[J-u-boot.git] / include / configs / udoo_neo.h

/*
 * Copyright 2014-2015 Freescale Semiconductor, Inc.
 * Copyright Jasbir Matharu
 * Copyright 2015 UDOO Team
 *
 * Configuration settings for the UDOO NEO board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <config_distro_defaults.h>
#include "mx6_common.h"

#include "imx6_spl.h"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
#define CONFIG_MXC_UART

/* MMC Configuration */
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR

/* Command definition */
#define CONFIG_MXC_UART_BASE		UART1_BASE
#define CONFIG_SYS_MMC_ENV_DEV		0  /*USDHC2*/

/* Linux only */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdtfile=undefined\0" \
	"fdt_addr=0x83000000\0" \
	"ip_dyn=yes\0" \
	"mmcdev=0\0" \
	"mmcrootfstype=ext4\0" \
	"findfdt="\
		"if test $board_name = BASIC; then " \
			"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
		"if test $board_name = BASICKS; then " \
			"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
		"if test $board_name = FULL; then " \
			"setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
		"if test $board_name = EXTENDED; then " \
			"setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
		"if test $fdtfile = UNDEFINED; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"ramdisk_addr_r=0x83000000\0" \
	"ramdiskaddr=0x83000000\0" \
	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
	BOOTENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(DHCP, dhcp, na)

#define CONFIG_BOOTCOMMAND \
	"run findfdt; " \
	"run distro_bootcmd"

#include <config_distro_bootcmd.h>

/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)
#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_IS_IN_MMC

#define CONFIG_IMX_THERMAL

/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_SPEED		100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
#define PFUZE3000_I2C_BUS	0

/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII

#define CONFIG_FEC_ENET_DEV 0
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR          0x0

#define CONFIG_FEC_XCV_TYPE             RMII
#define CONFIG_ETHPRIME                 "FEC0"

#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#endif				/* __CONFIG_H */
Commit	Line	Data
792f1868 BL	1	/*
	2	* Copyright 2014-2015 Freescale Semiconductor, Inc.
	3	* Copyright Jasbir Matharu
	4	* Copyright 2015 UDOO Team
	5	*
	6	* Configuration settings for the UDOO NEO board.
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	#include <config_distro_defaults.h>
	15	#include "mx6_common.h"
	16
	17	#include "imx6_spl.h"
	18
	19	/* Size of malloc() pool */
	20	#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
792f1868 BL	21	#define CONFIG_MXC_UART
	22
	23	/* MMC Configuration */
	24	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
	25
	26	/* Command definition */
	27	#define CONFIG_MXC_UART_BASE UART1_BASE
792f1868 BL	28	#define CONFIG_SYS_MMC_ENV_DEV 0 /USDHC2/
	29
	30	/* Linux only */
	31	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	32	#define CONFIG_EXTRA_ENV_SETTINGS \
792f1868 BL	33	"fdt_high=0xffffffff\0" \
792f1868 BL	34	"initrd_high=0xffffffff\0" \
5d3a28ab	35	"fdtfile=undefined\0" \
792f1868 BL	36	"fdt_addr=0x83000000\0" \
	37	"ip_dyn=yes\0" \
	38	"mmcdev=0\0" \
	39	"mmcrootfstype=ext4\0" \
792f1868 BL	40	"findfdt="\
792f1868 BL	41	"if test $board_name = BASIC; then " \
5d3a28ab	42	"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
792f1868	43	"if test $board_name = BASICKS; then " \
5d3a28ab	44	"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
792f1868	45	"if test $board_name = FULL; then " \
5d3a28ab	46	"setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
792f1868	47	"if test $board_name = EXTENDED; then " \
5d3a28ab FE	48	"setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
5d3a28ab FE	49	"if test $fdtfile = UNDEFINED; then " \
792f1868 BL	50	"echo WARNING: Could not determine dtb to use; fi; \0" \
	51	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	52	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	53	"ramdisk_addr_r=0x83000000\0" \
	54	"ramdiskaddr=0x83000000\0" \
	55	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
	56	BOOTENV
	57
	58	#define BOOT_TARGET_DEVICES(func) \
a11e30f8 BL	59	func(MMC, mmc, 0) \
a11e30f8 BL	60	func(DHCP, dhcp, na)
792f1868 BL	61
	62	#define CONFIG_BOOTCOMMAND \
	63	"run findfdt; " \
	64	"run distro_bootcmd"
	65
	66	#include <config_distro_bootcmd.h>
	67
	68	/* Miscellaneous configurable options */
	69	#define CONFIG_SYS_MEMTEST_START 0x80000000
	70	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
	71	#define CONFIG_STACKSIZE SZ_128K
	72
	73	/* Physical Memory Map */
	74	#define CONFIG_NR_DRAM_BANKS 1
	75	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	76	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	77	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	78	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	79
	80	#define CONFIG_SYS_INIT_SP_OFFSET \
	81	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	82	#define CONFIG_SYS_INIT_SP_ADDR \
	83	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	84
	85	/* Environment organization */
	86	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	87	#define CONFIG_ENV_SIZE SZ_8K
	88	#define CONFIG_ENV_IS_IN_MMC
	89
0719b16f BL	90	#define CONFIG_IMX_THERMAL
0719b16f BL	91
21729bcd BL	92	/* I2C configs */
	93	#define CONFIG_SYS_I2C
	94	#define CONFIG_SYS_I2C_MXC
	95	#define CONFIG_SYS_I2C_MXC_I2C1
	96	#define CONFIG_SYS_I2C_SPEED 100000
	97
	98	/* PMIC */
	99	#define CONFIG_POWER
	100	#define CONFIG_POWER_I2C
	101	#define CONFIG_POWER_PFUZE3000
	102	#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
	103	#define PFUZE3000_I2C_BUS 0
	104
a11e30f8 BL	105	/* Network */
	106	#define CONFIG_FEC_MXC
	107	#define CONFIG_MII
	108
	109	#define CONFIG_FEC_ENET_DEV 0
	110	#define IMX_FEC_BASE ENET_BASE_ADDR
	111	#define CONFIG_FEC_MXC_PHYADDR 0x0
	112
	113	#define CONFIG_FEC_XCV_TYPE RMII
	114	#define CONFIG_ETHPRIME "FEC0"
	115
	116	#define CONFIG_PHYLIB
	117	#define CONFIG_PHY_MICREL
	118
792f1868	119	#endif /* __CONFIG_H */