[J-u-boot.git] / include / ubispl.h

/* SPDX-License-Identifier: GPL 2.0+ OR BSD-3-Clause */
/*
 * Copyright (c) Thomas Gleixner <[email protected]>
 */
#ifndef __UBOOT_UBISPL_H
#define __UBOOT_UBISPL_H

#define UBI_VOL_NAME_MAX	127

/*
 * The following CONFIG options are relevant for UBISPL
 *
 * #define CONFIG_SPL_UBI_MAX_VOL_LEBS		256
 *
 * Defines the maximum number of logical erase blocks per loadable
 * (static) volume to size the ubispl internal arrays.
 *
 * #define CONFIG_SPL_UBI_MAX_PEB_SIZE		(256*1024)
 *
 * Defines the maximum physical erase block size to size the fastmap
 * buffer for ubispl.
 *
 * #define CONFIG_SPL_UBI_MAX_PEBS		4096
 *
 * Define the maximum number of physical erase blocks to size the
 * ubispl internal arrays.
 *
 * #define CONFIG_SPL_UBI_VOL_IDS		8
 *
 * Defines the maximum number of volumes in which UBISPL is
 * interested. Limits the amount of memory for the scan data and
 * speeds up the scan process as we simply ignore stuff which we dont
 * want to load from the SPL anyway. So the volumes which can be
 * loaded in the above example are ids 0 - 7
 */

/*
 * The struct definition is in drivers/mtd/ubispl/ubispl.h. It does
 * not fit into the BSS due to the large buffer requirement of the
 * upstream fastmap code. So the caller of ubispl_load_volumes needs
 * to hand in a pointer to a free memory area where ubispl will place
 * its data. The area is not required to be initialized.
 */
struct ubi_scan_info;

typedef int (*ubispl_read_flash)(int pnum, int offset, int len, void *dst);

/**
 * struct ubispl_info - description structure for fast ubi scan
 * @ubi:		Pointer to memory space for ubi scan info structure
 * @peb_size:		Physical erase block size
 * @vid_offset:		Offset of the VID header
 * @leb_start:		Start of the logical erase block, i.e. offset of data
 * @peb_count:		Number of physical erase blocks in the UBI FLASH area
 *			aka MTD partition.
 * @peb_offset:		Offset of PEB0 in the UBI FLASH area (aka MTD partition)
 *			to the real start of the FLASH in erase blocks.
 * @fastmap:		Enable fastmap attachment
 * @read:		Read function to access the flash
 */
struct ubispl_info {
	struct ubi_scan_info	*ubi;
	u32			peb_size;
	u32			vid_offset;
	u32			leb_start;
	u32			peb_count;
	u32			peb_offset;
	int			fastmap;
	ubispl_read_flash	read;
};

/**
 * struct ubispl_load - structure to describe a volume to load
 * @vol_id:	Volume id
 * @load_addr:	Load address of the volume
 */
struct ubispl_load {
	int		vol_id;
#ifdef CONFIG_SPL_UBI_LOAD_BY_VOLNAME
	u32		name_len;
	char		name[UBI_VOL_NAME_MAX + 1];
#endif
	void		*load_addr;
};

/**
 * ubispl_load_volumes - Scan flash and load volumes
 * @info:	Pointer to the ubi scan info structure
 * @lovls:	Pointer to array of volumes to load
 * @nrvols:	Array size of @lovls
 */
int ubispl_load_volumes(struct ubispl_info *info,
			struct ubispl_load *lvols, int nrvols);

#endif
Commit	Line	Data
4549e789	1	/* SPDX-License-Identifier: GPL 2.0+ OR BSD-3-Clause */
6f4e7d3c TG	2	/*
6f4e7d3c TG	3	* Copyright (c) Thomas Gleixner <[email protected]>
6f4e7d3c TG	4	*/
	5	#ifndef __UBOOT_UBISPL_H
	6	#define __UBOOT_UBISPL_H
	7
6ea31cce HG	8	#define UBI_VOL_NAME_MAX 127
6ea31cce HG	9
6f4e7d3c TG	10	/*
	11	* The following CONFIG options are relevant for UBISPL
	12	*
	13	* #define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
	14	*
	15	* Defines the maximum number of logical erase blocks per loadable
	16	* (static) volume to size the ubispl internal arrays.
	17	*
	18	* #define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
	19	*
	20	* Defines the maximum physical erase block size to size the fastmap
	21	* buffer for ubispl.
	22	*
	23	* #define CONFIG_SPL_UBI_MAX_PEBS 4096
	24	*
	25	* Define the maximum number of physical erase blocks to size the
	26	* ubispl internal arrays.
	27	*
	28	* #define CONFIG_SPL_UBI_VOL_IDS 8
	29	*
	30	* Defines the maximum number of volumes in which UBISPL is
	31	* interested. Limits the amount of memory for the scan data and
	32	* speeds up the scan process as we simply ignore stuff which we dont
	33	* want to load from the SPL anyway. So the volumes which can be
	34	* loaded in the above example are ids 0 - 7
	35	*/
	36
	37	/*
	38	* The struct definition is in drivers/mtd/ubispl/ubispl.h. It does
	39	* not fit into the BSS due to the large buffer requirement of the
	40	* upstream fastmap code. So the caller of ubispl_load_volumes needs
	41	* to hand in a pointer to a free memory area where ubispl will place
	42	* its data. The area is not required to be initialized.
	43	*/
	44	struct ubi_scan_info;
	45
	46	typedef int (ubispl_read_flash)(int pnum, int offset, int len, void dst);
	47
	48	/**
	49	* struct ubispl_info - description structure for fast ubi scan
	50	* @ubi: Pointer to memory space for ubi scan info structure
	51	* @peb_size: Physical erase block size
	52	* @vid_offset: Offset of the VID header
	53	* @leb_start: Start of the logical erase block, i.e. offset of data
	54	* @peb_count: Number of physical erase blocks in the UBI FLASH area
	55	* aka MTD partition.
	56	* @peb_offset: Offset of PEB0 in the UBI FLASH area (aka MTD partition)
	57	* to the real start of the FLASH in erase blocks.
	58	* @fastmap: Enable fastmap attachment
	59	* @read: Read function to access the flash
	60	*/
	61	struct ubispl_info {
	62	struct ubi_scan_info *ubi;
	63	u32 peb_size;
	64	u32 vid_offset;
	65	u32 leb_start;
	66	u32 peb_count;
	67	u32 peb_offset;
	68	int fastmap;
	69	ubispl_read_flash read;
	70	};
	71
	72	/**
	73	* struct ubispl_load - structure to describe a volume to load
74	* @vol_id: Volume id
75	* @load_addr: Load address of the volume
76	*/
77	struct ubispl_load {
78	int vol_id;
6ea31cce HG	79	#ifdef CONFIG_SPL_UBI_LOAD_BY_VOLNAME
	80	u32 name_len;
	81	char name[UBI_VOL_NAME_MAX + 1];
	82	#endif
6f4e7d3c TG	83	void *load_addr;
	84	};
	85
	86	/**
	87	* ubispl_load_volumes - Scan flash and load volumes
	88	* @info: Pointer to the ubi scan info structure
	89	* @lovls: Pointer to array of volumes to load
	90	* @nrvols: Array size of @lovls
	91	*/
	92	int ubispl_load_volumes(struct ubispl_info *info,
	93	struct ubispl_load *lvols, int nrvols);
	94
	95	#endif