[J-u-boot.git] / include / configs / mx7dsabresd.h

/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX7D SABRESD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MX7D_SABRESD_CONFIG_H
#define __MX7D_SABRESD_CONFIG_H

#include "mx7_common.h"

#define CONFIG_DBG_MONITOR
#define PHYS_SDRAM_SIZE			SZ_1G

/* Network */
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_XCV_TYPE             RGMII
#define CONFIG_ETHPRIME                 "FEC"
#define CONFIG_FEC_MXC_PHYADDR          0

#define CONFIG_PHYLIB
#define CONFIG_PHY_BROADCOM
#define CONFIG_FEC_DMA_MINALIGN		64
/* ENET1 */
#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR

/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR       0

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08

#undef CONFIG_BOOTM_NETBSD
#undef CONFIG_BOOTM_PLAN9
#undef CONFIG_BOOTM_RTEMS

#undef CONFIG_CMD_EXPORTENV
#undef CONFIG_CMD_IMPORTENV

/* I2C configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_SPEED		100000

#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_MFG_ENV_SETTINGS \
	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
		"rdinit=/linuxrc " \
		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
		"g_mass_storage.iSerialNumber=\"\" "\
		"clk_ignore_unused "\
		"\0" \
	"initrd_addr=0x83800000\0" \
	"initrd_high=0xffffffff\0" \
	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \

#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_MFG_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx7d-sdb.dtb\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_SYS_FSL_USDHC_NUM	2

#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */

#define CONFIG_CMD_BMODE

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX7
#define CONFIG_USB_STORAGE
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS   0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2

