[J-u-boot.git] / include / configs / barco.h

/********************************************************************
 *
 * Unless otherwise specified, Copyright (C) 2004-2005 Barco Control Rooms
 *
 * $Source: /home/services/cvs/firmware/ppc/u-boot-1.1.2/include/configs/barco.h,v $
 * $Revision: 1.2 $
 * $Author: mleeman $
 * $Date: 2005/02/21 12:48:58 $
 *
 * Last ChangeLog Entry
 * $Log: barco.h,v $
 * Revision 1.2  2005/02/21 12:48:58  mleeman
 * update of copyright years (feedback wd)
 *
 * Revision 1.1  2005/02/14 09:29:25  mleeman
 * moved barcohydra.h to barco.h
 *
 * Revision 1.4  2005/02/09 12:56:23  mleeman
 * add generic header to track changes in sources
 *
 *
 *******************************************************************/

/*
 * (C) Copyright 2001, 2002
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/* ------------------------------------------------------------------------- */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC824X		1
#define CONFIG_MPC8245		1
#define CONFIG_BARCOBCD_STREAMING	1

#undef USE_DINK32

#define CONFIG_CONS_INDEX     3               /* set to '3' for on-chip DUART */
#define CONFIG_BAUDRATE		9600
#define CONFIG_DRAM_SPEED	100		/* MHz				*/

#define CONFIG_BOOTARGS "mem=32M"


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_DNS


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_PCI

#undef CONFIG_CMD_NET


#define CONFIG_HUSH_PARSER	1 /* use "hush" command parser */
#define CONFIG_BOOTDELAY 	1
#define CONFIG_BOOTCOMMAND 	"boot_default"

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP		1		/* undef to save memory		*/
#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
#define CFG_MAXARGS		16		/* max number of command args	*/
#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */


/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define CONFIG_PCI				/* include pci support		*/
#undef CONFIG_PCI_PNP

#define PCI_ENET0_IOADDR	0x80000000
#define PCI_ENET0_MEMADDR	0x80000000
#define	PCI_ENET1_IOADDR	0x81000000
#define	PCI_ENET1_MEMADDR	0x81000000


/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE		0x00000000
#define CFG_MAX_RAM_SIZE	0x02000000

#define CONFIG_LOGBUFFER
#ifdef	CONFIG_LOGBUFFER
#define CFG_STDOUT_ADDR 	0x1FFC000
#else
#define CFG_STDOUT_ADDR 	0x2B9000
#endif

#define CFG_RESET_ADDRESS	0xFFF00100

#if defined (USE_DINK32)
#define CFG_MONITOR_LEN		0x00030000
#define CFG_MONITOR_BASE	0x00090000
#define CFG_RAMBOOT		1
#define CFG_INIT_RAM_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_INIT_RAM_END	0x10000
#define CFG_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
#else
#undef	CFG_RAMBOOT
#define CFG_MONITOR_LEN		0x00030000
#define CFG_MONITOR_BASE	TEXT_BASE

#define CFG_GBL_DATA_SIZE	128

#define CFG_INIT_RAM_ADDR     0x40000000
#define CFG_INIT_RAM_END      0x1000
#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)

#endif

#define CFG_FLASH_BASE		0xFFF00000
#define CFG_FLASH_SIZE		(8 * 1024 * 1024)	/* Unity has onboard 1MByte flash */
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_OFFSET		0x000047A4	/* Offset of Environment Sector */
#define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
/* #define ENV_CRC		0x8BF6F24B	XXX - FIXME: gets defined automatically */

#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/

#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
#define CFG_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/

#define CFG_EUMB_ADDR		0xFDF00000

#define CFG_FLASH_RANGE_BASE	0xFFC00000	/* flash memory address range	*/
#define CFG_FLASH_RANGE_SIZE	0x00400000
#define FLASH_BASE0_PRELIM	0xFFF00000	/* sandpoint flash		*/
#define FLASH_BASE1_PRELIM	0xFF000000	/* PMC onboard flash		*/

