[J-u-boot.git] / include / configs / mccmon6.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016-2017
 * Lukasz Majewski, DENX Software Engineering, [email protected]
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#include "imx6_spl.h"

#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000

/*
 * Below defines are set but NOT really used since we by
 * design force U-Boot run when we boot in development
 * mode from SD card (SD2)
 */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_UART_BASE		UART1_BASE

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)

/* MMC Configuration */
#define CONFIG_SYS_FSL_USDHC_NUM	2
#define CONFIG_SYS_FSL_ESDHC_ADDR	0

/* NOR 16-bit mode */
#define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_FLASH_VERIFY

/* NOR Flash MTD */
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
#define CONFIG_SYS_FLASH_BANKS_LIST	{ (CONFIG_SYS_FLASH_BASE) }
#define CONFIG_SYS_FLASH_BANKS_SIZES	{ (32 * SZ_1M) }

/* Ethernet Configuration */
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR		1

#define CONFIG_EXTRA_ENV_SETTINGS \
	"console=ttymxc0,115200 quiet\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"boot_os=yes\0" \
	"kernelsize=0x300000\0" \
	"disable_giga=yes\0" \
	"download_kernel=" \
		"tftpboot ${loadaddr} ${kernel_file};\0" \
	"get_boot_medium=" \
		"setenv boot_medium nor;" \
		"setexpr.l _src_sbmr1 *0x020d8004;" \
		"setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
		"if test ${_b_medium} = 40; then " \
			"setenv boot_medium sdcard;" \
		"fi\0" \
	"kernel_file=fitImage\0" \
	"boot_sd=" \
		"echo '#######################';" \
		"echo '# Factory SDcard Boot #';" \
		"echo '#######################';" \
		"setenv mmcdev 1;" \
		"setenv mmcfactorydev 0;" \
		"setenv mmcfactorypart 1;" \
		"run factory_flash_img;\0" \
	"boot_nor=" \
		"setenv kernelnor 0x08180000;" \
		"setenv bootargs console=${console} " \
		CONFIG_MTDPARTS_DEFAULT " " \
		"root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
		"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
		"bootm ${loadaddr};reset;\0" \
	"boot_recovery=" \
		"echo '#######################';" \
		"echo '# RECOVERY SWU Boot   #';" \
		"echo '#######################';" \
		"setenv rootfsloadaddr 0x13000000;" \
		"setenv swukernelnor 0x08980000;" \
		"setenv swurootfsnor 0x09180000;" \
		"setenv bootargs console=${console} " \
		CONFIG_MTDPARTS_DEFAULT " " \
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
		    ":${hostname}::off root=/dev/ram rw;" \
		"cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
		"cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
		"bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
	"boot_tftp=" \
		"echo '#######################';" \
		"echo '# TFTP Boot           #';" \
		"echo '#######################';" \
		"if run download_kernel; then " \
		     "setenv bootargs console=${console} " \
		     "root=/dev/mmcblk0p2 rootwait;" \
		     "bootm $loadaddr};reset;" \
		"fi\0" \
	"bootcmd=" \
		"if test -n ${recovery_status}; then " \
		     "run boot_recovery;" \
		"else " \
		     "if test ! -n ${boot_medium}; then " \
			  "run get_boot_medium;" \
			  "if test ${boot_medium} = sdcard; then " \
			      "run boot_sd;" \
			  "else " \
			      "run boot_nor;" \
			  "fi;" \
		     "else " \
			  "if test ${boot_medium} = tftp; then " \
			      "run boot_tftp;" \
			  "fi;" \
		     "fi;" \
		"fi\0" \
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"bootdev=1\0" \
	"bootpart=1\0" \
	"netdev=eth0\0" \
	"load_addr=0x11000000\0" \