#define CONFIG_IMX_THERMAL

#endif	/* __CONFIG_H */
Commit	Line	Data
1a8150d4 AA	1	/*
	2	* Copyright (C) 2015 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX7D SABRESD board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __MX7D_SABRESD_CONFIG_H
	10	#define __MX7D_SABRESD_CONFIG_H
	11
	12	#include "mx7_common.h"
	13
	14	#define CONFIG_DBG_MONITOR
	15	#define PHYS_SDRAM_SIZE SZ_1G
	16
	17	/* Network */
	18	#define CONFIG_CMD_MII
	19	#define CONFIG_FEC_MXC
	20	#define CONFIG_MII
	21	#define CONFIG_FEC_XCV_TYPE RGMII
	22	#define CONFIG_ETHPRIME "FEC"
	23	#define CONFIG_FEC_MXC_PHYADDR 0
	24
	25	#define CONFIG_PHYLIB
	26	#define CONFIG_PHY_BROADCOM
	27	#define CONFIG_FEC_DMA_MINALIGN 64
	28	/* ENET1 */
	29	#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
	30
	31	/* MMC Config*/
	32	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	33
	34	/* PMIC */
	35	#define CONFIG_POWER
	36	#define CONFIG_POWER_I2C
	37	#define CONFIG_POWER_PFUZE3000
	38	#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
	39
	40	#undef CONFIG_BOOTM_NETBSD
	41	#undef CONFIG_BOOTM_PLAN9
	42	#undef CONFIG_BOOTM_RTEMS
	43
	44	#undef CONFIG_CMD_EXPORTENV
	45	#undef CONFIG_CMD_IMPORTENV
	46
	47	/* I2C configs */
	48	#define CONFIG_CMD_I2C
	49	#define CONFIG_SYS_I2C
	50	#define CONFIG_SYS_I2C_MXC
	51	#define CONFIG_SYS_I2C_MXC_I2C1
	52	#define CONFIG_SYS_I2C_SPEED 100000
	53
	54	#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
	55	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	56
	57	#define CONFIG_MFG_ENV_SETTINGS \
	58	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
	59	"rdinit=/linuxrc " \
	60	"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
	61	"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
	62	"g_mass_storage.iSerialNumber=\"\" "\
	63	"clk_ignore_unused "\
	64	"\0" \
65	"initrd_addr=0x83800000\0" \
66	"initrd_high=0xffffffff\0" \
67	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
68
69	#define CONFIG_EXTRA_ENV_SETTINGS \
70	CONFIG_MFG_ENV_SETTINGS \
71	"script=boot.scr\0" \
72	"image=zImage\0" \
73	"console=ttymxc0\0" \
74	"fdt_high=0xffffffff\0" \
75	"initrd_high=0xffffffff\0" \
76	"fdt_file=imx7d-sdb.dtb\0" \
77	"fdt_addr=0x83000000\0" \
78	"boot_fdt=try\0" \
79	"ip_dyn=yes\0" \
80	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
81	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
82	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
83	"mmcautodetect=yes\0" \
84	"mmcargs=setenv bootargs console=${console},${baudrate} " \
85	"root=${mmcroot}\0" \
86	"loadbootscript=" \
87	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
88	"bootscript=echo Running bootscript from mmc ...; " \
89	"source\0" \
90	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
91	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
92	"mmcboot=echo Booting from mmc ...; " \
93	"run mmcargs; " \
94	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
95	"if run loadfdt; then " \
96	"bootz ${loadaddr} - ${fdt_addr}; " \
97	"else " \
98	"if test ${boot_fdt} = try; then " \
99	"bootz; " \
100	"else " \
101	"echo WARN: Cannot load the DT; " \
102	"fi; " \
103	"fi; " \
104	"else " \
105	"bootz; " \
106	"fi;\0" \
107	"netargs=setenv bootargs console=${console},${baudrate} " \
108	"root=/dev/nfs " \
109	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
110	"netboot=echo Booting from net ...; " \
111	"run netargs; " \
112	"if test ${ip_dyn} = yes; then " \
113	"setenv get_cmd dhcp; " \
114	"else " \
115	"setenv get_cmd tftp; " \
116	"fi; " \
117	"${get_cmd} ${image}; " \
118	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
119	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
120	"bootz ${loadaddr} - ${fdt_addr}; " \
121	"else " \
122	"if test ${boot_fdt} = try; then " \
123	"bootz; " \
124	"else " \
125	"echo WARN: Cannot load the DT; " \
126	"fi; " \
127	"fi; " \
128	"else " \
129	"bootz; " \
130	"fi;\0"
131
132	#define CONFIG_BOOTCOMMAND \
133	"mmc dev ${mmcdev};" \
134	"mmc dev ${mmcdev}; if mmc rescan; then " \
135	"if run loadbootscript; then " \
136	"run bootscript; " \
137	"else " \
138	"if run loadimage; then " \
139	"run mmcboot; " \
140	"else run netboot; " \
141	"fi; " \
142	"fi; " \
143	"else run netboot; fi"
144
145	#define CONFIG_CMD_MEMTEST
146	#define CONFIG_SYS_MEMTEST_START 0x80000000
147	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
148
149	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
150	#define CONFIG_SYS_HZ 1000
151
152	#define CONFIG_STACKSIZE SZ_128K
153
154	/* Physical Memory Map */
155	#define CONFIG_NR_DRAM_BANKS 1
156	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
157
158	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
159	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
160	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
161
162	#define CONFIG_SYS_INIT_SP_OFFSET \
163	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
164	#define CONFIG_SYS_INIT_SP_ADDR \
165	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
166
167	/* FLASH and environment organization */
168	#define CONFIG_SYS_NO_FLASH
169	#define CONFIG_ENV_SIZE SZ_8K
170	#define CONFIG_ENV_IS_IN_MMC
171	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
172	#define CONFIG_SYS_FSL_USDHC_NUM 2
173
174	#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
175	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
176	#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
177
178	#define CONFIG_CMD_BMODE
179
180	/* USB Configs */
181	#define CONFIG_CMD_USB
182	#define CONFIG_USB_EHCI
183	#define CONFIG_USB_EHCI_MX7
184	#define CONFIG_USB_STORAGE
185	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
186	#define CONFIG_USB_HOST_ETHER
187	#define CONFIG_USB_ETHER_ASIX
188	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
189	#define CONFIG_MXC_USB_FLAGS 0
190	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
191
192	#define CONFIG_IMX_THERMAL
193
194	#endif /* __CONFIG_H */