/*
 * select i2c support configuration
 *
 * Supported configurations are {none, software, hardware} drivers.
 * If the software driver is chosen, there are some additional
 * configuration items that the driver uses to drive the port pins.
 */
#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
#define CFG_I2C_SLAVE		0x7F

#ifdef CONFIG_SOFT_I2C
#error "Soft I2C is not configured properly.  Please review!"
#define I2C_PORT		3               /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE		(iop->pdir |=  0x00010000)
#define I2C_TRISTATE		(iop->pdir &= ~0x00010000)
#define I2C_READ		((iop->pdat & 0x00010000) != 0)
#define I2C_SDA(bit)		if(bit) iop->pdat |=  0x00010000; \
				else    iop->pdat &= ~0x00010000
#define I2C_SCL(bit)		if(bit) iop->pdat |=  0x00020000; \
				else    iop->pdat &= ~0x00020000
#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
#endif /* CONFIG_SOFT_I2C */

#define CFG_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
#define CFG_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
#define CFG_EEPROM_PAGE_WRITE_BITS	3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
#define CFG_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
#define CFG_DBUS_SIZE2		1

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */


 /*
 * NS16550 Configuration (internal DUART)
 */
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */

#define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */

#define CFG_ROMNAL		0x0F	/*rom/flash next access time		*/
#define CFG_ROMFAL		0x1E	/*rom/flash access time			*/

#define CFG_REFINT	0x8F	/* no of clock cycles between CBR refresh cycles */

/* the following are for SDRAM only*/
#define CFG_BSTOPRE	0x25C	/* Burst To Precharge, sets open page interval */
#define CFG_REFREC		8	/* Refresh to activate interval		*/
#define CFG_RDLAT		4	/* data latency from read command	*/
#define CFG_PRETOACT		3	/* Precharge to activate interval	*/
#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
#define CFG_ACTORW		2	/* Activate to R/W			*/
#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/

#define CFG_REGISTERD_TYPE_BUFFER   1
#define CFG_EXTROM 0
#define CFG_REGDIMM 0


/* memory bank settings*/
/*
 * only bits 20-29 are actually used from these vales to set the
 * start/end address the upper two bits will be 0, and the lower 20
 * bits will be set to 0x00000 for a start address, or 0xfffff for an
 * end address
 */
#define CFG_BANK0_START		0x00000000
#define CFG_BANK0_END		0x01FFFFFF
#define CFG_BANK0_ENABLE	1
#define CFG_BANK1_START		0x02000000
#define CFG_BANK1_END		0x02ffffff
#define CFG_BANK1_ENABLE	0
#define CFG_BANK2_START		0x03f00000
#define CFG_BANK2_END		0x03ffffff
#define CFG_BANK2_ENABLE	0
#define CFG_BANK3_START		0x04000000
#define CFG_BANK3_END		0x04ffffff
#define CFG_BANK3_ENABLE	0
#define CFG_BANK4_START		0x05000000
#define CFG_BANK4_END		0x05FFFFFF
#define CFG_BANK4_ENABLE	0
#define CFG_BANK5_START		0x06000000
#define CFG_BANK5_END		0x06FFFFFF
#define CFG_BANK5_ENABLE	0
#define CFG_BANK6_START		0x07000000
#define CFG_BANK6_END		0x07FFFFFF
#define CFG_BANK6_ENABLE	0
#define CFG_BANK7_START		0x08000000
#define CFG_BANK7_END		0x08FFFFFF
#define CFG_BANK7_ENABLE	0
/*
 * Memory bank enable bitmask, specifying which of the banks defined above
 are actually present. MSB is for bank #7, LSB is for bank #0.
 */
#define CFG_BANK_ENABLE		0x01

#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
					/* see 8240 book for bit definitions	*/
#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
					/* currently accessed page in memory	*/
					/* see 8240 book for details		*/

/* SDRAM 0 - 256MB */
#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)

