[J-u-boot.git] / include / configs / advantech_dms-ba16.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016 Timesys Corporation
 * Copyright (C) 2016 Advantech Corporation
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 */

#ifndef __ADVANTECH_DMSBA16_CONFIG_H
#define __ADVANTECH_DMSBA16_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>

#define CONFIG_BOARD_NAME	"Advantech DMS-BA16"

#define CONFIG_MXC_UART_BASE	UART4_BASE
#define CONSOLE_DEV	"ttymxc3"
#define CONFIG_EXTRA_BOOTARGS	"panic=10"

#define CONFIG_BOOT_DIR	""
#define CONFIG_LOADCMD "fatload"
#define CONFIG_RFSPART "2"

#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_MXC_UART

/* SATA Configs */
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

#define CONFIG_USBD_HS

/* Networking Configs */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME		"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4

/* Serial Flash */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_LOADADDR	0x12000000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"loadcmd=" CONFIG_LOADCMD "\0" \
	"rfspart=" CONFIG_RFSPART "\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"update_sf_uboot=" \
		"if tftp $loadaddr $uboot; then " \
			"sf probe; " \
			"sf erase 0 0xC0000; " \
			"sf write $loadaddr 0x400 $filesize; " \
			"echo 'U-Boot upgraded. Please reset'; " \
		"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	"loadbootscript=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
		" source\0" \
	"loadimage=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run doboot; " \
			"fi; " \
		"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
		"run setargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${rfspart}; " \
	"run tryboot; " \
	\
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${rfspart}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"bmode usb; " \

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

/* Physical Memory Map */
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */

#define CONFIG_SYS_FSL_USDHC_NUM        3

/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_IMX6_PWM_PER_CLK         66000000

#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED            100000
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3

