[J-u-boot.git] / include / configs / edminiv2.h

/*
 * Copyright (C) 2010 Albert ARIBAUD <[email protected]>
 *
 * Based on original Kirkwood support which is
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <[email protected]>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301 USA
 */

#ifndef _CONFIG_EDMINIV2_H
#define _CONFIG_EDMINIV2_H

/*
 * Version number information
 */

#define CONFIG_IDENT_STRING	" EDMiniV2"

/*
 * High Level Configuration Options (easy to change)
 */

#define CONFIG_MARVELL		1
#define CONFIG_ARM926EJS	1	/* Basic Architecture */
#define CONFIG_FEROCEON		1	/* CPU Core subversion */
#define CONFIG_ORION5X		1	/* SOC Family Name */
#define CONFIG_88F5182		1	/* SOC Name */
#define CONFIG_MACH_EDMINIV2	1	/* Machine type */

#include <asm/arch/orion5x.h>
/*
 * CLKs configurations
 */

#define CONFIG_SYS_HZ		1000

/*
 * Board-specific values for Orion5x MPP low level init:
 * - MPPs 12 to 15 are SATA LEDs (mode 5)
 * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for
 *   MPP16 to MPP19, mode 0 for others
 */

#define ORION5X_MPP0_7		0x00000003
#define ORION5X_MPP8_15		0x55550000
#define ORION5X_MPP16_23	0x00005555

/*
 * Board-specific values for Orion5x GPIO low level init:
 * - GPIO3 is input (RTC interrupt)
 * - GPIO16 is Power LED control (0 = on, 1 = off)
 * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
 * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
 * - Last GPIO is 26, further bits are supposed to be 0.
 * Enable mask has ones for INPUT, 0 for OUTPUT.
 * Default is LED ON.
 */

#define ORION5X_GPIO_OUT_ENABLE	0x03fcffff
#define ORION5X_GPIO_OUT_VALUE	0x03fcffff

/*
 * NS16550 Configuration
 */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
#define CONFIG_SYS_NS16550_COM1		ORION5X_UART0_BASE

/*
 * Serial Port configuration
 * The following definitions let you select what serial you want to use
 * for your console driver.
 */

#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }

/*
 * FLASH configuration
 */

#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_FLASH_CFI_LEGACY
#define CONFIG_SYS_MAX_FLASH_BANKS	1  /* max num of flash banks       */
#define CONFIG_SYS_MAX_FLASH_SECT	11 /* max num of sects on one chip */
#define CONFIG_SYS_FLASH_BASE		0xfff80000
#define CONFIG_SYS_FLASH_SECTSZ \
	{16384, 8192, 8192, 32768, \
	 65536, 65536, 65536, 65536, 65536, 65536, 65536}

/* auto boot */
#define CONFIG_BOOTDELAY	3	/* default enable autoboot */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */

#define	CONFIG_SYS_PROMPT	"EDMiniV2> "	/* Command Prompt */
#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
/*
 * Commands configuration - using default command set for now
 */
#include <config_cmd_default.h>
#define CONFIG_CMD_IDE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_USB

/*
 * Network
 */

#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE				/* Enable Marvell GbE Driver */
#define CONFIG_MVGBE_PORTS	{1}		/* enable port 0 only */
#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION	/* don't randomize MAC */
#define CONFIG_PHY_BASE_ADR	0x8
#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
#define CONFIG_NETCONSOLE	/* include NetConsole support   */
#define	CONFIG_MII		/* expose smi ove miiphy interface */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
#endif

/*
 * IDE
 */
#ifdef CONFIG_CMD_IDE
#define __io
#define CONFIG_IDE_PREINIT
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_EXT2
/* ED Mini V has an IDE-compatible SATA connector for port 1 */
#define CONFIG_MVSATA_IDE
#define CONFIG_MVSATA_IDE_USE_PORT1
/* Needs byte-swapping for ATA data register */
#define CONFIG_IDE_SWAP_IO
/* Data, registers and alternate blocks are at the same offset */
#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0100)
#define CONFIG_SYS_ATA_REG_OFFSET	(0x0100)
#define CONFIG_SYS_ATA_ALT_OFFSET	(0x0100)
/* Each 8-bit ATA register is aligned to a 4-bytes address */
#define CONFIG_SYS_ATA_STRIDE		4
/* Controller supports 48-bits LBA addressing */
#define CONFIG_LBA48
/* A single bus, a single device */
#define CONFIG_SYS_IDE_MAXBUS		1
#define CONFIG_SYS_IDE_MAXDEVICE	1
/* ATA registers base is at SATA controller base */
#define CONFIG_SYS_ATA_BASE_ADDR	ORION5X_SATA_BASE
/* ATA bus 0 is orion5x port 1 on ED Mini V2 */
#define CONFIG_SYS_ATA_IDE0_OFFSET	ORION5X_SATA_PORT1_OFFSET
/* end of IDE defines */
#endif /* CMD_IDE */