/* stack in DCACHE @ 1GB (no backing mem) */
#if defined(USE_DINK32)
#define CFG_IBAT1L	(0x40000000 | BATL_PP_00 )
#define CFG_IBAT1U	(0x40000000 | BATU_BL_128K )
#else
#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#endif

/* PCI memory */
#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)

/* Flash, config addrs, etc */
#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)

#define CFG_DBAT0L	CFG_IBAT0L
#define CFG_DBAT0U	CFG_IBAT0U
#define CFG_DBAT1L	CFG_IBAT1L
#define CFG_DBAT1U	CFG_IBAT1U
#define CFG_DBAT2L	CFG_IBAT2L
#define CFG_DBAT2U	CFG_IBAT2U
#define CFG_DBAT3L	CFG_IBAT3L
#define CFG_DBAT3U	CFG_IBAT3U

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	20	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define CFG_FLASH_CHECKSUM

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
#if defined(CONFIG_CMD_KGDB)
#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM		0x02	/* Software reboot			*/

/* values according to the manual */

#define CONFIG_DRAM_50MHZ	1
#define CONFIG_SDRAM_50MHZ

#define CONFIG_DISK_SPINUP_TIME 1000000


#endif	/* __CONFIG_H */
Commit	Line	Data
8e6f1a8e WD	1	/********************************************************************
	2	*
	3	* Unless otherwise specified, Copyright (C) 2004-2005 Barco Control Rooms
	4	*
	5	* $Source: /home/services/cvs/firmware/ppc/u-boot-1.1.2/include/configs/barco.h,v $
	6	* $Revision: 1.2 $
	7	* $Author: mleeman $
	8	* $Date: 2005/02/21 12:48:58 $
	9	*
	10	* Last ChangeLog Entry
	11	* $Log: barco.h,v $
	12	* Revision 1.2 2005/02/21 12:48:58 mleeman
	13	* update of copyright years (feedback wd)
	14	*
	15	* Revision 1.1 2005/02/14 09:29:25 mleeman
	16	* moved barcohydra.h to barco.h
	17	*
	18	* Revision 1.4 2005/02/09 12:56:23 mleeman
	19	* add generic header to track changes in sources
	20	*
	21	*
	22	*******************************************************************/
	23
	24	/*
	25	* (C) Copyright 2001, 2002
	26	* Wolfgang Denk, DENX Software Engineering, [email protected].
	27	*
	28	* See file CREDITS for list of people who contributed to this
	29	* project.
	30	*
	31	* This program is free software; you can redistribute it and/or
	32	* modify it under the terms of the GNU General Public License as
	33	* published by the Free Software Foundation; either version 2 of
	34	* the License, or (at your option) any later version.
	35	*
	36	* This program is distributed in the hope that it will be useful,
	37	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	38	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	39	* GNU General Public License for more details.
	40	*
	41	* You should have received a copy of the GNU General Public License
	42	* along with this program; if not, write to the Free Software
	43	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	44	* MA 02111-1307 USA
	45	*/
	46
	47	/* ------------------------------------------------------------------------- */
	48
	49	/*
	50	* board/config.h - configuration options, board specific
	51	*/
	52
	53	#ifndef __CONFIG_H
	54	#define __CONFIG_H
	55
	56	/*
	57	* High Level Configuration Options
	58	* (easy to change)
	59	*/
	60
	61	#define CONFIG_MPC824X 1
	62	#define CONFIG_MPC8245 1
	63	#define CONFIG_BARCOBCD_STREAMING 1
	64
65	#undef USE_DINK32
66
67	#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */
68	#define CONFIG_BAUDRATE 9600
69	#define CONFIG_DRAM_SPEED 100 /* MHz */
70
71	#define CONFIG_BOOTARGS "mem=32M"
72
2fd90ce5 JL	73
	74	/*
	75	* BOOTP options
8e6f1a8e	76	*/
2fd90ce5 JL	77	#define CONFIG_BOOTP_SUBNETMASK
	78	#define CONFIG_BOOTP_GATEWAY
