[J-u-boot.git] / include / configs / mccmon6.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016-2017
 * Lukasz Majewski, DENX Software Engineering, [email protected]
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

#include "imx6_spl.h"

#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)

/*
 * Below defines are set but NOT really used since we by
 * design force U-Boot run when we boot in development
 * mode from SD card (SD2)
 */

#define CONFIG_MXC_UART_BASE		UART1_BASE

/* MMC Configuration */
#define CONFIG_SYS_FSL_USDHC_NUM	2
#define CONFIG_SYS_FSL_ESDHC_ADDR	0

/* NOR 16-bit mode */
#define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
#define CONFIG_FLASH_VERIFY

/* NOR Flash MTD */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ (CONFIG_SYS_FLASH_BASE) }
#define CONFIG_SYS_FLASH_BANKS_SIZES	{ (32 * SZ_1M) }

/* Ethernet Configuration */
#define CONFIG_FEC_MXC_PHYADDR		1

#define CONFIG_EXTRA_ENV_SETTINGS \
	"console=ttymxc0,115200 quiet\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"boot_os=yes\0" \
	"kernelsize=0x300000\0" \
	"disable_giga=yes\0" \
	"download_kernel=" \
		"tftpboot ${loadaddr} ${kernel_file};\0" \
	"get_boot_medium=" \
		"setenv boot_medium nor;" \
		"setexpr.l _src_sbmr1 *0x020d8004;" \
		"setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
		"if test ${_b_medium} = 40; then " \
			"setenv boot_medium sdcard;" \
		"fi\0" \
	"kernel_file=fitImage\0" \
	"boot_sd=" \
		"echo '#######################';" \
		"echo '# Factory SDcard Boot #';" \
		"echo '#######################';" \
		"setenv mmcdev 1;" \
		"setenv mmcfactorydev 0;" \
		"setenv mmcfactorypart 1;" \
		"run factory_flash_img;\0" \
	"boot_nor=" \
		"setenv kernelnor 0x08180000;" \
		"setenv bootargs console=${console} " \
		CONFIG_MTDPARTS_DEFAULT " " \
		"root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
		"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
		"bootm ${loadaddr};reset;\0" \
	"boot_recovery=" \
		"echo '#######################';" \
		"echo '# RECOVERY SWU Boot   #';" \
		"echo '#######################';" \
		"setenv rootfsloadaddr 0x13000000;" \
		"setenv swukernelnor 0x08980000;" \
		"setenv swurootfsnor 0x09180000;" \
		"setenv bootargs console=${console} " \
		CONFIG_MTDPARTS_DEFAULT " " \
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
		    ":${hostname}::off root=/dev/ram rw;" \
		"cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
		"cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
		"bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
	"boot_tftp=" \
		"echo '#######################';" \
		"echo '# TFTP Boot           #';" \
		"echo '#######################';" \
		"if run download_kernel; then " \
		     "setenv bootargs console=${console} " \
		     "root=/dev/mmcblk0p2 rootwait;" \
		     "bootm $loadaddr};reset;" \
		"fi\0" \
	"bootcmd=" \
		"if test -n ${recovery_status}; then " \
		     "run boot_recovery;" \
		"else " \
		     "if test ! -n ${boot_medium}; then " \
			  "run get_boot_medium;" \
			  "if test ${boot_medium} = sdcard; then " \
			      "run boot_sd;" \
			  "else " \
			      "run boot_nor;" \
			  "fi;" \
		     "else " \
			  "if test ${boot_medium} = tftp; then " \
			      "run boot_tftp;" \
			  "fi;" \
		     "fi;" \
		"fi\0" \
	"bootdev=1\0" \
	"bootpart=1\0" \
	"netdev=eth0\0" \
	"load_addr=0x11000000\0" \
	"uboot_file=u-boot.img\0" \
	"SPL_file=SPL\0" \
	"load_uboot=tftp ${load_addr} ${uboot_file}\0" \