/*
 * Common USB/EHCI configuration
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI		/* Enable EHCI USB support */
#define CONFIG_USB_EHCI_MARVELL
#define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */

/*
 * I2C related stuff
 */
#ifdef CONFIG_CMD_I2C
#define CONFIG_I2C_MVTWSI
#define CONFIG_I2C_MVTWSI_BASE		ORION5X_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE		0x0
#define CONFIG_SYS_I2C_SPEED		100000
#endif

/*
 *  Environment variables configurations
 */
#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_ENV_SECT_SIZE		0x2000	/* 16K */
#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_OFFSET		0x4000	/* env starts here */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */

/*
 * Other required minimal configurations
 */
#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT		/* call arch_misc_init() */
#define CONFIG_DISPLAY_CPUINFO		/* Display cpu info */
#define CONFIG_NR_DRAM_BANKS		1

#define CONFIG_SYS_LOAD_ADDR		0x00800000
#define CONFIG_SYS_MEMTEST_START	0x00400000
#define CONFIG_SYS_MEMTEST_END		0x007fffff
#define CONFIG_SYS_RESET_ADDRESS	0xffff0000
#define CONFIG_SYS_MAXARGS		16

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER

/* Enable command line editing */
#define CONFIG_CMDLINE_EDITING

/* provide extensive help */
#define CONFIG_SYS_LONGHELP

/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE		0
#define CONFIG_SYS_INIT_SP_ADDR	\
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

