[J-u-boot.git] / post / cpu / mpc83xx / ecc.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2010
 * Eastman Kodak Company, <www.kodak.com>
 * Michael Zaidman, <[email protected]>
 *
 * The code is based on the cpu/mpc83xx/ecc.c written by
 * Dave Liu <[email protected]>
 */

#include <common.h>
#include <cpu_func.h>
#include <irq_func.h>
#include <log.h>
#include <mpc83xx.h>
#include <watchdog.h>
#include <asm/io.h>
#include <post.h>

#if CFG_POST & CONFIG_SYS_POST_ECC
/*
 * We use the RAW I/O accessors where possible in order to
 * achieve performance goal, since the test's execution time
 * affects the board start up time.
 */
static inline void ecc_clear(ddr83xx_t *ddr)
{
	/* Clear capture registers */
	__raw_writel(0, &ddr->capture_address);
	__raw_writel(0, &ddr->capture_data_hi);
	__raw_writel(0, &ddr->capture_data_lo);
	__raw_writel(0, &ddr->capture_ecc);
	__raw_writel(0, &ddr->capture_attributes);

	/* Clear SBEC and set SBET to 1 */
	out_be32(&ddr->err_sbe, 1 << ECC_ERROR_MAN_SBET_SHIFT);

	/* Clear Error Detect register */
	out_be32(&ddr->err_detect, ECC_ERROR_DETECT_MME |\
			ECC_ERROR_DETECT_MBE |\
			ECC_ERROR_DETECT_SBE |\
			ECC_ERROR_DETECT_MSE);

	isync();
}

int ecc_post_test(int flags)
{
	int ret = 0;
	int int_state;
	int errbit;
	u32 pattern[2], writeback[2], retval[2];
	ddr83xx_t *ddr = &((immap_t *)CONFIG_SYS_IMMR)->ddr;
	volatile u64 *addr = (u64 *)CONFIG_SYS_POST_ECC_START_ADDR;

	/* The pattern is written into memory to generate error */
	pattern[0] = 0xfedcba98UL;
	pattern[1] = 0x76543210UL;

	/* After injecting error, re-initialize the memory with the value */
	writeback[0] = ~pattern[0];
	writeback[1] = ~pattern[1];

	/* Check if ECC is enabled */
	if (__raw_readl(&ddr->err_disable) & ECC_ERROR_ENABLE) {
		debug("DDR's ECC is not enabled, skipping the ECC POST.\n");
		return 0;
	}

	int_state = disable_interrupts();
	icache_enable();

	for (addr = (u64*)CONFIG_SYS_POST_ECC_START_ADDR, errbit=0;
	     addr < (u64*)CONFIG_SYS_POST_ECC_STOP_ADDR; addr++, errbit++ ) {

		schedule();

		ecc_clear(ddr);

		/* Enable error injection */
		setbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
		sync();
		isync();

		/* Set bit to be injected */
		if (errbit < 32) {
			__raw_writel(1 << errbit, &ddr->data_err_inject_lo);
			__raw_writel(0, &ddr->data_err_inject_hi);
		} else {
			__raw_writel(0, &ddr->data_err_inject_lo);
			__raw_writel(1<<(errbit-32), &ddr->data_err_inject_hi);
		}
		sync();
		isync();

		/* Write memory location injecting SBE */
		ppcDWstore((u32*)addr, pattern);
		sync();

		/* Disable error injection */
		clrbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
		sync();
		isync();

		/* Data read should generate SBE */
		ppcDWload((u32*)addr, retval);
		sync();

		if (!(__raw_readl(&ddr->err_detect) & ECC_ERROR_DETECT_SBE) ||
			(__raw_readl(&ddr->data_err_inject_hi) !=
			(__raw_readl(&ddr->capture_data_hi) ^ pattern[0])) ||
			(__raw_readl(&ddr->data_err_inject_lo) !=
			(__raw_readl(&ddr->capture_data_lo) ^ pattern[1]))) {

			post_log("ECC failed to detect SBE error at %08x, "
				"SBE injection mask %08x-%08x, wrote "
				"%08x-%08x, read %08x-%08x\n", addr,
				ddr->data_err_inject_hi,
				ddr->data_err_inject_lo,
				pattern[0], pattern[1],
				retval[0], retval[1]);

			printf("ERR_DETECT Reg: %08x\n", ddr->err_detect);
			printf("ECC CAPTURE_DATA Reg: %08x-%08x\n",
				ddr->capture_data_hi, ddr->capture_data_lo);
			ret = 1;
			break;
		}

		/* Re-initialize the ECC memory */
		ppcDWstore((u32*)addr, writeback);
		sync();
		isync();

		errbit %= 63;
	}

	ecc_clear(ddr);

	icache_disable();

	if (int_state)
		enable_interrupts();

