[J-u-boot.git] / include / configs / meesc.h

/*
 * (C) Copyright 2007-2008
 * Stelian Pop <[email protected]>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * (C) Copyright 2009
 * Daniel Gorsulowski <[email protected]>
 * esd electronic system design gmbh <www.esd.eu>
 *
 * Configuation settings for the esd MEESC board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* Common stuff */
#define CONFIG_SYS_HZ			1000	/* decrementer freq */
#define CONFIG_MEESC			1	/* Board is esd MEESC */
#define CONFIG_ARM926EJS		1	/* This is an ARM926EJS Core */
#define CONFIG_AT91SAM9263		1	/* It's an AT91SAM9263 SoC */
#define CONFIG_ENV_OVERWRITE		1	/* necessary on prototypes */
#define CONFIG_DISPLAY_BOARDINFO	1
#define CONFIG_DISPLAY_CPUINFO		1	/* display cpu info and speed */
#define CONFIG_PREBOOT				/* enable preboot variable */
#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1
#undef CONFIG_USE_IRQ				/* don't need IRQ/FIQ stuff */

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SKIP_RELOCATE_UBOOT

#define CONFIG_ARCH_CPU_INIT

/*
 * Hardware drivers
 */

/* Console output */
#define CONFIG_ATMEL_USART			1
#undef CONFIG_USART0
#undef CONFIG_USART1
#undef CONFIG_USART2
#define CONFIG_USART3				1	/* USART 3 is DBGU */

#define CONFIG_BOOTDELAY			3
#define CONFIG_ZERO_BOOTDELAY_CHECK		1

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE		1
#define CONFIG_BOOTP_BOOTPATH			1
#define CONFIG_BOOTP_GATEWAY			1
#define CONFIG_BOOTP_HOSTNAME			1

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_USB

#define CONFIG_CMD_PING				1
#define CONFIG_CMD_DHCP				1
#define CONFIG_CMD_NAND				1

/* LED */
#define CONFIG_AT91_LED				1

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS			1
#define PHYS_SDRAM				0x20000000

/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH			1
#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
#define AT91_SPI_CLK				15000000
#define DATAFLASH_TCSS				(0x1a << 16)
#define DATAFLASH_TCHS				(0x1 << 24)

/* NOR flash is not populated, disable it */
#define CONFIG_SYS_NO_FLASH			1

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			0x40000000
#define CONFIG_SYS_NAND_DBW_8			1
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
#endif

/* Ethernet */
#define CONFIG_MACB				1
#define CONFIG_RMII				1
#define CONFIG_NET_MULTI			1
#define CONFIG_NET_RETRY_COUNT			20
#undef CONFIG_RESET_PHY_R

#define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */

#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END			0x21e00000

#define CONFIG_SYS_USE_DATAFLASH		1
#undef CONFIG_SYS_USE_NANDFLASH

#ifdef CONFIG_SYS_USE_DATAFLASH

/* CAN */
#define CONFIG_AT91_CAN				1

/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_ENV_IS_IN_DATAFLASH	1
#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
					0x8400)
#define CONFIG_ENV_OFFSET		0x4200
#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
					CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE			0x4200
#define CONFIG_BOOTCOMMAND		"cp.b C0042000 22000000 210000; bootm"

#else /* CONFIG_SYS_USE_NANDFLASH */

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND	1
#define CONFIG_ENV_OFFSET		0x60000
#define CONFIG_ENV_OFFSET_REDUND	0x80000
#define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND		"nand read 22000000 A0000 200000; bootm"

#endif

#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }

#define CONFIG_SYS_PROMPT		"=> "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP		1
#define CONFIG_CMDLINE_EDITING		1

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		0x2D000
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */

#define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */

#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
#endif

#endif
Commit	Line	Data
33b1d3f4 DG	1	/*
	2	* (C) Copyright 2007-2008
	3	* Stelian Pop <[email protected]>
	4	* Lead Tech Design <www.leadtechdesign.com>
	5	*
	6	* (C) Copyright 2009
	7	* Daniel Gorsulowski <[email protected]>
	8	* esd electronic system design gmbh <www.esd.eu>
	9	*
	10	* Configuation settings for the esd MEESC board.
	11	*
	12	* See file CREDITS for list of people who contributed to this
	13	* project.
	14	*
	15	* This program is free software; you can redistribute it and/or
	16	* modify it under the terms of the GNU General Public License as
	17	* published by the Free Software Foundation; either version 2 of
	18	* the License, or (at your option) any later version.
	19	*
	20	* This program is distributed in the hope that it will be useful,
	21	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	22	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	23	* GNU General Public License for more details.
	24	*
	25	* You should have received a copy of the GNU General Public License
	26	* along with this program; if not, write to the Free Software
	27	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	28	* MA 02111-1307 USA
	29	*/
	30
	31	#ifndef __CONFIG_H
	32	#define __CONFIG_H
	33
	34	/* Common stuff */
	35	#define CONFIG_SYS_HZ 1000 /* decrementer freq */
	36	#define CONFIG_MEESC 1 /* Board is esd MEESC */
	37	#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
	38	#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
	39	#define CONFIG_ENV_OVERWRITE 1 /* necessary on prototypes */
	40	#define CONFIG_DISPLAY_BOARDINFO 1
	41	#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
	42	#define CONFIG_PREBOOT /* enable preboot variable */
	43	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	44	#define CONFIG_SETUP_MEMORY_TAGS 1
	45	#define CONFIG_INITRD_TAG 1
	46	#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
	47
	48	#define CONFIG_SKIP_LOWLEVEL_INIT
	49	#define CONFIG_SKIP_RELOCATE_UBOOT
	50
	51	#define CONFIG_ARCH_CPU_INIT
	52
	53	/*
	54	* Hardware drivers
	55	*/
	56
	57	/* Console output */
	58	#define CONFIG_ATMEL_USART 1
	59	#undef CONFIG_USART0
	60	#undef CONFIG_USART1
	61	#undef CONFIG_USART2
	62	#define CONFIG_USART3 1 /* USART 3 is DBGU */
	63
	64	#define CONFIG_BOOTDELAY 3
65	#define CONFIG_ZERO_BOOTDELAY_CHECK 1
66
67	/*
68	* BOOTP options
69	*/
70	#define CONFIG_BOOTP_BOOTFILESIZE 1
71	#define CONFIG_BOOTP_BOOTPATH 1
72	#define CONFIG_BOOTP_GATEWAY 1
73	#define CONFIG_BOOTP_HOSTNAME 1
74
75	/*
76	* Command line configuration.
77	*/
78	#include <config_cmd_default.h>
79	#undef CONFIG_CMD_BDI
80	#undef CONFIG_CMD_AUTOSCRIPT
81	#undef CONFIG_CMD_FPGA
82	#undef CONFIG_CMD_LOADS
83	#undef CONFIG_CMD_IMLS
84	#undef CONFIG_CMD_USB
85
86	#define CONFIG_CMD_PING 1
87	#define CONFIG_CMD_DHCP 1
88	#define CONFIG_CMD_NAND 1
89
90	/* LED */
91	#define CONFIG_AT91_LED 1
92
93	/* SDRAM */
94	#define CONFIG_NR_DRAM_BANKS 1
95	#define PHYS_SDRAM 0x20000000
96
97	/* DataFlash */
98	#define CONFIG_ATMEL_DATAFLASH_SPI
99	#define CONFIG_HAS_DATAFLASH 1
100	#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
101	#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
102	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
103	#define AT91_SPI_CLK 15000000
104	#define DATAFLASH_TCSS (0x1a << 16)
105	#define DATAFLASH_TCHS (0x1 << 24)
106
107	/* NOR flash is not populated, disable it */
108	#define CONFIG_SYS_NO_FLASH 1
109
110	/* NAND flash */
111	#ifdef CONFIG_CMD_NAND
112	#define CONFIG_NAND_ATMEL
113	#define CONFIG_SYS_MAX_NAND_DEVICE 1
114	#define CONFIG_SYS_NAND_BASE 0x40000000
115	#define CONFIG_SYS_NAND_DBW_8 1
116	/* our ALE is AD21 */
117	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
118	/* our CLE is AD22 */
119	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
120	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
121	#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
122	#endif
123
124	/* Ethernet */
125	#define CONFIG_MACB 1
126	#define CONFIG_RMII 1
127	#define CONFIG_NET_MULTI 1
128	#define CONFIG_NET_RETRY_COUNT 20
129	#undef CONFIG_RESET_PHY_R
130
131	#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
132
133	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
134	#define CONFIG_SYS_MEMTEST_END 0x21e00000
135
136	#define CONFIG_SYS_USE_DATAFLASH 1
137	#undef CONFIG_SYS_USE_NANDFLASH
138
139	#ifdef CONFIG_SYS_USE_DATAFLASH
140
141	/* CAN */
142	#define CONFIG_AT91_CAN 1
143
144	/* bootstrap + u-boot + env + linux in dataflash on CS0 */
145	#define CONFIG_ENV_IS_IN_DATAFLASH 1
146	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
147	0x8400)
148	#define CONFIG_ENV_OFFSET 0x4200
149	#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
150	CONFIG_ENV_OFFSET)
151	#define CONFIG_ENV_SIZE 0x4200
152	#define CONFIG_BOOTCOMMAND "cp.b C0042000 22000000 210000; bootm"
153
154	#else /* CONFIG_SYS_USE_NANDFLASH */
155
156	/* bootstrap + u-boot + env + linux in nandflash */
157	#define CONFIG_ENV_IS_IN_NAND 1
158	#define CONFIG_ENV_OFFSET 0x60000
159	#define CONFIG_ENV_OFFSET_REDUND 0x80000
160	#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
161	#define CONFIG_BOOTCOMMAND "nand read 22000000 A0000 200000; bootm"
162
163	#endif
164
165	#define CONFIG_BAUDRATE 115200
166	#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
167
168	#define CONFIG_SYS_PROMPT "=> "
169	#define CONFIG_SYS_CBSIZE 256
170	#define CONFIG_SYS_MAXARGS 16
171	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
172	sizeof(CONFIG_SYS_PROMPT) + 16)
173	#define CONFIG_SYS_LONGHELP 1
174	#define CONFIG_CMDLINE_EDITING 1
175
176	/*
177	* Size of malloc() pool
178	*/
179	#define CONFIG_SYS_MALLOC_LEN 0x2D000
180	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
181
182	#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
183
184	#ifdef CONFIG_USE_IRQ
185	#error CONFIG_USE_IRQ not supported
186	#endif
187
188	#endif