	"uboot_file=u-boot.img\0" \
	"SPL_file=SPL\0" \
	"load_uboot=tftp ${load_addr} ${uboot_file}\0" \
	"nor_img_addr=0x11000000\0" \
	"nor_img_file=core-image-lwn-mccmon6.nor\0" \
	"emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
	"nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
	"nor_img_size=0x02000000\0" \
	"factory_script_file=factory.scr\0" \
	"factory_load_script=" \
		"if test -e mmc ${mmcdev}:${mmcfactorypart} " \
		    "${factory_script_file}; then " \
		    "load mmc ${mmcdev}:${mmcfactorypart} " \
		     "${loadaddr} ${factory_script_file};" \
		"fi\0" \
	"factory_script=echo Running factory script from mmc${mmcdev} ...; " \
		"source ${loadaddr}\0" \
	"factory_flash_img="\
		"echo 'Flash mccmon6 with factory images'; " \
		"if run factory_load_script; then " \
			"run factory_script;" \
		"else " \
		    "echo No factory script: ${factory_script_file} found on " \
		    "device ${mmcdev};" \
		    "run factory_nor_img;" \
		    "run factory_eMMC_img;" \
		    "run factory_SPL_falcon_setup;" \
		"fi\0" \
	"factory_eMMC_img="\
		"echo 'Update mccmon6 eMMC image'; " \
		"if load mmc ${mmcdev}:${mmcfactorypart} " \
		    "${loadaddr} ${emmc_img_file}; then " \
		    "setexpr fw_sz ${filesize} / 0x200;" \
		    "setexpr fw_sz ${fw_sz} + 1;" \
		    "mmc dev ${mmcfactorydev};" \
		    "mmc write ${loadaddr} 0x0 ${fw_sz};" \
		"fi\0" \
	"factory_nor_img="\
		"echo 'Update mccmon6 NOR image'; " \
		"if load mmc ${mmcdev}:${mmcfactorypart} " \
		    "${nor_img_addr} ${nor_img_file}; then " \
			"run nor_update;" \
		"fi\0" \
	"nor_update=" \
		    "protect off ${nor_bank_start} +${nor_img_size};" \
		    "erase ${nor_bank_start} +${nor_img_size};" \
		    "setexpr nor_img_size ${nor_img_size} / 4; " \
		    "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
	"factory_SPL_falcon_setup="\
		"echo 'Write Falcon boot data'; " \
		"setenv kernelnor 0x08180000;" \
		"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
		"spl export fdt ${loadaddr};" \
		"setenv nor_img_addr ${fdtargsaddr};" \
		"setenv nor_img_size 0x20000;" \
		"setenv nor_bank_start " \
				__stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
		"run nor_update\0" \
	"tftp_nor_uboot="\
		"echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
		"setenv nor_img_file u-boot.img; " \
		"setenv nor_img_size 0x80000; " \
		"setenv nor_bank_start 0x08080000; " \
		"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
		    "run nor_update;" \
		"fi\0" \
	"tftp_nor_fitImg="\
		"echo 'Update mccmon6 NOR fitImage via TFTP'; " \
		"setenv nor_img_file fitImage; " \
		"setenv nor_img_size 0x500000; " \
		"setenv nor_bank_start 0x08180000; " \
		"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
		    "run nor_update;" \
		"fi\0" \
	"tftp_nor_img="\
		"echo 'Update mccmon6 NOR image via TFTP'; " \
		"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
		    "run nor_update;" \
		"fi\0" \
	"tftp_nor_SPL="\
		"if tftp ${load_addr} SPL_padded; then " \
		    "erase 0x08000000 +0x20000;" \
		    "cp.b ${load_addr} 0x08000000 0x20000;" \
		"fi;\0" \
	"tftp_sd_SPL="\
	    "if mmc dev 1; then "      \
		"if tftp ${load_addr} ${SPL_file}; then " \
		    "setexpr fw_sz ${filesize} / 0x200; " \
		    "setexpr fw_sz ${fw_sz} + 1; " \
		    "mmc write ${load_addr} 0x2 ${fw_sz};" \
		"fi;" \
	    "fi;\0" \
	"tftp_sd_uboot="\
	    "if mmc dev 1; then "      \
		"if run load_uboot; then " \
		    "setexpr fw_sz ${filesize} / 0x200; " \
		    "setexpr fw_sz ${fw_sz} + 1; " \
		    "mmc write ${load_addr} 0x8A ${fw_sz};" \
		"fi;" \
	    "fi;\0"