	"nor_img_addr=0x11000000\0" \
	"nor_img_file=core-image-lwn-mccmon6.nor\0" \
	"emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
	"nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
	"nor_img_size=0x02000000\0" \
	"factory_script_file=factory.scr\0" \
	"factory_load_script=" \
		"if test -e mmc ${mmcdev}:${mmcfactorypart} " \
		    "${factory_script_file}; then " \
		    "load mmc ${mmcdev}:${mmcfactorypart} " \
		     "${loadaddr} ${factory_script_file};" \
		"fi\0" \
	"factory_script=echo Running factory script from mmc${mmcdev} ...; " \
		"source ${loadaddr}\0" \
	"factory_flash_img="\
		"echo 'Flash mccmon6 with factory images'; " \
		"if run factory_load_script; then " \
			"run factory_script;" \
		"else " \
		    "echo No factory script: ${factory_script_file} found on " \
		    "device ${mmcdev};" \
		    "run factory_nor_img;" \
		    "run factory_eMMC_img;" \
		    "run factory_SPL_falcon_setup;" \
		"fi\0" \
	"factory_eMMC_img="\
		"echo 'Update mccmon6 eMMC image'; " \
		"if load mmc ${mmcdev}:${mmcfactorypart} " \
		    "${loadaddr} ${emmc_img_file}; then " \
		    "setexpr fw_sz ${filesize} / 0x200;" \
		    "setexpr fw_sz ${fw_sz} + 1;" \
		    "mmc dev ${mmcfactorydev};" \
		    "mmc write ${loadaddr} 0x0 ${fw_sz};" \
		"fi\0" \
	"factory_nor_img="\
		"echo 'Update mccmon6 NOR image'; " \
		"if load mmc ${mmcdev}:${mmcfactorypart} " \
		    "${nor_img_addr} ${nor_img_file}; then " \
			"run nor_update;" \
		"fi\0" \
	"nor_update=" \
		    "protect off ${nor_bank_start} +${nor_img_size};" \
		    "erase ${nor_bank_start} +${nor_img_size};" \
		    "setexpr nor_img_size ${nor_img_size} / 4; " \
		    "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
	"factory_SPL_falcon_setup="\
		"echo 'Write Falcon boot data'; " \
		"setenv kernelnor 0x08180000;" \
		"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
		"spl export fdt ${loadaddr};" \
		"setenv nor_img_addr ${fdtargsaddr};" \
		"setenv nor_img_size 0x20000;" \
		"setenv nor_bank_start " \
				__stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
		"run nor_update\0" \
	"tftp_nor_uboot="\
		"echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
		"setenv nor_img_file u-boot.img; " \
		"setenv nor_img_size 0x80000; " \
		"setenv nor_bank_start 0x08080000; " \
		"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
		    "run nor_update;" \
		"fi\0" \
	"tftp_nor_fitImg="\
		"echo 'Update mccmon6 NOR fitImage via TFTP'; " \
		"setenv nor_img_file fitImage; " \
		"setenv nor_img_size 0x500000; " \
		"setenv nor_bank_start 0x08180000; " \
		"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
		    "run nor_update;" \
		"fi\0" \
	"tftp_nor_img="\
		"echo 'Update mccmon6 NOR image via TFTP'; " \
		"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
		    "run nor_update;" \
		"fi\0" \
	"tftp_nor_SPL="\
		"if tftp ${load_addr} SPL_padded; then " \
		    "erase 0x08000000 +0x20000;" \
		    "cp.b ${load_addr} 0x08000000 0x20000;" \
		"fi;\0" \
	"tftp_sd_SPL="\
	    "if mmc dev 1; then "      \
		"if tftp ${load_addr} ${SPL_file}; then " \
		    "setexpr fw_sz ${filesize} / 0x200; " \
		    "setexpr fw_sz ${fw_sz} + 1; " \
		    "mmc write ${load_addr} 0x2 ${fw_sz};" \
		"fi;" \
	    "fi;\0" \
	"tftp_sd_uboot="\
	    "if mmc dev 1; then "      \
		"if run load_uboot; then " \
		    "setexpr fw_sz ${filesize} / 0x200; " \
		    "setexpr fw_sz ${fw_sz} + 1; " \
		    "mmc write ${load_addr} 0x8A ${fw_sz};" \
		"fi;" \
	    "fi;\0"

