[J-u-boot.git] / include / configs / dns325.h

/*
 * Copyright (C) 2011
 * Stefan Herbrechtsmeier <[email protected]>
 *
 * Based on Kirkwood support:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <[email protected]>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DNS325_H
#define _CONFIG_DNS325_H

/*
 * Machine number definition
 */
#define CONFIG_MACH_TYPE		MACH_TYPE_DNS325

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Commands configuration
 */
#define CONFIG_SYS_MVFS

#define CONFIG_NR_DRAM_BANKS		1

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* Remove or override few declarations from mv-common.h */

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
#endif

/*
 * RTC driver configuration
 */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif

/*
 * Enable GPI0 support
 */
#define CONFIG_KIRKWOOD_GPIO

/*
 * Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128KB */
#endif

#define CONFIG_ENV_SIZE			0x20000	/* 128KB */
#define CONFIG_ENV_ADDR			0xe0000
#define CONFIG_ENV_OFFSET		0xe0000	/* env starts here */

/*
 * Default environment variables
 */
#define MTDIDS_DEFAULT			"nand0=orion_nand"

#define MTDPARTS_DEFAULT		"mtdparts=orion_nand:" \
	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"stdin=serial\0" \
	"stdout=serial\0" \
	"stderr=serial\0" \
	"loadaddr=0x800000\0" \
	"autoload=no\0" \
	"console=ttyS0,115200\0" \
	"mtdparts="MTDPARTS_DEFAULT \
	"optargs=\0" \
	"bootenv=uEnv.txt\0" \
	"importbootenv=echo Importing environment ...; " \
		"env import -t ${loadaddr} ${filesize}\0" \
	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	"setbootargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"${mtdparts} " \
		"root=${bootenvroot} " \
		"rootfstype=${bootenvrootfstype}\0" \
	"subbootcmd=run setbootargs; " \
		"if run bootenvloadimage; then " \
			"bootm ${loadaddr};" \
		"fi;\0" \
	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	"nandrootfstype=ubifs\0" \
	"nandloadimage=nand read ${loadaddr} kernel\0" \
	"setnandbootenv=echo Booting from nand ...; " \
		"setenv bootenvroot ${nandroot}; " \
		"setenv bootenvrootfstype ${nandrootfstype}; " \
		"setenv bootenvloadimage ${nandloadimage}\0"

#define CONFIG_BOOTCOMMAND \
	"if test -n ${bootenv} && usb start; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment ${bootenv} from usb;" \
			"run importbootenv;" \
		"fi;" \
		"if test -n ${bootenvcmd}; then " \
			"echo Running bootenvcmd ...;" \
			"run bootenvcmd;" \
		"fi;" \
	"fi;" \
	"run setnandbootenv subbootcmd;"

#endif /* _CONFIG_DNS325_H */
Commit	Line	Data
bfacf466 S	1	/*
bfacf466 S	2	* Copyright (C) 2011
16437a19	3	* Stefan Herbrechtsmeier <[email protected]>
bfacf466 S	4	*
	5	* Based on Kirkwood support:
	6	* (C) Copyright 2009
	7	* Marvell Semiconductor <www.marvell.com>
	8	* Written-by: Prafulla Wadaskar <[email protected]>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
bfacf466 S	11	*/
	12
	13	#ifndef _CONFIG_DNS325_H
	14	#define _CONFIG_DNS325_H
	15
	16	/*
	17	* Machine number definition
	18	*/
bfacf466	19	#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
bfacf466 S	20
	21	/*
	22	* High Level Configuration Options (easy to change)
	23	*/
	24	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
bfacf466 S	25	#define CONFIG_KW88F6281 /* SOC Name */
	26	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	27
	28	/*
	29	* Commands configuration
	30	*/
bfacf466 S	31	#define CONFIG_SYS_MVFS
	32
	33	#define CONFIG_NR_DRAM_BANKS 1
	34
	35	/*
	36	* mv-common.h should be defined after CMD configs since it used them
	37	* to enable certain macros
	38	*/
	39	#include "mv-common.h"
	40
	41	/* Remove or override few declarations from mv-common.h */
bfacf466 S	42
	43	/*
	44	* Ethernet Driver configuration
	45	*/
	46	#ifdef CONFIG_CMD_NET
	47	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	48	#define CONFIG_NETCONSOLE
	49	#endif
	50
	51	/*
	52	* SATA Driver configuration
	53	*/
	54	#ifdef CONFIG_MVSATA_IDE
	55	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	56	#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
	57	#endif
	58
	59	/*
	60	* RTC driver configuration
	61	*/
	62	#ifdef CONFIG_CMD_DATE
	63	#define CONFIG_RTC_MV
	64	#endif
	65
	66	/*
	67	* Enable GPI0 support
	68	*/
	69	#define CONFIG_KIRKWOOD_GPIO
	70
bfacf466 S	71	/*
	72	* Environment variables configurations
	73	*/
	74	#ifdef CONFIG_CMD_NAND
bfacf466	75	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
bfacf466 S	76	#endif
	77
	78	#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
	79	#define CONFIG_ENV_ADDR 0xe0000
	80	#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
	81
	82	/*
	83	* Default environment variables
	84	*/
	85	#define MTDIDS_DEFAULT "nand0=orion_nand"
	86
	87	#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
	88	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
	89
	90	#define CONFIG_EXTRA_ENV_SETTINGS \
	91	"stdin=serial\0" \
	92	"stdout=serial\0" \
	93	"stderr=serial\0" \
	94	"loadaddr=0x800000\0" \
	95	"autoload=no\0" \
	96	"console=ttyS0,115200\0" \
	97	"mtdparts="MTDPARTS_DEFAULT \
	98	"optargs=\0" \
	99	"bootenv=uEnv.txt\0" \
	100	"importbootenv=echo Importing environment ...; " \
	101	"env import -t ${loadaddr} ${filesize}\0" \
	102	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	103	"setbootargs=setenv bootargs console=${console} " \
	104	"${optargs} " \
	105	"${mtdparts} " \
	106	"root=${bootenvroot} " \
	107	"rootfstype=${bootenvrootfstype}\0" \
	108	"subbootcmd=run setbootargs; " \
	109	"if run bootenvloadimage; then " \
	110	"bootm ${loadaddr};" \
	111	"fi;\0" \
	112	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	113	"nandrootfstype=ubifs\0" \
	114	"nandloadimage=nand read ${loadaddr} kernel\0" \
	115	"setnandbootenv=echo Booting from nand ...; " \
	116	"setenv bootenvroot ${nandroot}; " \
	117	"setenv bootenvrootfstype ${nandrootfstype}; " \
	118	"setenv bootenvloadimage ${nandloadimage}\0"
	119
	120	#define CONFIG_BOOTCOMMAND \
	121	"if test -n ${bootenv} && usb start; then " \
	122	"if run loadbootenv; then " \
	123	"echo Loaded environment ${bootenv} from usb;" \
	124	"run importbootenv;" \
	125	"fi;" \
	126	"if test -n ${bootenvcmd}; then " \
	127	"echo Running bootenvcmd ...;" \
	128	"run bootenvcmd;" \
	129	"fi;" \
	130	"fi;" \
	131	"run setnandbootenv subbootcmd;"
	132
	133	#endif /* _CONFIG_DNS325_H */