/* Physical Memory Map */
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */

/* Envs are stored in NOR flash */

#endif			       /* __CONFIG_H * */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
11bd5e7b LM	2	/*
	3	* Copyright (C) 2016-2017
	4	* Lukasz Majewski, DENX Software Engineering, [email protected]
11bd5e7b LM	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
11bd5e7b LM	10	#include "mx6_common.h"
	11
	12	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	13	#include "imx6_spl.h"
	14
11bd5e7b LM	15	#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
11bd5e7b LM	16	#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
11bd5e7b LM	17	#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
	18
	19	/*
	20	* Below defines are set but NOT really used since we by
	21	* design force U-Boot run when we boot in development
	22	* mode from SD card (SD2)
	23	*/
	24	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
	25	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
	26	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
e4417ed0	27	#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
11bd5e7b LM	28
	29	/* Size of malloc() pool */
	30	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	31
11bd5e7b	32	#define CONFIG_BOARD_LATE_INIT
11bd5e7b LM	33	#define CONFIG_MXC_UART_BASE UART1_BASE
	34
	35	#define CONFIG_SYS_MEMTEST_START 0x10000000
	36	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
	37
11bd5e7b LM	38	/* MMC Configuration */
	39	#define CONFIG_SYS_FSL_USDHC_NUM 2
	40	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	41
11bd5e7b LM	42	/* NOR 16-bit mode */
11bd5e7b LM	43	#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR
11bd5e7b	44	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
11bd5e7b	45	#define CONFIG_SYS_FLASH_EMPTY_INFO
11bd5e7b LM	46	#define CONFIG_FLASH_VERIFY
	47
	48	/* NOR Flash MTD */
11bd5e7b LM	49	#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
	50	#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
	51	#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) }
	52
11bd5e7b	53	/* Ethernet Configuration */
11bd5e7b	54	#define IMX_FEC_BASE ENET_BASE_ADDR
11bd5e7b	55	#define CONFIG_FEC_MXC_PHYADDR 1
11bd5e7b	56
11bd5e7b	57	#define CONFIG_EXTRA_ENV_SETTINGS \
cb11a28a	58	"console=ttymxc0,115200 quiet\0" \
11bd5e7b LM	59	"fdt_high=0xffffffff\0" \
	60	"initrd_high=0xffffffff\0" \
	61	"boot_os=yes\0" \
e4417ed0	62	"kernelsize=0x300000\0" \
917964cb	63	"disable_giga=yes\0" \
11bd5e7b	64	"download_kernel=" \
e4417ed0	65	"tftpboot ${loadaddr} ${kernel_file};\0" \
11bd5e7b LM	66	"get_boot_medium=" \
	67	"setenv boot_medium nor;" \
	68	"setexpr.l _src_sbmr1 *0x020d8004;" \
	69	"setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
	70	"if test ${_b_medium} = 40; then " \
	71	"setenv boot_medium sdcard;" \
	72	"fi\0" \
e4417ed0	73	"kernel_file=fitImage\0" \
11bd5e7b LM	74	"boot_sd=" \
	75	"echo '#######################';" \
	76	"echo '# Factory SDcard Boot #';" \
	77	"echo '#######################';" \
	78	"setenv mmcdev 1;" \
	79	"setenv mmcfactorydev 0;" \
	80	"setenv mmcfactorypart 1;" \
	81	"run factory_flash_img;\0" \
	82	"boot_nor=" \
	83	"setenv kernelnor 0x08180000;" \