	79	#define CONFIG_BOOTP_HOSTNAME
	80	#define CONFIG_BOOTP_BOOTPATH
	81	#define CONFIG_BOOTP_BOOTFILESIZE
	82	#define CONFIG_BOOTP_DNS
	83
8e6f1a8e	84
ba2351f9 JL	85	/*
	86	* Command line configuration.
	87	*/
	88	#include <config_cmd_default.h>
	89
	90	#define CONFIG_CMD_ELF
	91	#define CONFIG_CMD_I2C
	92	#define CONFIG_CMD_EEPROM
	93	#define CONFIG_CMD_PCI
8e6f1a8e	94
80ff4f99 JL	95	#undef CONFIG_CMD_NET
80ff4f99 JL	96
8e6f1a8e WD	97
	98	#define CONFIG_HUSH_PARSER 1 /* use "hush" command parser */
	99	#define CONFIG_BOOTDELAY 1
	100	#define CONFIG_BOOTCOMMAND "boot_default"
	101
	102	/*
	103	* Miscellaneous configurable options
	104	*/
	105	#define CFG_LONGHELP 1 /* undef to save memory */
	106	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	107	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	108	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	109	#define CFG_MAXARGS 16 /* max number of command args */
	110	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	111	#define CFG_LOAD_ADDR 0x00100000 /* default load address */
	112	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	113
	114
	115	/*-----------------------------------------------------------------------
	116	* PCI stuff
	117	*-----------------------------------------------------------------------
	118	*/
	119	#define CONFIG_PCI /* include pci support */
	120	#undef CONFIG_PCI_PNP
8e6f1a8e WD	121
	122	#define PCI_ENET0_IOADDR 0x80000000
	123	#define PCI_ENET0_MEMADDR 0x80000000
	124	#define PCI_ENET1_IOADDR 0x81000000
	125	#define PCI_ENET1_MEMADDR 0x81000000
	126
	127
	128	/*-----------------------------------------------------------------------
	129	* Start addresses for the final memory configuration
	130	* (Set up by the startup code)
	131	* Please note that CFG_SDRAM_BASE _must_ start at 0
	132	*/
	133	#define CFG_SDRAM_BASE 0x00000000
	134	#define CFG_MAX_RAM_SIZE 0x02000000
	135
	136	#define CONFIG_LOGBUFFER
	137	#ifdef CONFIG_LOGBUFFER
	138	#define CFG_STDOUT_ADDR 0x1FFC000
	139	#else
	140	#define CFG_STDOUT_ADDR 0x2B9000
	141	#endif
	142
	143	#define CFG_RESET_ADDRESS 0xFFF00100
	144
	145	#if defined (USE_DINK32)
	146	#define CFG_MONITOR_LEN 0x00030000
	147	#define CFG_MONITOR_BASE 0x00090000
	148	#define CFG_RAMBOOT 1
	149	#define CFG_INIT_RAM_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
	150	#define CFG_INIT_RAM_END 0x10000
	151	#define CFG_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
	152	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	153	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	154	#else
	155	#undef CFG_RAMBOOT
	156	#define CFG_MONITOR_LEN 0x00030000
	157	#define CFG_MONITOR_BASE TEXT_BASE
	158
	159	#define CFG_GBL_DATA_SIZE 128
	160
	161	#define CFG_INIT_RAM_ADDR 0x40000000
	162	#define CFG_INIT_RAM_END 0x1000
	163	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	164
	165	#endif
	166
	167	#define CFG_FLASH_BASE 0xFFF00000
	168	#define CFG_FLASH_SIZE (8 * 1024 * 1024) /* Unity has onboard 1MByte flash */
	169	#define CFG_ENV_IS_IN_FLASH 1
	170	#define CFG_ENV_OFFSET 0x000047A4 /* Offset of Environment Sector */
	171	#define CFG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
f57f70aa	172	/* #define ENV_CRC 0x8BF6F24B XXX - FIXME: gets defined automatically */
8e6f1a8e WD	173
	174	#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
	175
	176	#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
	177	#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
	178
	179	#define CFG_EUMB_ADDR 0xFDF00000
	180
	181	#define CFG_FLASH_RANGE_BASE 0xFFC00000 /* flash memory address range */
