[J-u-boot.git] / include / configs / PMC405.h

/*
 * (C) Copyright 2001-2004
 * Stefan Roese, esd gmbh germany, [email protected]
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_PMC405		1	/* ...on a PMC405 board		*/

#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
#define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/

#define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/

#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

#undef	CONFIG_BOOTARGS
#undef	CONFIG_BOOTCOMMAND

#define CONFIG_PREBOOT                  /* enable preboot variable      */

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_NET_MULTI	1
#undef  CONFIG_HAS_ETH1

#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0	/* PHY address			*/
#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */

#define CONFIG_NETCONSOLE		/* include NetConsole support	*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_BSP
#define CONFIG_CMD_PCI
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DATE
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_I2C
#define CONFIG_CMD_PING
#define CONFIG_CMD_UNIVERSE
#define CONFIG_CMD_EEPROM


#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define CONFIG_RTC_MC146818             /* DS1685 is MC146818 compatible*/
#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address         */

#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/

#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
#ifdef	CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#endif

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/

#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/

#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
#define CONFIG_SYS_BASE_BAUD	    691200

/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

#define CONFIG_LOOPW            1       /* enable loopw command         */

#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */

#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
#define PCI_HOST_FORCE  1               /* configure as pci host        */
#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */

#define CONFIG_PCI			/* include pci support	        */
#define CONFIG_PCI_HOST	PCI_HOST_AUTO   /* select pci host function     */
#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
					/* resource configuration       */

#define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */

#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/

#define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/

#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408  /* PCI Device ID: Non-Monarch */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409     /* PCI Device ID: Monarch */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid()

#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/

#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
#if 1
#define CONFIG_SYS_PCI_PTM2LA	0xef000000	/* point to internal regs       */
#define CONFIG_SYS_PCI_PTM2MS  0xff000001      /* 16MB, enable                 */
#define CONFIG_SYS_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
#else /* old mapping */
#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
#endif
/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_FLASH_BASE		0xFE000000
#define CONFIG_SYS_FLASH_INCREMENT	0x01000000

#define CONFIG_SYS_FLASH_CFI         1       /* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER  1       /* Use the common driver */
#define CONFIG_SYS_FLASH_PROTECTION  1       /* don't use hardware protection        */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1  /* use buffered writes (20x faster)     */
#define CONFIG_SYS_MAX_FLASH_BANKS   2       /* max num of flash banks */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT }
#define CONFIG_SYS_MAX_FLASH_SECT    128     /* max num of sects on one chip */

#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

/*
 * JFFS2 partitions - second bank contains u-boot
 *
 */
/* No command line, one static partition, whole device */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV		"nor0"
#define CONFIG_JFFS2_PART_SIZE		0x01b00000
#define CONFIG_JFFS2_PART_OFFSET	0x00400000

/* mtdparts command line support */
/* Note: fake mtd_id used, no linux mtd map file */
/*
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT		"nor0=pmc405-0"
#define MTDPARTS_DEFAULT	"mtdparts=pmc405-0:-(jffs2)"
*/

/*-----------------------------------------------------------------------
 * Environment Variable setup
 */
#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
				   /* total size of a CAT24WC16 is 2048 bytes */

#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/

/*-----------------------------------------------------------------------
 * I2C EEPROM (CAT24WC16) for environment
 */
#define CONFIG_HARD_I2C			/* I2c with hardware support */
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
					/* 16 byte page write mode using*/
					/* last 4 bits of the address	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 */
#define FLASH0_BA	0xFF000000	    /* FLASH 0 Base Address		*/
#define FLASH1_BA	0xFE000000	    /* FLASH 1 Base Address		*/
#define CAN_BA		0xF0000000	    /* CAN Base Address			*/
#define RTC_BA		0xF0000500	    /* RTC Base Address			*/
#define NVRAM_BA        0xF0200000          /* NVRAM Base Address               */

/* Memory Bank 0 (Flash Bank 0) initialization					*/
#define CONFIG_SYS_EBC_PB0AP	0x92015480
#define CONFIG_SYS_EBC_PB0CR	FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/

/* Memory Bank 1 (Flash Bank 1) initialization					*/
#define CONFIG_SYS_EBC_PB1AP	0x92015480
#define CONFIG_SYS_EBC_PB1CR	FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/

/* Memory Bank 2 (CAN0, 1, RTC) initialization					*/
#define CONFIG_SYS_EBC_PB2AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
#define CONFIG_SYS_EBC_PB2CR	CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 3 -> unused */

/* Memory Bank 4 (NVRAM) initialization					*/
#define CONFIG_SYS_EBC_PB4AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
#define CONFIG_SYS_EBC_PB4CR	NVRAM_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/

/*-----------------------------------------------------------------------
 * FPGA stuff
 */
#define CONFIG_SYS_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */

