[J-u-boot.git] / include / configs / mx6sllevk.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2013-2016 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6SL EVK board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)

#define CONFIG_MXC_UART_BASE		UART1_BASE

/* I2C Configs */
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#endif

#define CONFIG_EXTRA_ENV_SETTINGS \
	"epdc_waveform=epdc_splash.bin\0" \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6sll-evk.dtb\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"usb start; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */

/* Physical Memory Map */
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE			SZ_2G

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
#define CONFIG_SYS_FSL_USDHC_NUM	3

#define CONFIG_IOMUX_LPSR

/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#endif

#include <linux/stringify.h>
#endif				/* __CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
47f73504 PF	2	/*
	3	* Copyright 2013-2016 Freescale Semiconductor, Inc.
	4	*
	5	* Configuration settings for the Freescale i.MX6SL EVK board.
47f73504 PF	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	#include "mx6_common.h"
	12
47f73504 PF	13	/* Size of malloc() pool */
	14	#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
	15
47f73504 PF	16	#define CONFIG_MXC_UART_BASE UART1_BASE
	17
	18	/* I2C Configs */
	19	#ifdef CONFIG_CMD_I2C
	20	#define CONFIG_SYS_I2C_MXC
	21	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	22	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	23	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
47f73504 PF	24	#endif
	25
	26	#define CONFIG_EXTRA_ENV_SETTINGS \
	27	"epdc_waveform=epdc_splash.bin\0" \
	28	"script=boot.scr\0" \
	29	"image=zImage\0" \
	30	"console=ttymxc0\0" \
	31	"fdt_high=0xffffffff\0" \
	32	"initrd_high=0xffffffff\0" \
	33	"fdt_file=imx6sll-evk.dtb\0" \
	34	"fdt_addr=0x83000000\0" \
	35	"boot_fdt=try\0" \
	36	"ip_dyn=yes\0" \
	37	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	38	"mmcpart=1\0" \
	39	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	40	"mmcautodetect=yes\0" \
	41	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	42	"root=${mmcroot}\0" \
	43	"loadbootscript=" \
	44	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	45	"bootscript=echo Running bootscript from mmc ...; " \
	46	"source\0" \
	47	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	48	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	49	"mmcboot=echo Booting from mmc ...; " \
	50	"run mmcargs; " \
	51	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	52	"if run loadfdt; then " \
	53	"bootz ${loadaddr} - ${fdt_addr}; " \
	54	"else " \
	55	"if test ${boot_fdt} = try; then " \
	56	"bootz; " \
	57	"else " \
	58	"echo WARN: Cannot load the DT; " \
	59	"fi; " \
	60	"fi; " \
	61	"else " \
	62	"bootz; " \
	63	"fi;\0" \
	64	"netargs=setenv bootargs console=${console},${baudrate} " \
	65	"root=/dev/nfs " \
	66	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	67	"netboot=echo Booting from net ...; " \
	68	"usb start; " \
	69	"run netargs; " \
	70	"if test ${ip_dyn} = yes; then " \
	71	"setenv get_cmd dhcp; " \
	72	"else " \
	73	"setenv get_cmd tftp; " \
	74	"fi; " \
	75	"${get_cmd} ${image}; " \
	76	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	77	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	78	"bootz ${loadaddr} - ${fdt_addr}; " \
	79	"else " \
	80	"if test ${boot_fdt} = try; then " \
	81	"bootz; " \
	82	"else " \
	83	"echo WARN: Cannot load the DT; " \
	84	"fi; " \
	85	"fi; " \
	86	"else " \
	87	"bootz; " \
88	"fi;\0"
89
90	#define CONFIG_BOOTCOMMAND \
91	"mmc dev ${mmcdev};" \
92	"mmc dev ${mmcdev}; if mmc rescan; then " \
93	"if run loadbootscript; then " \
94	"run bootscript; " \
95	"else " \
96	"if run loadimage; then " \
97	"run mmcboot; " \
98	"else run netboot; " \
99	"fi; " \
100	"fi; " \
101	"else run netboot; fi"
102
103	/* Miscellaneous configurable options */
47f73504	104
47f73504	105	/* Physical Memory Map */
47f73504 PF	106	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	107	#define PHYS_SDRAM_SIZE SZ_2G
	108
	109	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	110	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	111	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	112
	113	#define CONFIG_SYS_INIT_SP_OFFSET \
	114	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	115	#define CONFIG_SYS_INIT_SP_ADDR \
	116	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	117
	118	/* Environment organization */
47f73504 PF	119	#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
47f73504 PF	120
47f73504 PF	121	/* MMC Configs */
	122	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
	123	#define CONFIG_SYS_FSL_USDHC_NUM 3
47f73504	124
47f73504 PF	125	#define CONFIG_IOMUX_LPSR
47f73504 PF	126
1f1745c6 PF	127	/* USB Configs */
1f1745c6 PF	128	#ifdef CONFIG_CMD_USB
1f1745c6 PF	129	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	130	#endif
	131
1af3c7f4	132	#include <linux/stringify.h>
47f73504	133	#endif /* __CONFIG_H */