	182	#define CFG_FLASH_RANGE_SIZE 0x00400000
	183	#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
	184	#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
	185
	186	/*
	187	* select i2c support configuration
	188	*
	189	* Supported configurations are {none, software, hardware} drivers.
	190	* If the software driver is chosen, there are some additional
	191	* configuration items that the driver uses to drive the port pins.
	192	*/
	193	#define CONFIG_HARD_I2C 1 /* To enable I2C support */
	194	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	195	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	196	#define CFG_I2C_SLAVE 0x7F
	197
	198	#ifdef CONFIG_SOFT_I2C
	199	#error "Soft I2C is not configured properly. Please review!"
	200	#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
	201	#define I2C_ACTIVE (iop->pdir \|= 0x00010000)
	202	#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
	203	#define I2C_READ ((iop->pdat & 0x00010000) != 0)
	204	#define I2C_SDA(bit) if(bit) iop->pdat \|= 0x00010000; \
	205	else iop->pdat &= ~0x00010000
	206	#define I2C_SCL(bit) if(bit) iop->pdat \|= 0x00020000; \
	207	else iop->pdat &= ~0x00020000
	208	#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
	209	#endif /* CONFIG_SOFT_I2C */
	210
	211	#define CFG_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
	212	#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
	213	#define CFG_EEPROM_PAGE_WRITE_BITS 3
	214	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
	215
	216	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	217	#define CFG_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
	218	#define CFG_DBUS_SIZE2 1
	219
	220	/*-----------------------------------------------------------------------
	221	* Definitions for initial stack pointer and data area (in DPRAM)
	222	*/
	223
	224
	225	/*
	226	* NS16550 Configuration (internal DUART)
	227	*/
	228	/*
	229	* Low Level Configuration Settings
	230	* (address mappings, register initial values, etc.)
	231	* You should know what you are doing if you make changes here.
	232	*/
	233
	234	#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
	235
	236	#define CFG_ROMNAL 0x0F /rom/flash next access time /
237	#define CFG_ROMFAL 0x1E /rom/flash access time /
238
239	#define CFG_REFINT 0x8F /* no of clock cycles between CBR refresh cycles */
240
241	/* the following are for SDRAM only*/
242	#define CFG_BSTOPRE 0x25C /* Burst To Precharge, sets open page interval */
243	#define CFG_REFREC 8 /* Refresh to activate interval */
244	#define CFG_RDLAT 4 /* data latency from read command */
245	#define CFG_PRETOACT 3 /* Precharge to activate interval */
246	#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
247	#define CFG_ACTORW 2 /* Activate to R/W */
248	#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
249	#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
250
251	#define CFG_REGISTERD_TYPE_BUFFER 1
252	#define CFG_EXTROM 0
253	#define CFG_REGDIMM 0
254
255
256	/* memory bank settings*/
257	/*
258	* only bits 20-29 are actually used from these vales to set the
259	* start/end address the upper two bits will be 0, and the lower 20
260	* bits will be set to 0x00000 for a start address, or 0xfffff for an
261	* end address
262	*/
263	#define CFG_BANK0_START 0x00000000
264	#define CFG_BANK0_END 0x01FFFFFF
265	#define CFG_BANK0_ENABLE 1
266	#define CFG_BANK1_START 0x02000000
267	#define CFG_BANK1_END 0x02ffffff
268	#define CFG_BANK1_ENABLE 0
269	#define CFG_BANK2_START 0x03f00000
270	#define CFG_BANK2_END 0x03ffffff