/* FPGA program pin configuration */
#define CONFIG_SYS_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
#define CONFIG_SYS_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
#define CONFIG_SYS_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
#define CONFIG_SYS_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
#define CONFIG_SYS_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */

#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */

/*-----------------------------------------------------------------------
 * GPIOs
 */
#define CONFIG_SYS_NONMONARCH		(0x80000000 >> 14)   /* GPIO24 */
#define CONFIG_SYS_XEREADY		(0x80000000 >> 15)   /* GPIO15 */
#define CONFIG_SYS_INTA_FAKE		(0x80000000 >> 19)   /* GPIO19 */
#define CONFIG_SYS_SELF_RST		(0x80000000 >> 21)   /* GPIO21 */
#define CONFIG_SYS_REV1_2		(0x80000000 >> 23)   /* GPIO23 */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in data cache)
 */

/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
#define CONFIG_SYS_TEMP_STACK_OCM	1

/* On Chip Memory location */
#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000

#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
071d897c	1	/*
a20b27a3	2	* (C) Copyright 2001-2004
071d897c SR	3	* Stefan Roese, esd gmbh germany, [email protected]
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_405GP 1 /* This is a PPC405 CPU */
c837dcb1 WD	37	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
c837dcb1 WD	38	#define CONFIG_PMC405 1 /* ...on a PMC405 board */
071d897c	39
c837dcb1 WD	40	#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
c837dcb1 WD	41	#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
071d897c	42
a20b27a3	43	#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
071d897c SR	44
	45	#define CONFIG_BAUDRATE 9600
	46	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	47
	48	#undef CONFIG_BOOTARGS
a20b27a3 SR	49	#undef CONFIG_BOOTCOMMAND
	50
	51	#define CONFIG_PREBOOT /* enable preboot variable */
071d897c SR	52
071d897c SR	53	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	54	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
071d897c	55
2076d0a1 SR	56	#define CONFIG_NET_MULTI 1
	57	#undef CONFIG_HAS_ETH1
	58
071d897c	59	#define CONFIG_MII 1 /* MII PHY management */
c837dcb1	60	#define CONFIG_PHY_ADDR 0 /* PHY address */
a20b27a3	61	#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
2076d0a1 SR	62	#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
	63
	64	#define CONFIG_NETCONSOLE /* include NetConsole support */
071d897c	65
acf02697	66
a1aa0bb5 JL	67	/*
	68	* BOOTP options
	69	*/
	70	#define CONFIG_BOOTP_BOOTFILESIZE
	71	#define CONFIG_BOOTP_BOOTPATH
	72	#define CONFIG_BOOTP_GATEWAY
	73	#define CONFIG_BOOTP_HOSTNAME
	74
	75
acf02697 JL	76	/*
	77	* Command line configuration.
	78	*/
	79	#include <config_cmd_default.h>
	80
	81	#define CONFIG_CMD_BSP
	82	#define CONFIG_CMD_PCI
	83	#define CONFIG_CMD_IRQ
	84	#define CONFIG_CMD_ELF
	85	#define CONFIG_CMD_DATE
	86	#define CONFIG_CMD_JFFS2
	87	#define CONFIG_CMD_MII
	88	#define CONFIG_CMD_I2C
	89	#define CONFIG_CMD_PING
	90	#define CONFIG_CMD_UNIVERSE
	91	#define CONFIG_CMD_EEPROM
	92
071d897c SR	93
	94	#define CONFIG_MAC_PARTITION
	95	#define CONFIG_DOS_PARTITION
	96
c837dcb1	97	#undef CONFIG_WATCHDOG /* watchdog disabled */
071d897c	98
a20b27a3	99	#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
6d0f6bcf	100	#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */
071d897c	101
c837dcb1	102	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
071d897c SR	103
	104	/*
	105	* Miscellaneous configurable options
	106	*/
6d0f6bcf JCPV	107	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	108	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
071d897c	109
6d0f6bcf JCPV	110	#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	111	#ifdef CONFIG_SYS_HUSH_PARSER
	112	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
071d897c SR	113	#endif
071d897c SR	114
acf02697	115	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	116	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
071d897c	117	#else
6d0f6bcf	118	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
071d897c	119	#endif
6d0f6bcf JCPV	120	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	121	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	122	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
071d897c	123
6d0f6bcf	124	#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
071d897c	125
6d0f6bcf	126	#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
071d897c	127
a20b27a3 SR	128	#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
a20b27a3 SR	129
6d0f6bcf JCPV	130	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	131	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
071d897c	132
6d0f6bcf JCPV	133	#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
	134	#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
	135	#define CONFIG_SYS_BASE_BAUD 691200
071d897c SR	136
071d897c SR	137	/* The following table includes the supported baudrates */
6d0f6bcf	138	#define CONFIG_SYS_BAUDRATE_TABLE \