#endif	/* __ADVANTECH_DMSBA16_CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
ff383220 AB	2	/*
	3	* Copyright (C) 2016 Timesys Corporation
	4	* Copyright (C) 2016 Advantech Corporation
	5	* Copyright (C) 2012 Freescale Semiconductor, Inc.
ff383220 AB	6	*/
	7
	8	#ifndef __ADVANTECH_DMSBA16_CONFIG_H
	9	#define __ADVANTECH_DMSBA16_CONFIG_H
	10
	11	#include <asm/arch/imx-regs.h>
552a848e	12	#include <asm/mach-imx/gpio.h>
ff383220 AB	13
ff383220 AB	14	#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
ff383220 AB	15
ff383220 AB	16	#define CONFIG_MXC_UART_BASE UART4_BASE
12ca05a3	17	#define CONSOLE_DEV "ttymxc3"
ff383220 AB	18	#define CONFIG_EXTRA_BOOTARGS "panic=10"
	19
	20	#define CONFIG_BOOT_DIR ""
	21	#define CONFIG_LOADCMD "fatload"
	22	#define CONFIG_RFSPART "2"
	23
ff383220 AB	24	#include "mx6_common.h"
	25	#include <linux/sizes.h>
	26
ff383220 AB	27	#define CONFIG_CMDLINE_TAG
	28	#define CONFIG_SETUP_MEMORY_TAGS
	29	#define CONFIG_INITRD_TAG
	30	#define CONFIG_REVISION_TAG
	31	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	32
ff383220 AB	33	#define CONFIG_MXC_UART
ff383220 AB	34
ff383220	35	/* SATA Configs */
ff383220 AB	36	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	37	#define CONFIG_DWC_AHSATA_PORT_ID 0
	38	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	39	#define CONFIG_LBA48
ff383220 AB	40
ff383220 AB	41	/* MMC Configs */
ff383220	42	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
ff383220 AB	43
ff383220 AB	44	/* USB Configs */
ff383220 AB	45	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	46	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	47	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	48	#define CONFIG_MXC_USB_FLAGS 0
ff383220 AB	49
ff383220 AB	50	#define CONFIG_USBD_HS
ff383220 AB	51
	52	/* Networking Configs */
	53	#define CONFIG_FEC_MXC
ff383220 AB	54	#define IMX_FEC_BASE ENET_BASE_ADDR
	55	#define CONFIG_FEC_XCV_TYPE RGMII
	56	#define CONFIG_ETHPRIME "FEC"
	57	#define CONFIG_FEC_MXC_PHYADDR 4
ff383220 AB	58
ff383220 AB	59	/* Serial Flash */
ff383220 AB	60
	61	/* allow to overwrite serial and ethaddr */
	62	#define CONFIG_ENV_OVERWRITE
ff383220	63
ff383220	64	#define CONFIG_LOADADDR 0x12000000
ff383220 AB	65
	66	#define CONFIG_EXTRA_ENV_SETTINGS \
	67	"script=boot.scr\0" \
	68	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	69	"uboot=u-boot.imx\0" \
	70	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	71	"fdt_addr=0x18000000\0" \
	72	"boot_fdt=yes\0" \
	73	"ip_dyn=yes\0" \
12ca05a3	74	"console=" CONSOLE_DEV "\0" \
ff383220 AB	75	"fdt_high=0xffffffff\0" \
	76	"initrd_high=0xffffffff\0" \
	77	"sddev=0\0" \
	78	"emmcdev=1\0" \
	79	"partnum=1\0" \
	80	"loadcmd=" CONFIG_LOADCMD "\0" \
	81	"rfspart=" CONFIG_RFSPART "\0" \
	82	"update_sd_firmware=" \
	83	"if test ${ip_dyn} = yes; then " \
	84	"setenv get_cmd dhcp; " \
	85	"else " \
	86	"setenv get_cmd tftp; " \
	87	"fi; " \
	88	"if mmc dev ${mmcdev}; then " \
	89	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	90	"setexpr fw_sz ${filesize} / 0x200; " \
	91	"setexpr fw_sz ${fw_sz} + 1; " \
	92	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	93	"fi; " \
	94	"fi\0" \
	95	"update_sf_uboot=" \
	96	"if tftp $loadaddr $uboot; then " \
	97	"sf probe; " \
	98	"sf erase 0 0xC0000; " \
	99	"sf write $loadaddr 0x400 $filesize; " \
	100	"echo 'U-Boot upgraded. Please reset'; " \
	101	"fi\0" \
	102	"setargs=setenv bootargs console=${console},${baudrate} " \
	103	"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	104	"loadbootscript=" \
	105	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	106	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	107	" source\0" \
	108	"loadimage=" \
	109	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	110	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	111	"tryboot=" \
	112	"if run loadbootscript; then " \
	113	"run bootscript; " \
	114	"else " \
	115	"if run loadimage; then " \
	116	"run doboot; " \
	117	"fi; " \
	118	"fi;\0" \
	119	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	120	"run setargs; " \
	121	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	122	"if run loadfdt; then " \
	123	"bootm ${loadaddr} - ${fdt_addr}; " \
	124	"else " \
	125	"if test ${boot_fdt} = try; then " \
	126	"bootm; " \
	127	"else " \
	128	"echo WARN: Cannot load the DT; " \
	129	"fi; " \
	130	"fi; " \
	131	"else " \
	132	"bootm; " \
	133	"fi;\0" \
	134	"netargs=setenv bootargs console=${console},${baudrate} " \
	135	"root=/dev/nfs " \
	136	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	137	"netboot=echo Booting from net ...; " \
	138	"run netargs; " \
139	"if test ${ip_dyn} = yes; then " \
140	"setenv get_cmd dhcp; " \
141	"else " \
142	"setenv get_cmd tftp; " \
143	"fi; " \
144	"${get_cmd} ${image}; " \
145	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
146	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
147	"bootm ${loadaddr} - ${fdt_addr}; " \
148	"else " \
149	"if test ${boot_fdt} = try; then " \
150	"bootm; " \
151	"else " \
152	"echo WARN: Cannot load the DT; " \
153	"fi; " \
154	"fi; " \
155	"else " \
156	"bootm; " \
157	"fi;\0" \
158
159	#define CONFIG_BOOTCOMMAND \
160	"usb start; " \
161	"setenv dev usb; " \
162	"setenv devnum 0; " \
163	"setenv rootdev sda${rfspart}; " \
164	"run tryboot; " \
165	\
166	"setenv dev mmc; " \
167	"setenv rootdev mmcblk0p${rfspart}; " \
168	\
169	"setenv devnum ${sddev}; " \
170	"if mmc dev ${devnum}; then " \
171	"run tryboot; " \
172	"fi; " \
173	\
174	"setenv devnum ${emmcdev}; " \
175	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
176	"if mmc dev ${devnum}; then " \
177	"run tryboot; " \
178	"fi; " \
179	\
180	"bmode usb; " \
181
182	#define CONFIG_ARP_TIMEOUT 200UL
183
184	/* Miscellaneous configurable options */
ff383220	185
ff383220 AB	186	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
ff383220 AB	187
ff383220	188	/* Physical Memory Map */
ff383220 AB	189	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	190
	191	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	192	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	193	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	194
	195	#define CONFIG_SYS_INIT_SP_OFFSET \
	196	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	197	#define CONFIG_SYS_INIT_SP_ADDR \
	198	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	199
	200	/* FLASH and environment organization */
ff383220	201
ff383220 AB	202	#define CONFIG_SYS_FSL_USDHC_NUM 3
	203
	204	/* Framebuffer */
ff383220 AB	205	#define CONFIG_VIDEO_BMP_RLE8
	206	#define CONFIG_SPLASH_SCREEN
	207	#define CONFIG_SPLASH_SCREEN_ALIGN
	208	#define CONFIG_BMP_16BPP
	209	#define CONFIG_VIDEO_LOGO
	210	#define CONFIG_VIDEO_BMP_LOGO
ff383220 AB	211	#define CONFIG_IMX_HDMI
	212	#define CONFIG_IMX_VIDEO_SKIP
	213
ff383220 AB	214	#define CONFIG_IMX6_PWM_PER_CLK 66000000
ff383220 AB	215
ff383220	216	#ifdef CONFIG_CMD_PCI
ff383220 AB	217	#define CONFIG_PCI_SCAN_SHOW
	218	#define CONFIG_PCIE_IMX
	219	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	220	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	221	#endif
	222
	223	/* I2C Configs */
	224	#define CONFIG_SYS_I2C
	225	#define CONFIG_SYS_I2C_MXC
	226	#define CONFIG_SYS_I2C_SPEED 100000
	227	#define CONFIG_SYS_I2C_MXC_I2C1
	228	#define CONFIG_SYS_I2C_MXC_I2C2
	229	#define CONFIG_SYS_I2C_MXC_I2C3
	230
	231	#endif /* __ADVANTECH_DMSBA16_CONFIG_H */