	return ret;
}
#endif
Commit	Line	Data
83d290c5	1	// SPDX-License-Identifier: GPL-2.0+
93c7e70f MZ	2	/*
	3	* (C) Copyright 2010
	4	* Eastman Kodak Company, <www.kodak.com>
	5	* Michael Zaidman, <[email protected]>
	6	*
	7	* The code is based on the cpu/mpc83xx/ecc.c written by
	8	* Dave Liu <[email protected]>
93c7e70f MZ	9	*/
	10
	11	#include <common.h>
9edefc27	12	#include <cpu_func.h>
1eb69ae4	13	#include <irq_func.h>
f7ae49fc	14	#include <log.h>
93c7e70f MZ	15	#include <mpc83xx.h>
	16	#include <watchdog.h>
	17	#include <asm/io.h>
	18	#include <post.h>
	19
9cebc4ad	20	#if CFG_POST & CONFIG_SYS_POST_ECC
93c7e70f MZ	21	/*
	22	* We use the RAW I/O accessors where possible in order to
	23	* achieve performance goal, since the test's execution time
	24	* affects the board start up time.
	25	*/
	26	static inline void ecc_clear(ddr83xx_t *ddr)
	27	{
	28	/* Clear capture registers */
	29	__raw_writel(0, &ddr->capture_address);
	30	__raw_writel(0, &ddr->capture_data_hi);
	31	__raw_writel(0, &ddr->capture_data_lo);
	32	__raw_writel(0, &ddr->capture_ecc);
	33	__raw_writel(0, &ddr->capture_attributes);
	34
	35	/* Clear SBEC and set SBET to 1 */
	36	out_be32(&ddr->err_sbe, 1 << ECC_ERROR_MAN_SBET_SHIFT);
	37
	38	/* Clear Error Detect register */
	39	out_be32(&ddr->err_detect, ECC_ERROR_DETECT_MME \|\
	40	ECC_ERROR_DETECT_MBE \|\
	41	ECC_ERROR_DETECT_SBE \|\
	42	ECC_ERROR_DETECT_MSE);
	43
	44	isync();
	45	}
	46
	47	int ecc_post_test(int flags)
	48	{
	49	int ret = 0;
	50	int int_state;
	51	int errbit;
	52	u32 pattern[2], writeback[2], retval[2];
	53	ddr83xx_t ddr = &((immap_t )CONFIG_SYS_IMMR)->ddr;
	54	volatile u64 addr = (u64 )CONFIG_SYS_POST_ECC_START_ADDR;
	55
	56	/* The pattern is written into memory to generate error */
	57	pattern[0] = 0xfedcba98UL;
	58	pattern[1] = 0x76543210UL;
	59
	60	/* After injecting error, re-initialize the memory with the value */
	61	writeback[0] = ~pattern[0];
	62	writeback[1] = ~pattern[1];
	63
	64	/* Check if ECC is enabled */
	65	if (__raw_readl(&ddr->err_disable) & ECC_ERROR_ENABLE) {
	66	debug("DDR's ECC is not enabled, skipping the ECC POST.\n");
	67	return 0;
	68	}
	69
	70	int_state = disable_interrupts();
	71	icache_enable();
	72
93c7e70f MZ	73	for (addr = (u64*)CONFIG_SYS_POST_ECC_START_ADDR, errbit=0;
	74	addr < (u64*)CONFIG_SYS_POST_ECC_STOP_ADDR; addr++, errbit++ ) {
	75
29caf930	76	schedule();
93c7e70f MZ	77
	78	ecc_clear(ddr);
	79
	80	/* Enable error injection */
	81	setbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
	82	sync();
	83	isync();
	84
	85	/* Set bit to be injected */
	86	if (errbit < 32) {
	87	__raw_writel(1 << errbit, &ddr->data_err_inject_lo);
	88	__raw_writel(0, &ddr->data_err_inject_hi);
	89	} else {
	90	__raw_writel(0, &ddr->data_err_inject_lo);
	91	__raw_writel(1<<(errbit-32), &ddr->data_err_inject_hi);
	92	}
	93	sync();
	94	isync();
	95
	96	/* Write memory location injecting SBE */
	97	ppcDWstore((u32*)addr, pattern);
	98	sync();
	99
	100	/* Disable error injection */
	101	clrbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
	102	sync();
	103	isync();
	104
	105	/* Data read should generate SBE */
	106	ppcDWload((u32*)addr, retval);
	107	sync();
	108
	109	if (!(__raw_readl(&ddr->err_detect) & ECC_ERROR_DETECT_SBE) \|\|
	110	(__raw_readl(&ddr->data_err_inject_hi) !=
	111	(__raw_readl(&ddr->capture_data_hi) ^ pattern[0])) \|\|
	112	(__raw_readl(&ddr->data_err_inject_lo) !=
	113	(__raw_readl(&ddr->capture_data_lo) ^ pattern[1]))) {
	114
	115	post_log("ECC failed to detect SBE error at %08x, "
	116	"SBE injection mask %08x-%08x, wrote "
	117	"%08x-%08x, read %08x-%08x\n", addr,
	118	ddr->data_err_inject_hi,
	119	ddr->data_err_inject_lo,
	120	pattern[0], pattern[1],
	121	retval[0], retval[1]);
	122
	123	printf("ERR_DETECT Reg: %08x\n", ddr->err_detect);
	124	printf("ECC CAPTURE_DATA Reg: %08x-%08x\n",
	125	ddr->capture_data_hi, ddr->capture_data_lo);
	126	ret = 1;
	127	break;
	128	}
	129
	130	/* Re-initialize the ECC memory */
	131	ppcDWstore((u32*)addr, writeback);
	132	sync();
	133	isync();
	134
	135	errbit %= 63;
	136	}
93c7e70f MZ	137
	138	ecc_clear(ddr);
	139
	140	icache_disable();
	141
	142	if (int_state)
	143	enable_interrupts();
	144
	145	return ret;
	146	}
	147	#endif