[J-u-boot.git] / include / configs / munices.h

/*
 * (C) Copyright 2007
 * Heiko Schocher, DENX Software Engineering, [email protected].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H
/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
#define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
#define CONFIG_MUNICES		1	/* ... on MUNICes board */
#define CONFIG_SYS_MPC5XXX_CLKIN	33333333 /* ... running at 33.333333MHz */
#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
#define CONFIG_HIGH_BATS	1	/* High BATs supported */

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO

#if defined(CONFIG_CMD_KGDB)
#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

#define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
#define CONFIG_BOOTDELAY	5   /* autoboot after 5 seconds */
#undef	CONFIG_BOOTARGS

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run net_nfs\" to load Kernel over TFTP and to mount root filesystem over NFS;" \
	"echo"

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=$(serverip):$(rootpath)\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs $(bootargs) "				\
		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
		":$(hostname):$(netdev):off panic=5\0"			\
	"flash_nfs=run nfsargs addip;"					\
		"bootm $(kernel_addr)\0"				\
	"flash_self=run ramargs addip;"					\
		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
	"rootpath=/opt/eldk/ppc_6xx\0"					\
	"bootfile=/tftpboot/munices/u-boot.bin\0"			\
	"update=tftpboot 200000 ${bootfile};protect off fff00000 fff3ffff;" \
	"erase fff00000 fff3ffff; cp.b 200000 FFF00000 ${filesize}\0"	\
	""
#define CONFIG_BOOTCOMMAND	"run net_nfs"

/*
 * IPB Bus clocking configuration.
 */
#define  CONFIG_SYS_IPBSPEED_133		/* define for 133MHz speed */
#if defined(CONFIG_SYS_IPBSPEED_133)
/*
 * PCI Bus clocking configuration
 *
 * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
 * CONFIG_SYS_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
 * been tested with a IPB Bus Clock of 66 MHz.
 */
#define CONFIG_SYS_PCISPEED_66		/* define for 66MHz speed */
#else
#undef CONFIG_SYS_PCISPEED_66			/* for 33MHz speed */
#endif

/*
 * Memory map
 */
#define CONFIG_SYS_MBAR		0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config  */

#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
#define CONFIG_SYS_SDRAM_BASE		0x00000000
/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#   define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*
 * Flash configuration
 */
#define CONFIG_SYS_FLASH_BASE		0xFF000000
#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_SIZE		0x01000000 /* 16 MByte */
#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	 /* max num of flash banks (= chip selects) */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */

/*
 * Chip selects configuration
 */
/* Boot Chipselect */
#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_BOOTCS_CFG		0x00047800

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_OFFSET		0x40000
#define CONFIG_ENV_ADDR		(TEXT_BASE + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SECT_SIZE	0x20000
#define CONFIG_ENV_SIZE		0x4000
#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_ADDR_REDUND	(TEXT_BASE + CONFIG_ENV_OFFSET_REDUND)
#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
#define CONFIG_ENV_OVERWRITE	1

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC	1
#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR		0x01
#define CONFIG_MII		1

/*
 * GPIO configuration
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0x00058044 /* PSC1=UART, PSC2=UART ; Ether=100MBit with MD
						no PCI */

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */

#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_CMDLINE_EDITING  1

/*
 * Various low-level settings
 */
#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE

#define CONFIG_SYS_CS_BURST		0x00000000
#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
#define CONFIG_SYS_RESET_ADDRESS	0xff000000

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT	1
#define CONFIG_OF_BOARD_SETUP	1

#define OF_CPU			"PowerPC,5200@0"
#define OF_TBCLK		(bd->bi_busfreq / 4)
#define OF_SOC                  "soc5200@f0000000"
#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"