8bde7f77 WD	139	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
8bde7f77 WD	140	57600, 115200, 230400, 460800, 921600 }
071d897c	141
6d0f6bcf JCPV	142	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	143	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
071d897c	144
6d0f6bcf	145	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
071d897c	146
a20b27a3 SR	147	#define CONFIG_LOOPW 1 /* enable loopw command */
a20b27a3 SR	148
071d897c SR	149	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
071d897c SR	150
c837dcb1	151	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
53cf9435	152
6d0f6bcf	153	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
53cf9435	154
071d897c SR	155	/*-----------------------------------------------------------------------
	156	* PCI stuff
	157	*-----------------------------------------------------------------------
	158	*/
a20b27a3 SR	159	#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
	160	#define PCI_HOST_FORCE 1 /* configure as pci host */
	161	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	162
	163	#define CONFIG_PCI /* include pci support */
	164	#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
	165	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	166	/* resource configuration */
	167
	168	#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
	169
	170	#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
	171
	172	#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
	173
6d0f6bcf JCPV	174	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
	175	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID: Non-Monarch */
	176	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID: Monarch */
	177	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid()
2076d0a1	178
6d0f6bcf	179	#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
2076d0a1	180
6d0f6bcf JCPV	181	#define CONFIG_SYS_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
	182	#define CONFIG_SYS_PCI_PTM1MS (~(bd->bi_memsize - 1) \| 1) /* memsize, enable hard-wired to 1 */
	183	#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
2076d0a1	184	#if 1
6d0f6bcf JCPV	185	#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to internal regs */
	186	#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable */
	187	#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
2076d0a1	188	#else /* old mapping */
6d0f6bcf JCPV	189	#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
	190	#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
	191	#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
2076d0a1	192	#endif
071d897c SR	193	/*-----------------------------------------------------------------------
	194	* Start addresses for the final memory configuration
	195	* (Set up by the startup code)
6d0f6bcf	196	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
071d897c	197	*/
6d0f6bcf JCPV	198	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	199	#define CONFIG_SYS_MONITOR_BASE 0xFFFC0000
	200	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
	201	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
071d897c SR	202
	203	/*
	204	* For booting Linux, the board info and command line data
	205	* have to be in the first 8 MB of memory, since this is
	206	* the maximum mapped by the Linux kernel during initialization.
	207	*/
6d0f6bcf	208	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
071d897c SR	209
	210	/*-----------------------------------------------------------------------
	211	* FLASH organization
	212	*/
6d0f6bcf JCPV	213	#define CONFIG_SYS_FLASH_BASE 0xFE000000
6d0f6bcf JCPV	214	#define CONFIG_SYS_FLASH_INCREMENT 0x01000000
071d897c	215
6d0f6bcf	216	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
00b1883a	217	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
6d0f6bcf JCPV	218	#define CONFIG_SYS_FLASH_PROTECTION 1 /* don't use hardware protection */
	219	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
	220	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
	221	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT }
	222	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
026cb5d8	223
6d0f6bcf	224	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
071d897c	225
700a0c64 WD	226	/*
	227	* JFFS2 partitions - second bank contains u-boot
	228	*
	229	*/
	230	/* No command line, one static partition, whole device */
	231	#undef CONFIG_JFFS2_CMDLINE
	232	#define CONFIG_JFFS2_DEV "nor0"
026cb5d8 SR	233	#define CONFIG_JFFS2_PART_SIZE 0x01b00000
026cb5d8 SR	234	#define CONFIG_JFFS2_PART_OFFSET 0x00400000
700a0c64 WD	235
	236	/* mtdparts command line support */
	237	/* Note: fake mtd_id used, no linux mtd map file */
	238	/*
	239	#define CONFIG_JFFS2_CMDLINE
	240	#define MTDIDS_DEFAULT "nor0=pmc405-0"
	241	#define MTDPARTS_DEFAULT "mtdparts=pmc405-0:-(jffs2)"
	242	*/
071d897c SR	243
	244	/*-----------------------------------------------------------------------
	245	* Environment Variable setup
	246	*/
bb1f8b4f	247	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
0e8d1586 JCPV	248	#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