271	#define CFG_BANK2_ENABLE 0
272	#define CFG_BANK3_START 0x04000000
273	#define CFG_BANK3_END 0x04ffffff
274	#define CFG_BANK3_ENABLE 0
275	#define CFG_BANK4_START 0x05000000
276	#define CFG_BANK4_END 0x05FFFFFF
277	#define CFG_BANK4_ENABLE 0
278	#define CFG_BANK5_START 0x06000000
279	#define CFG_BANK5_END 0x06FFFFFF
280	#define CFG_BANK5_ENABLE 0
281	#define CFG_BANK6_START 0x07000000
282	#define CFG_BANK6_END 0x07FFFFFF
283	#define CFG_BANK6_ENABLE 0
284	#define CFG_BANK7_START 0x08000000
285	#define CFG_BANK7_END 0x08FFFFFF
286	#define CFG_BANK7_ENABLE 0
287	/*
288	* Memory bank enable bitmask, specifying which of the banks defined above
289	are actually present. MSB is for bank #7, LSB is for bank #0.
290	*/
291	#define CFG_BANK_ENABLE 0x01
292
293	#define CFG_ODCR 0xff /* configures line driver impedances, */
294	/* see 8240 book for bit definitions */
295	#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
296	/* currently accessed page in memory */
297	/* see 8240 book for details */
298
299	/* SDRAM 0 - 256MB */
300	#define CFG_IBAT0L (CFG_SDRAM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
301	#define CFG_IBAT0U (CFG_SDRAM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)
302
303	/* stack in DCACHE @ 1GB (no backing mem) */
304	#if defined(USE_DINK32)
305	#define CFG_IBAT1L (0x40000000 \| BATL_PP_00 )
306	#define CFG_IBAT1U (0x40000000 \| BATU_BL_128K )
307	#else
308	#define CFG_IBAT1L (CFG_INIT_RAM_ADDR \| BATL_PP_10 \| BATL_MEMCOHERENCE)
309	#define CFG_IBAT1U (CFG_INIT_RAM_ADDR \| BATU_BL_128K \| BATU_VS \| BATU_VP)
310	#endif
311
312	/* PCI memory */
313	#define CFG_IBAT2L (0x80000000 \| BATL_PP_10 \| BATL_CACHEINHIBIT)
314	#define CFG_IBAT2U (0x80000000 \| BATU_BL_256M \| BATU_VS \| BATU_VP)
315
316	/* Flash, config addrs, etc */
317	#define CFG_IBAT3L (0xF0000000 \| BATL_PP_10 \| BATL_CACHEINHIBIT)
318	#define CFG_IBAT3U (0xF0000000 \| BATU_BL_256M \| BATU_VS \| BATU_VP)
319
320	#define CFG_DBAT0L CFG_IBAT0L
321	#define CFG_DBAT0U CFG_IBAT0U
322	#define CFG_DBAT1L CFG_IBAT1L
323	#define CFG_DBAT1U CFG_IBAT1U
324	#define CFG_DBAT2L CFG_IBAT2L
325	#define CFG_DBAT2U CFG_IBAT2U
326	#define CFG_DBAT3L CFG_IBAT3L
327	#define CFG_DBAT3U CFG_IBAT3U
328
329	/*
330	* For booting Linux, the board info and command line data
331	* have to be in the first 8 MB of memory, since this is
332	* the maximum mapped by the Linux kernel during initialization.
333	*/
334	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
335	/*-----------------------------------------------------------------------
336	* FLASH organization
337	*/
338	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
339	#define CFG_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
340
341	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
342	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
343
344	#define CFG_FLASH_CHECKSUM
345
346	/*-----------------------------------------------------------------------
347	* Cache Configuration
348	*/
349	#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
ba2351f9	350	#if defined(CONFIG_CMD_KGDB)
8e6f1a8e WD	351	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	352	#endif
	353
	354
	355	/*
	356	* Internal Definitions
	357	*
	358	* Boot Flags
	359	*/
	360	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	361	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	362
	363	/* values according to the manual */
	364
	365	#define CONFIG_DRAM_50MHZ 1
	366	#define CONFIG_SDRAM_50MHZ
	367
	368	#define CONFIG_DISK_SPINUP_TIME 1000000
	369
	370
	371	#endif /* __CONFIG_H */