#endif /* __CONFIG_H */
Commit	Line	Data
5fb2b234 HS	1	/*
	2	* (C) Copyright 2007
	3	* Heiko Schocher, DENX Software Engineering, [email protected].
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	#ifndef __CONFIG_H
	25	#define __CONFIG_H
	26	/*
	27	* High Level Configuration Options
	28	* (easy to change)
	29	*/
	30	#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
	31	#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
	32	#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */
	33	#define CONFIG_MUNICES 1 /* ... on MUNICes board */
6d0f6bcf	34	#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
5fb2b234 HS	35	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
5fb2b234 HS	36	#define BOOTFLAG_WARM 0x02 /* Software reboot */
6d0f6bcf	37	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
31d82672	38	#define CONFIG_HIGH_BATS 1 /* High BATs supported */
5fb2b234 HS	39
	40	/*
	41	* Command line configuration.
	42	*/
	43	#include <config_cmd_default.h>
	44
	45	#define CONFIG_CMD_ASKENV
	46	#define CONFIG_CMD_ELF
	47	#define CONFIG_CMD_IMMAP
	48	#define CONFIG_CMD_NET
	49	#define CONFIG_CMD_PING
	50	#define CONFIG_CMD_REGINFO
	51
1b769881	52	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	53	# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
5fb2b234 HS	54	#endif
	55
	56	/*
	57	* Serial console configuration
	58	*/
	59	#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
	60	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
6d0f6bcf	61	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
5fb2b234 HS	62
	63	#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
	64	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	65	#undef CONFIG_BOOTARGS
	66
	67	#define CONFIG_PREBOOT "echo;" \
	68	"echo Type \"run net_nfs\" to load Kernel over TFTP and to mount root filesystem over NFS;" \
	69	"echo"
	70
	71	#define CONFIG_EXTRA_ENV_SETTINGS \
	72	"netdev=eth0\0" \
	73	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	74	"nfsroot=$(serverip):$(rootpath)\0" \
	75	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	76	"addip=setenv bootargs $(bootargs) " \
	77	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
	78	":$(hostname):$(netdev):off panic=5\0" \
	79	"flash_nfs=run nfsargs addip;" \
	80	"bootm $(kernel_addr)\0" \
	81	"flash_self=run ramargs addip;" \
	82	"bootm $(kernel_addr) $(ramdisk_addr)\0" \
	83	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
	84	"rootpath=/opt/eldk/ppc_6xx\0" \
	85	"bootfile=/tftpboot/munices/u-boot.bin\0" \
	86	"update=tftpboot 200000 ${bootfile};protect off fff00000 fff3ffff;" \
	87	"erase fff00000 fff3ffff; cp.b 200000 FFF00000 ${filesize}\0" \
	88	""
	89	#define CONFIG_BOOTCOMMAND "run net_nfs"
	90
	91	/*
	92	* IPB Bus clocking configuration.
	93	*/
6d0f6bcf JCPV	94	#define CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */
6d0f6bcf JCPV	95	#if defined(CONFIG_SYS_IPBSPEED_133)
5fb2b234 HS	96	/*
	97	* PCI Bus clocking configuration
	98	*
	99	* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
6d0f6bcf	100	* CONFIG_SYS_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
5fb2b234 HS	101	* been tested with a IPB Bus Clock of 66 MHz.
5fb2b234 HS	102	*/
6d0f6bcf	103	#define CONFIG_SYS_PCISPEED_66 /* define for 66MHz speed */
5fb2b234	104	#else
6d0f6bcf	105	#undef CONFIG_SYS_PCISPEED_66 /* for 33MHz speed */
5fb2b234 HS	106	#endif
	107
	108	/*
	109	* Memory map
	110	*/
6d0f6bcf	111	#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config */
fa05664c	112
6d0f6bcf JCPV	113	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
6d0f6bcf JCPV	114	#define CONFIG_SYS_SDRAM_BASE 0x00000000
5fb2b234	115	/* Use SRAM until RAM will be available */
6d0f6bcf JCPV	116	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
	117	#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
	118	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	119	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	120	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	121
	122	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	123	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	124	# define CONFIG_SYS_RAMBOOT 1
5fb2b234 HS	125	#endif
5fb2b234 HS	126
6d0f6bcf JCPV	127	#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	128	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	129	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
5fb2b234 HS	130
	131	/*
	132	* Flash configuration
	133	*/
6d0f6bcf JCPV	134	#define CONFIG_SYS_FLASH_BASE 0xFF000000
6d0f6bcf JCPV	135	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
00b1883a	136	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
6d0f6bcf JCPV	137	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	138	#define CONFIG_SYS_FLASH_EMPTY_INFO
	139	#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* 16 MByte */
	140	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
	141	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */
	142	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
5fb2b234 HS	143
	144	/*
	145	* Chip selects configuration
	146	*/
	147	/* Boot Chipselect */
6d0f6bcf JCPV	148	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	149	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	150	#define CONFIG_SYS_BOOTCS_CFG 0x00047800
5fb2b234 HS	151
	152	/*
	153	* Environment settings
	154	*/
5a1aceb0	155	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	156	#define CONFIG_ENV_OFFSET 0x40000
	157	#define CONFIG_ENV_ADDR (TEXT_BASE + CONFIG_ENV_OFFSET)
	158	#define CONFIG_ENV_SECT_SIZE 0x20000
	159	#define CONFIG_ENV_SIZE 0x4000
	160	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
	161	#define CONFIG_ENV_ADDR_REDUND (TEXT_BASE + CONFIG_ENV_OFFSET_REDUND)
	162	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
5fb2b234 HS	163	#define CONFIG_ENV_OVERWRITE 1
	164
	165	/*
	166	* Ethernet configuration
	167	*/
	168	#define CONFIG_MPC5xxx_FEC 1
86321fc1	169	#define CONFIG_MPC5xxx_FEC_MII100
5fb2b234 HS	170	#define CONFIG_PHY_ADDR 0x01
	171	#define CONFIG_MII 1
	172
	173	/*
	174	* GPIO configuration
	175	*/
6d0f6bcf	176	#define CONFIG_SYS_GPS_PORT_CONFIG 0x00058044 /* PSC1=UART, PSC2=UART ; Ether=100MBit with MD
5fb2b234 HS	177	no PCI */
	178
	179	/*
	180	* Miscellaneous configurable options
	181	*/
6d0f6bcf JCPV	182	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	183	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	184	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	185	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	186	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	187	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
5fb2b234	188
6d0f6bcf JCPV	189	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
6d0f6bcf JCPV	190	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
5fb2b234	191
6d0f6bcf JCPV	192	#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
6d0f6bcf JCPV	193	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
5fb2b234 HS	194
	195	#define CONFIG_DISPLAY_BOARDINFO 1
	196	#define CONFIG_CMDLINE_EDITING 1
	197
	198	/*
	199	* Various low-level settings
	200	*/
6d0f6bcf JCPV	201	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
6d0f6bcf JCPV	202	#define CONFIG_SYS_HID0_FINAL HID0_ICE
5fb2b234	203
6d0f6bcf JCPV	204	#define CONFIG_SYS_CS_BURST 0x00000000
	205	#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
	206	#define CONFIG_SYS_RESET_ADDRESS 0xff000000
5fb2b234 HS	207
	208	/* pass open firmware flat tree */
	209	#define CONFIG_OF_LIBFDT 1
	210	#define CONFIG_OF_BOARD_SETUP 1
	211
	212	#define OF_CPU "PowerPC,5200@0"
	213	#define OF_TBCLK (bd->bi_busfreq / 4)
	214	#define OF_SOC "soc5200@f0000000"
	215	#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
	216
	217	#endif /* __CONFIG_H */