cb11a28a	84	"setenv bootargs console=${console} " \
43ede0bc	85	CONFIG_MTDPARTS_DEFAULT " " \
11bd5e7b	86	"root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
e4417ed0 LM	87	"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
e4417ed0 LM	88	"bootm ${loadaddr};reset;\0" \
11bd5e7b LM	89	"boot_recovery=" \
	90	"echo '#######################';" \
	91	"echo '# RECOVERY SWU Boot #';" \
	92	"echo '#######################';" \
	93	"setenv rootfsloadaddr 0x13000000;" \
	94	"setenv swukernelnor 0x08980000;" \
	95	"setenv swurootfsnor 0x09180000;" \
11bd5e7b	96	"setenv bootargs console=${console} " \
43ede0bc	97	CONFIG_MTDPARTS_DEFAULT " " \
11bd5e7b LM	98	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	99	":${hostname}::off root=/dev/ram rw;" \
	100	"cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
e4417ed0 LM	101	"cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
e4417ed0 LM	102	"bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
11bd5e7b LM	103	"boot_tftp=" \
	104	"echo '#######################';" \
	105	"echo '# TFTP Boot #';" \
	106	"echo '#######################';" \
	107	"if run download_kernel; then " \
	108	"setenv bootargs console=${console} " \
	109	"root=/dev/mmcblk0p2 rootwait;" \
e4417ed0	110	"bootm $loadaddr};reset;" \
11bd5e7b LM	111	"fi\0" \
	112	"bootcmd=" \
	113	"if test -n ${recovery_status}; then " \
	114	"run boot_recovery;" \
	115	"else " \
	116	"if test ! -n ${boot_medium}; then " \
	117	"run get_boot_medium;" \
	118	"if test ${boot_medium} = sdcard; then " \
	119	"run boot_sd;" \
	120	"else " \
	121	"run boot_nor;" \
	122	"fi;" \
	123	"else " \
	124	"if test ${boot_medium} = tftp; then " \
	125	"run boot_tftp;" \
	126	"fi;" \
	127	"fi;" \
	128	"fi\0" \
43ede0bc	129	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
11bd5e7b LM	130	"bootdev=1\0" \
11bd5e7b LM	131	"bootpart=1\0" \
11bd5e7b LM	132	"netdev=eth0\0" \
11bd5e7b LM	133	"load_addr=0x11000000\0" \
11bd5e7b LM	134	"uboot_file=u-boot.img\0" \
	135	"SPL_file=SPL\0" \
	136	"load_uboot=tftp ${load_addr} ${uboot_file}\0" \
	137	"nor_img_addr=0x11000000\0" \
	138	"nor_img_file=core-image-lwn-mccmon6.nor\0" \
	139	"emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
	140	"nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
	141	"nor_img_size=0x02000000\0" \
	142	"factory_script_file=factory.scr\0" \
	143	"factory_load_script=" \
	144	"if test -e mmc ${mmcdev}:${mmcfactorypart} " \
	145	"${factory_script_file}; then " \
	146	"load mmc ${mmcdev}:${mmcfactorypart} " \
	147	"${loadaddr} ${factory_script_file};" \
	148	"fi\0" \
	149	"factory_script=echo Running factory script from mmc${mmcdev} ...; " \
	150	"source ${loadaddr}\0" \
	151	"factory_flash_img="\
	152	"echo 'Flash mccmon6 with factory images'; " \
	153	"if run factory_load_script; then " \
	154	"run factory_script;" \
	155	"else " \
	156	"echo No factory script: ${factory_script_file} found on " \
	157	"device ${mmcdev};" \
	158	"run factory_nor_img;" \
	159	"run factory_eMMC_img;" \
e4417ed0	160	"run factory_SPL_falcon_setup;" \
11bd5e7b LM	161	"fi\0" \
	162	"factory_eMMC_img="\
	163	"echo 'Update mccmon6 eMMC image'; " \
	164	"if load mmc ${mmcdev}:${mmcfactorypart} " \