/* Physical Memory Map */
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

/* Environment organization */

/* Envs are stored in NOR flash */

#endif			       /* __CONFIG_H * */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
11bd5e7b LM	2	/*
	3	* Copyright (C) 2016-2017
	4	* Lukasz Majewski, DENX Software Engineering, [email protected]
11bd5e7b LM	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
11bd5e7b LM	10	#include "mx6_common.h"
11bd5e7b LM	11
11bd5e7b LM	12	#include "imx6_spl.h"
11bd5e7b LM	13
11bd5e7b	14	#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
11bd5e7b LM	15
	16	/*
	17	* Below defines are set but NOT really used since we by
	18	* design force U-Boot run when we boot in development
	19	* mode from SD card (SD2)
	20	*/
11bd5e7b	21
11bd5e7b LM	22	#define CONFIG_MXC_UART_BASE UART1_BASE
11bd5e7b LM	23
11bd5e7b LM	24	/* MMC Configuration */
	25	#define CONFIG_SYS_FSL_USDHC_NUM 2
	26	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	27
11bd5e7b LM	28	/* NOR 16-bit mode */
11bd5e7b LM	29	#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR
11bd5e7b LM	30	#define CONFIG_FLASH_VERIFY
	31
	32	/* NOR Flash MTD */
11bd5e7b LM	33	#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
	34	#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) }
	35
11bd5e7b	36	/* Ethernet Configuration */
11bd5e7b	37	#define CONFIG_FEC_MXC_PHYADDR 1
11bd5e7b	38
11bd5e7b	39	#define CONFIG_EXTRA_ENV_SETTINGS \
cb11a28a	40	"console=ttymxc0,115200 quiet\0" \
11bd5e7b LM	41	"fdt_high=0xffffffff\0" \
	42	"initrd_high=0xffffffff\0" \
	43	"boot_os=yes\0" \
e4417ed0	44	"kernelsize=0x300000\0" \
917964cb	45	"disable_giga=yes\0" \
11bd5e7b	46	"download_kernel=" \
e4417ed0	47	"tftpboot ${loadaddr} ${kernel_file};\0" \
11bd5e7b LM	48	"get_boot_medium=" \
	49	"setenv boot_medium nor;" \
	50	"setexpr.l _src_sbmr1 *0x020d8004;" \
	51	"setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
	52	"if test ${_b_medium} = 40; then " \
	53	"setenv boot_medium sdcard;" \
	54	"fi\0" \
e4417ed0	55	"kernel_file=fitImage\0" \
11bd5e7b LM	56	"boot_sd=" \
	57	"echo '#######################';" \
	58	"echo '# Factory SDcard Boot #';" \
	59	"echo '#######################';" \
	60	"setenv mmcdev 1;" \
	61	"setenv mmcfactorydev 0;" \
	62	"setenv mmcfactorypart 1;" \
	63	"run factory_flash_img;\0" \
	64	"boot_nor=" \
	65	"setenv kernelnor 0x08180000;" \
cb11a28a	66	"setenv bootargs console=${console} " \
43ede0bc	67	CONFIG_MTDPARTS_DEFAULT " " \
11bd5e7b	68	"root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
e4417ed0 LM	69	"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
e4417ed0 LM	70	"bootm ${loadaddr};reset;\0" \
11bd5e7b LM	71	"boot_recovery=" \
	72	"echo '#######################';" \
	73	"echo '# RECOVERY SWU Boot #';" \
	74	"echo '#######################';" \
	75	"setenv rootfsloadaddr 0x13000000;" \
	76	"setenv swukernelnor 0x08980000;" \
	77	"setenv swurootfsnor 0x09180000;" \
11bd5e7b	78	"setenv bootargs console=${console} " \
43ede0bc	79	CONFIG_MTDPARTS_DEFAULT " " \
11bd5e7b LM	80	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	81	":${hostname}::off root=/dev/ram rw;" \
	82	"cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
e4417ed0 LM	83	"cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
e4417ed0 LM	84	"bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
11bd5e7b LM	85	"boot_tftp=" \
	86	"echo '#######################';" \
	87	"echo '# TFTP Boot #';" \
	88	"echo '#######################';" \
	89	"if run download_kernel; then " \
	90	"setenv bootargs console=${console} " \
	91	"root=/dev/mmcblk0p2 rootwait;" \
e4417ed0	92	"bootm $loadaddr};reset;" \
11bd5e7b LM	93	"fi\0" \
	94	"bootcmd=" \
	95	"if test -n ${recovery_status}; then " \
	96	"run boot_recovery;" \
	97	"else " \
	98	"if test ! -n ${boot_medium}; then " \
	99	"run get_boot_medium;" \
	100	"if test ${boot_medium} = sdcard; then " \
	101	"run boot_sd;" \
	102	"else " \
	103	"run boot_nor;" \
	104	"fi;" \
	105	"else " \
	106	"if test ${boot_medium} = tftp; then " \
	107	"run boot_tftp;" \
	108	"fi;" \
	109	"fi;" \
	110	"fi\0" \
11bd5e7b LM	111	"bootdev=1\0" \
11bd5e7b LM	112	"bootpart=1\0" \
11bd5e7b LM	113	"netdev=eth0\0" \
11bd5e7b LM	114	"load_addr=0x11000000\0" \
11bd5e7b LM	115	"uboot_file=u-boot.img\0" \
