[J-u-boot.git] / doc / README.plan9

Plan 9 from Bell Labs kernel images require additional setup to pass
configuration information to the kernel.  An environment variable named
confaddr must be defined with the same value as CONFADDR (see mem.h).
Use of this facility is optional, but should be preferable to manual
configuration.

When booting an image, arguments supplied to the bootm command will be
copied to CONFADDR.  If no arguments are specified, the contents of the
bootargs environment variable will be copied.

If no command line arguments or bootargs are defined, CONFADDR is left
uninitialized to permit manual configuration.  For example, PC-style
configuration could be simulated by issuing a fatload in bootcmd:

  # setenv bootcmd fatload mmc 0 $confaddr plan9.ini; ...; bootm

Steven Stallion
June 2013
Commit	Line	Data
eeaef5e4 SS	1	Plan 9 from Bell Labs kernel images require additional setup to pass
	2	configuration information to the kernel. An environment variable named
	3	confaddr must be defined with the same value as CONFADDR (see mem.h).
	4	Use of this facility is optional, but should be preferable to manual
	5	configuration.
	6
	7	When booting an image, arguments supplied to the bootm command will be
	8	copied to CONFADDR. If no arguments are specified, the contents of the
	9	bootargs environment variable will be copied.
	10
	11	If no command line arguments or bootargs are defined, CONFADDR is left
	12	uninitialized to permit manual configuration. For example, PC-style
	13	configuration could be simulated by issuing a fatload in bootcmd:
	14
	15	# setenv bootcmd fatload mmc 0 $confaddr plan9.ini; ...; bootm
	16
	17	Steven Stallion
	18	June 2013