	165	"${loadaddr} ${emmc_img_file}; then " \
	166	"setexpr fw_sz ${filesize} / 0x200;" \
	167	"setexpr fw_sz ${fw_sz} + 1;" \
	168	"mmc dev ${mmcfactorydev};" \
	169	"mmc write ${loadaddr} 0x0 ${fw_sz};" \
	170	"fi\0" \
	171	"factory_nor_img="\
	172	"echo 'Update mccmon6 NOR image'; " \
	173	"if load mmc ${mmcdev}:${mmcfactorypart} " \
	174	"${nor_img_addr} ${nor_img_file}; then " \
	175	"run nor_update;" \
	176	"fi\0" \
	177	"nor_update=" \
	178	"protect off ${nor_bank_start} +${nor_img_size};" \
	179	"erase ${nor_bank_start} +${nor_img_size};" \
	180	"setexpr nor_img_size ${nor_img_size} / 4; " \
	181	"cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
e4417ed0 LM	182	"factory_SPL_falcon_setup="\
	183	"echo 'Write Falcon boot data'; " \
	184	"setenv kernelnor 0x08180000;" \
	185	"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
	186	"spl export fdt ${loadaddr};" \
	187	"setenv nor_img_addr ${fdtargsaddr};" \
	188	"setenv nor_img_size 0x20000;" \
	189	"setenv nor_bank_start " \
	190	__stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
	191	"run nor_update\0" \
11bd5e7b LM	192	"tftp_nor_uboot="\
	193	"echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
	194	"setenv nor_img_file u-boot.img; " \
	195	"setenv nor_img_size 0x80000; " \
	196	"setenv nor_bank_start 0x08080000; " \
	197	"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
	198	"run nor_update;" \
	199	"fi\0" \
e4417ed0 LM	200	"tftp_nor_fitImg="\
	201	"echo 'Update mccmon6 NOR fitImage via TFTP'; " \
	202	"setenv nor_img_file fitImage; " \
11bd5e7b LM	203	"setenv nor_img_size 0x500000; " \
	204	"setenv nor_bank_start 0x08180000; " \
	205	"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
	206	"run nor_update;" \
	207	"fi\0" \
	208	"tftp_nor_img="\
	209	"echo 'Update mccmon6 NOR image via TFTP'; " \
	210	"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
	211	"run nor_update;" \
	212	"fi\0" \
	213	"tftp_nor_SPL="\
	214	"if tftp ${load_addr} SPL_padded; then " \
	215	"erase 0x08000000 +0x20000;" \
	216	"cp.b ${load_addr} 0x08000000 0x20000;" \
	217	"fi;\0" \
	218	"tftp_sd_SPL="\
	219	"if mmc dev 1; then " \
	220	"if tftp ${load_addr} ${SPL_file}; then " \
	221	"setexpr fw_sz ${filesize} / 0x200; " \
	222	"setexpr fw_sz ${fw_sz} + 1; " \
	223	"mmc write ${load_addr} 0x2 ${fw_sz};" \
	224	"fi;" \
	225	"fi;\0" \
	226	"tftp_sd_uboot="\
	227	"if mmc dev 1; then " \
	228	"if run load_uboot; then " \
	229	"setexpr fw_sz ${filesize} / 0x200; " \
	230	"setexpr fw_sz ${fw_sz} + 1; " \
	231	"mmc write ${load_addr} 0x8A ${fw_sz};" \
	232	"fi;" \
	233	"fi;\0"
	234
	235	/* Physical Memory Map */
11bd5e7b LM	236	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	237
	238	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	239	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	240	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	241
	242	#define CONFIG_SYS_INIT_SP_OFFSET \
	243	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	244	#define CONFIG_SYS_INIT_SP_ADDR \
	245	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	246
	247	/* Environment organization */
11bd5e7b LM	248
11bd5e7b LM	249	/* Envs are stored in NOR flash */
11bd5e7b LM	250
11bd5e7b LM	251	#endif /* __CONFIG_H * */