	116	"SPL_file=SPL\0" \
	117	"load_uboot=tftp ${load_addr} ${uboot_file}\0" \
	118	"nor_img_addr=0x11000000\0" \
	119	"nor_img_file=core-image-lwn-mccmon6.nor\0" \
	120	"emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
	121	"nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
	122	"nor_img_size=0x02000000\0" \
	123	"factory_script_file=factory.scr\0" \
	124	"factory_load_script=" \
	125	"if test -e mmc ${mmcdev}:${mmcfactorypart} " \
	126	"${factory_script_file}; then " \
	127	"load mmc ${mmcdev}:${mmcfactorypart} " \
	128	"${loadaddr} ${factory_script_file};" \
	129	"fi\0" \
	130	"factory_script=echo Running factory script from mmc${mmcdev} ...; " \
	131	"source ${loadaddr}\0" \
	132	"factory_flash_img="\
	133	"echo 'Flash mccmon6 with factory images'; " \
	134	"if run factory_load_script; then " \
	135	"run factory_script;" \
	136	"else " \
	137	"echo No factory script: ${factory_script_file} found on " \
	138	"device ${mmcdev};" \
	139	"run factory_nor_img;" \
	140	"run factory_eMMC_img;" \
e4417ed0	141	"run factory_SPL_falcon_setup;" \
11bd5e7b LM	142	"fi\0" \
	143	"factory_eMMC_img="\
	144	"echo 'Update mccmon6 eMMC image'; " \
	145	"if load mmc ${mmcdev}:${mmcfactorypart} " \
	146	"${loadaddr} ${emmc_img_file}; then " \
	147	"setexpr fw_sz ${filesize} / 0x200;" \
	148	"setexpr fw_sz ${fw_sz} + 1;" \
	149	"mmc dev ${mmcfactorydev};" \
	150	"mmc write ${loadaddr} 0x0 ${fw_sz};" \
	151	"fi\0" \
	152	"factory_nor_img="\
	153	"echo 'Update mccmon6 NOR image'; " \
	154	"if load mmc ${mmcdev}:${mmcfactorypart} " \
	155	"${nor_img_addr} ${nor_img_file}; then " \
	156	"run nor_update;" \
	157	"fi\0" \
	158	"nor_update=" \
	159	"protect off ${nor_bank_start} +${nor_img_size};" \
	160	"erase ${nor_bank_start} +${nor_img_size};" \
	161	"setexpr nor_img_size ${nor_img_size} / 4; " \
	162	"cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
e4417ed0 LM	163	"factory_SPL_falcon_setup="\
	164	"echo 'Write Falcon boot data'; " \
	165	"setenv kernelnor 0x08180000;" \
	166	"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
	167	"spl export fdt ${loadaddr};" \
	168	"setenv nor_img_addr ${fdtargsaddr};" \
	169	"setenv nor_img_size 0x20000;" \
	170	"setenv nor_bank_start " \
	171	__stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
	172	"run nor_update\0" \
11bd5e7b LM	173	"tftp_nor_uboot="\
	174	"echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
	175	"setenv nor_img_file u-boot.img; " \
	176	"setenv nor_img_size 0x80000; " \
	177	"setenv nor_bank_start 0x08080000; " \
	178	"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
	179	"run nor_update;" \
	180	"fi\0" \
e4417ed0 LM	181	"tftp_nor_fitImg="\
	182	"echo 'Update mccmon6 NOR fitImage via TFTP'; " \
	183	"setenv nor_img_file fitImage; " \
11bd5e7b LM	184	"setenv nor_img_size 0x500000; " \
	185	"setenv nor_bank_start 0x08180000; " \
	186	"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
	187	"run nor_update;" \
	188	"fi\0" \
	189	"tftp_nor_img="\
	190	"echo 'Update mccmon6 NOR image via TFTP'; " \
	191	"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
	192	"run nor_update;" \
	193	"fi\0" \
	194	"tftp_nor_SPL="\
	195	"if tftp ${load_addr} SPL_padded; then " \
	196	"erase 0x08000000 +0x20000;" \
	197	"cp.b ${load_addr} 0x08000000 0x20000;" \
	198	"fi;\0" \
	199	"tftp_sd_SPL="\
	200	"if mmc dev 1; then " \
	201	"if tftp ${load_addr} ${SPL_file}; then " \
	202	"setexpr fw_sz ${filesize} / 0x200; " \
	203	"setexpr fw_sz ${fw_sz} + 1; " \
	204	"mmc write ${load_addr} 0x2 ${fw_sz};" \
	205	"fi;" \
	206	"fi;\0" \
	207	"tftp_sd_uboot="\
	208	"if mmc dev 1; then " \
	209	"if run load_uboot; then " \
	210	"setexpr fw_sz ${filesize} / 0x200; " \
	211	"setexpr fw_sz ${fw_sz} + 1; " \
	212	"mmc write ${load_addr} 0x8A ${fw_sz};" \
	213	"fi;" \
	214	"fi;\0"
	215
	216	/* Physical Memory Map */
11bd5e7b LM	217	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	218
	219	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	220	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	221	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	222
11bd5e7b	223	/* Environment organization */
11bd5e7b LM	224
11bd5e7b LM	225	/* Envs are stored in NOR flash */
11bd5e7b LM	226
11bd5e7b LM	227	#endif /* __CONFIG_H * */