0e8d1586 JCPV	249	#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/
8bde7f77	250	/* total size of a CAT24WC16 is 2048 bytes */
071d897c	251
6d0f6bcf JCPV	252	#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */
6d0f6bcf JCPV	253	#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */
071d897c SR	254
	255	/*-----------------------------------------------------------------------
	256	* I2C EEPROM (CAT24WC16) for environment
	257	*/
	258	#define CONFIG_HARD_I2C /* I2c with hardware support */
6d0f6bcf JCPV	259	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
6d0f6bcf JCPV	260	#define CONFIG_SYS_I2C_SLAVE 0x7F
071d897c	261
6d0f6bcf JCPV	262	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
6d0f6bcf JCPV	263	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
c837dcb1	264	/* mask of address bits that overflow into the "EEPROM chip address" */
6d0f6bcf JCPV	265	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
6d0f6bcf JCPV	266	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
071d897c	267	/* 16 byte page write mode using*/
c837dcb1	268	/* last 4 bits of the address */
6d0f6bcf	269	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
071d897c	270
071d897c SR	271	/*-----------------------------------------------------------------------
	272	* External Bus Controller (EBC) Setup
	273	*/
c837dcb1 WD	274	#define FLASH0_BA 0xFF000000 /* FLASH 0 Base Address */
	275	#define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */
	276	#define CAN_BA 0xF0000000 /* CAN Base Address */
	277	#define RTC_BA 0xF0000500 /* RTC Base Address */
2076d0a1	278	#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */
071d897c	279
c837dcb1	280	/* Memory Bank 0 (Flash Bank 0) initialization */
6d0f6bcf JCPV	281	#define CONFIG_SYS_EBC_PB0AP 0x92015480
6d0f6bcf JCPV	282	#define CONFIG_SYS_EBC_PB0CR FLASH0_BA \| 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/
071d897c	283
c837dcb1	284	/* Memory Bank 1 (Flash Bank 1) initialization */
6d0f6bcf JCPV	285	#define CONFIG_SYS_EBC_PB1AP 0x92015480
6d0f6bcf JCPV	286	#define CONFIG_SYS_EBC_PB1CR FLASH1_BA \| 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
071d897c	287
c837dcb1	288	/* Memory Bank 2 (CAN0, 1, RTC) initialization */
6d0f6bcf JCPV	289	#define CONFIG_SYS_EBC_PB2AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
6d0f6bcf JCPV	290	#define CONFIG_SYS_EBC_PB2CR CAN_BA \| 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
071d897c	291
2076d0a1 SR	292	/* Memory Bank 3 -> unused */
	293
	294	/* Memory Bank 4 (NVRAM) initialization */
6d0f6bcf JCPV	295	#define CONFIG_SYS_EBC_PB4AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
6d0f6bcf JCPV	296	#define CONFIG_SYS_EBC_PB4CR NVRAM_BA \| 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
071d897c	297
2853d29b SR	298	/*-----------------------------------------------------------------------
	299	* FPGA stuff
	300	*/
6d0f6bcf JCPV	301	#define CONFIG_SYS_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */
6d0f6bcf JCPV	302	#define CONFIG_SYS_FPGA_MAX_SIZE 321024 / 32kByte is enough for CPLD */
2853d29b SR	303
2853d29b SR	304	/* FPGA program pin configuration */
6d0f6bcf JCPV	305	#define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (ppc output) */
	306	#define CONFIG_SYS_FPGA_CLK 0x02000000 /* JTAG TCK pin (ppc output) */
	307	#define CONFIG_SYS_FPGA_DATA 0x01000000 /* JTAG TDO->TDI data pin (ppc output) */
	308	#define CONFIG_SYS_FPGA_INIT 0x00010000 /* unused (ppc input) */
	309	#define CONFIG_SYS_FPGA_DONE 0x00008000 /* JTAG TDI->TDO pin (ppc input) */
2853d29b	310
6d0f6bcf	311	#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
a20b27a3	312
2076d0a1 SR	313	/*-----------------------------------------------------------------------
	314	* GPIOs
	315	*/
6d0f6bcf JCPV	316	#define CONFIG_SYS_NONMONARCH (0x80000000 >> 14) /* GPIO24 */
	317	#define CONFIG_SYS_XEREADY (0x80000000 >> 15) /* GPIO15 */
	318	#define CONFIG_SYS_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */
	319	#define CONFIG_SYS_SELF_RST (0x80000000 >> 21) /* GPIO21 */
	320	#define CONFIG_SYS_REV1_2 (0x80000000 >> 23) /* GPIO23 */
2076d0a1	321
071d897c SR	322	/*-----------------------------------------------------------------------
	323	* Definitions for initial stack pointer and data area (in data cache)
	324	*/
	325
	326	/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
6d0f6bcf	327	#define CONFIG_SYS_TEMP_STACK_OCM 1
071d897c SR	328
071d897c SR	329	/* On Chip Memory location */
6d0f6bcf JCPV	330	#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
	331	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
	332
	333	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
	334	#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
	335	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	336	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	337	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
071d897c SR	338
	339	/*
	340	* Internal Definitions
	341	*
	342	* Boot Flags
	343	*/
	344	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	345	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	346
	347	#endif /* __CONFIG_H */