | int i; | |
247 | ||
248 | for (i = 0; i < MPC83XX_CLK_COUNT; i++) { | |
249 | int ret; | |
250 | ||
251 | if (!is_clk_valid(dev, i)) | |
252 | continue; | |
253 | ||
254 | ret = init_single_clk(dev, i); | |
255 | if (ret) { | |
256 | debug("%s: Failed to initialize %s clock\n", | |
257 | dev->name, names[i]); | |
258 | return ret; | |
259 | } | |
260 | } | |
261 | ||
262 | return 0; | |
263 | } | |
264 | ||
265 | static int mpc83xx_clk_request(struct clk *clock) | |
266 | { | |
267 | /* Reject requests of clocks that are not available */ | |
268 | if (is_clk_valid(clock->dev, clock->id)) | |
269 | return 0; | |
270 | else | |
271 | return -ENODEV; | |
272 | } | |
273 | ||
274 | static ulong mpc83xx_clk_get_rate(struct clk *clk) | |
275 | { | |
276 | struct mpc83xx_clk_priv *priv = dev_get_priv(clk->dev); | |
277 | ||
278 | if (clk->id >= MPC83XX_CLK_COUNT) { | |
279 | debug("%s: clock index %lu invalid\n", __func__, clk->id); | |
280 | return 0; | |
281 | } | |
282 | ||
283 | return priv->speed[clk->id]; | |
284 | } | |
285 | ||
487bb2bc MS |
286 | static int mpc83xx_clk_enable(struct clk *clk) |
287 | { | |
288 | /* MPC83xx clocks are always enabled */ | |
289 | return 0; | |
290 | } | |
291 | ||
07d538d2 MS |
292 | int get_clocks(void) |
293 | { | |
294 | /* Empty implementation to keep the prototype in common.h happy */ | |
295 | return 0; | |
296 | } | |
297 | ||
298 | int get_serial_clock(void) | |
299 | { | |
300 | struct mpc83xx_clk_priv *priv; | |
301 | struct udevice *clk; | |
302 | int ret; | |
303 | ||
304 | ret = uclass_first_device_err(UCLASS_CLK, &clk); | |
305 | if (ret) { | |
306 | debug("%s: Could not get clock device\n", __func__); | |
307 | return ret; | |
308 | } | |
309 | ||
310 | priv = dev_get_priv(clk); | |
311 | ||
312 | return priv->speed[MPC83XX_CLK_CSB]; | |
313 | } | |
314 | ||
315 | const struct clk_ops mpc83xx_clk_ops = { | |
316 | .request = mpc83xx_clk_request, | |
317 | .get_rate = mpc83xx_clk_get_rate, | |
487bb2bc | 318 | .enable = mpc83xx_clk_enable, |
07d538d2 MS |
319 | }; |
320 | ||
321 | static const struct udevice_id mpc83xx_clk_match[] = { | |
322 | { .compatible = "fsl,mpc8308-clk", .data = SOC_MPC8308 }, | |
323 | { .compatible = "fsl,mpc8309-clk", .data = SOC_MPC8309 }, | |
324 | { .compatible = "fsl,mpc8313-clk", .data = SOC_MPC8313 }, | |
325 | { .compatible = "fsl,mpc8315-clk", .data = SOC_MPC8315 }, | |
326 | { .compatible = "fsl,mpc832x-clk", .data = SOC_MPC832X }, | |
327 | { .compatible = "fsl,mpc8349-clk", .data = SOC_MPC8349 }, | |
328 | { .compatible = "fsl,mpc8360-clk", .data = SOC_MPC8360 }, | |
329 | { .compatible = "fsl,mpc8379-clk", .data = SOC_MPC8379 }, | |
330 | { /* sentinel */ } | |
331 | }; | |
332 | ||
333 | static int mpc83xx_clk_probe(struct udevice *dev) | |
334 | { | |
