spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...

[J-u-boot.git] / configs / etamin_defconfig

CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TEXT_BASE=0x80100000
CONFIG_SYS_MALLOC_LEN=0x1000000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x980000
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
CONFIG_AM33XX=y
CONFIG_SYS_MPUCLK=300
CONFIG_TARGET_ETAMIN=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0xB80000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
CONFIG_BOOT_RETRY=y
CONFIG_BOOT_RETRY_TIME=60
CONFIG_RESET_TO_RETRY=y
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_BSS_START_ADDR=0x80000000
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000
CONFIG_SPL_I2C=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
CONFIG_SPL_WATCHDOG=y
CONFIG_SPL_YMODEM_SUPPORT=y
# CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_PBSIZE=1049
CONFIG_CMD_ASKENV=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_DNS2=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand2=omap2-nand_concat"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand_concat:512k(spl),512k(spl.backup1),512k(spl.backup2),512k(spl.backup3),7680k(u-boot),2048k(u-boot.env0),2048k(u-boot.env1),2048k(mtdoops),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_ENV_RANGE=0x200000
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_USE_ROOTPATH=y
CONFIG_ROOTPATH="/opt/eldk"
CONFIG_SPL_DM=y
# CONFIG_SPL_BLK is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
# CONFIG_SPL_DM_MMC is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_MAX_NAND_DEVICE=3
CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x80000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x80
CONFIG_SYS_NAND_PAGE_SIZE=0x1000
CONFIG_SYS_NAND_OOBSIZE=0xe0
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x200000
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
CONFIG_PHY_SMSC=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
CONFIG_USB_GADGET_VENDOR_NUM=0x0908
CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_ETHER=y