335 | struct mpc83xx_clk_priv *priv = dev_get_priv(dev); | |
336 | ulong type; | |
337 | int ret; | |
338 | ||
339 | ret = init_all_clks(dev); | |
340 | if (ret) { | |
341 | debug("%s: Could not initialize all clocks (ret = %d)\n", | |
342 | dev->name, ret); | |
343 | return ret; | |
344 | } | |
345 | ||
346 | type = dev_get_driver_data(dev); | |
347 | ||
348 | if (mpc83xx_has_sdhc(type)) | |
349 | gd->arch.sdhc_clk = priv->speed[MPC83XX_CLK_SDHC]; | |
350 | ||
351 | gd->arch.core_clk = priv->speed[MPC83XX_CLK_CORE]; | |
352 | gd->arch.i2c1_clk = priv->speed[MPC83XX_CLK_I2C1]; | |
353 | if (mpc83xx_has_second_i2c(type)) | |
354 | gd->arch.i2c2_clk = priv->speed[MPC83XX_CLK_I2C2]; | |
355 | ||
356 | gd->mem_clk = priv->speed[MPC83XX_CLK_MEM]; | |
357 | ||
358 | if (mpc83xx_has_pci(type)) | |
359 | gd->pci_clk = priv->speed[MPC83XX_CLK_PCI]; | |
360 | ||
361 | gd->cpu_clk = priv->speed[MPC83XX_CLK_CORE]; | |
362 | gd->bus_clk = priv->speed[MPC83XX_CLK_CSB]; | |
363 | ||
364 | return 0; | |
365 | } | |
366 | ||
367 | static int mpc83xx_clk_bind(struct udevice *dev) | |
368 | { | |
369 | int ret; | |
370 | struct udevice *sys_child; | |
371 | ||
372 | /* | |
373 | * Since there is no corresponding device tree entry, and since the | |
374 | * clock driver has to be present in either case, bind the sysreset | |
375 | * driver here. | |
376 | */ | |
377 | ret = device_bind_driver(dev, "mpc83xx_sysreset", "sysreset", | |
378 | &sys_child); | |
379 | if (ret) | |
380 | debug("%s: No sysreset driver: ret=%d\n", | |
381 | dev->name, ret); | |
382 | ||
383 | return 0; | |
384 | } | |
385 | ||
386 | U_BOOT_DRIVER(mpc83xx_clk) = { | |
387 | .name = "mpc83xx_clk", | |
388 | .id = UCLASS_CLK, | |
389 | .of_match = mpc83xx_clk_match, | |
390 | .ops = &mpc83xx_clk_ops, | |
391 | .probe = mpc83xx_clk_probe, | |
392 | .priv_auto_alloc_size = sizeof(struct mpc83xx_clk_priv), | |
393 | .bind = mpc83xx_clk_bind, | |
394 | }; | |
395 | ||
09140113 SG |
396 | static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc, |
397 | char *const argv[]) | |
07d538d2 MS |
398 | { |
399 | int i; | |
400 | char buf[32]; | |
401 | struct udevice *clk; | |
402 | int ret; | |
403 | struct mpc83xx_clk_priv *priv; | |
404 | ||
405 | ret = uclass_first_device_err(UCLASS_CLK, &clk); | |
406 | if (ret) { | |
407 | debug("%s: Could not get clock device\n", __func__); | |
408 | return ret; | |
409 | } | |
410 | ||
411 | for (i = 0; i < MPC83XX_CLK_COUNT; i++) { | |
412 | if (!is_clk_valid(clk, i)) | |
413 | continue; | |
414 | ||
415 | priv = dev_get_priv(clk); | |
416 | ||
417 | printf("%s = %s MHz\n", names[i], strmhz(buf, priv->speed[i])); | |
418 | } | |
419 | ||
420 | return 0; | |
421 | } | |
422 | ||
423 | U_BOOT_CMD(clocks, 1, 1, do_clocks, | |
424 | "display values of SoC's clocks", | |
425 | "" | |
426 | ); |