#endif /* _CONFIG_EDMINIV2_H */
Commit	Line	Data
ce9c227c	1	/*
57b4bce9	2	* Copyright (C) 2010 Albert ARIBAUD <[email protected]>
ce9c227c AA	3	*
	4	* Based on original Kirkwood support which is
	5	* (C) Copyright 2009
	6	* Marvell Semiconductor <www.marvell.com>
	7	* Written-by: Prafulla Wadaskar <[email protected]>
	8	*
	9	* See file CREDITS for list of people who contributed to this
	10	* project.
	11	*
	12	* This program is free software; you can redistribute it and/or
	13	* modify it under the terms of the GNU General Public License as
	14	* published by the Free Software Foundation; either version 2 of
	15	* the License, or (at your option) any later version.
	16	*
	17	* This program is distributed in the hope that it will be useful,
	18	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	19	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	20	* GNU General Public License for more details.
	21	*
	22	* You should have received a copy of the GNU General Public License
	23	* along with this program; if not, write to the Free Software
	24	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	25	* MA 02110-1301 USA
	26	*/
	27
	28	#ifndef _CONFIG_EDMINIV2_H
	29	#define _CONFIG_EDMINIV2_H
	30
	31	/*
	32	* Version number information
	33	*/
	34
	35	#define CONFIG_IDENT_STRING " EDMiniV2"
	36
	37	/*
	38	* High Level Configuration Options (easy to change)
	39	*/
	40
	41	#define CONFIG_MARVELL 1
	42	#define CONFIG_ARM926EJS 1 /* Basic Architecture */
	43	#define CONFIG_FEROCEON 1 /* CPU Core subversion */
	44	#define CONFIG_ORION5X 1 /* SOC Family Name */
	45	#define CONFIG_88F5182 1 /* SOC Name */
	46	#define CONFIG_MACH_EDMINIV2 1 /* Machine type */
	47
5ff8b354	48	#include <asm/arch/orion5x.h>
ce9c227c AA	49	/*
	50	* CLKs configurations
	51	*/
	52
	53	#define CONFIG_SYS_HZ 1000
	54
	55	/*
	56	* Board-specific values for Orion5x MPP low level init:
	57	* - MPPs 12 to 15 are SATA LEDs (mode 5)
	58	* - Others are GPIO/unused (mode 3 for MPP0, mode 5 for
	59	* MPP16 to MPP19, mode 0 for others
	60	*/
	61
	62	#define ORION5X_MPP0_7 0x00000003
	63	#define ORION5X_MPP8_15 0x55550000
ecaf3af2	64	#define ORION5X_MPP16_23 0x00005555
ce9c227c AA	65
	66	/*
	67	* Board-specific values for Orion5x GPIO low level init:
	68	* - GPIO3 is input (RTC interrupt)
	69	* - GPIO16 is Power LED control (0 = on, 1 = off)
	70	* - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
	71	* - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
	72	* - Last GPIO is 26, further bits are supposed to be 0.
	73	* Enable mask has ones for INPUT, 0 for OUTPUT.
	74	* Default is LED ON.
	75	*/
	76
	77	#define ORION5X_GPIO_OUT_ENABLE 0x03fcffff
	78	#define ORION5X_GPIO_OUT_VALUE 0x03fcffff
	79
	80	/*
	81	* NS16550 Configuration
	82	*/
	83
	84	#define CONFIG_SYS_NS16550
	85	#define CONFIG_SYS_NS16550_SERIAL
	86	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	87	#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
	88	#define CONFIG_SYS_NS16550_COM1 ORION5X_UART0_BASE
	89
	90	/*
	91	* Serial Port configuration
	92	* The following definitions let you select what serial you want to use
	93	* for your console driver.
	94	*/
	95
	96	#define CONFIG_CONS_INDEX 1 /Console on UART0 /
	97	#define CONFIG_BAUDRATE 115200
	98	#define CONFIG_SYS_BAUDRATE_TABLE \
	99	{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
	100
	101	/*
	102	* FLASH configuration
	103	*/
	104
	105	#define CONFIG_SYS_FLASH_CFI
	106	#define CONFIG_FLASH_CFI_DRIVER
	107	#define CONFIG_FLASH_CFI_LEGACY
	108	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
	109	#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */
	110	#define CONFIG_SYS_FLASH_BASE 0xfff80000
	111	#define CONFIG_SYS_FLASH_SECTSZ \
	112	{16384, 8192, 8192, 32768, \
	113	65536, 65536, 65536, 65536, 65536, 65536, 65536}
	114
	115	/* auto boot */
	116	#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
	117
	118	/*
	119	* For booting Linux, the board info and command line data
	120	* have to be in the first 8 MB of memory, since this is
	121	* the maximum mapped by the Linux kernel during initialization.
	122	*/
	123	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	124	#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
	125	#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
	126
	127	#define CONFIG_SYS_PROMPT "EDMiniV2> " /* Command Prompt */
	128	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
129	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
130	+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
131	/*
132	* Commands configuration - using default command set for now
133	*/
134	#include <config_cmd_default.h>
ecaf3af2	135	#define CONFIG_CMD_IDE
c2ca44c2	136	#define CONFIG_CMD_I2C
81a6c009	137	#define CONFIG_CMD_USB
ab9164d0	138
ce9c227c	139	/*
ab9164d0	140	* Network
ce9c227c	141	*/
ab9164d0 AA	142
	143	#ifdef CONFIG_CMD_NET
	144	#define CONFIG_MVGBE /* Enable Marvell GbE Driver */
	145	#define CONFIG_MVGBE_PORTS {1} /* enable port 0 only */
	146	#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */
	147	#define CONFIG_PHY_BASE_ADR 0x8
	148	#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
	149	#define CONFIG_NETCONSOLE /* include NetConsole support */
ab9164d0 AA	150	#define CONFIG_MII /* expose smi ove miiphy interface */
	151	#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
	152	#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
	153	#endif
ce9c227c	154
ecaf3af2 AA	155	/*
	156	* IDE
	157	*/
	158	#ifdef CONFIG_CMD_IDE
	159	#define __io
	160	#define CONFIG_IDE_PREINIT
	161	#define CONFIG_DOS_PARTITION
	162	#define CONFIG_CMD_EXT2
	163	/* ED Mini V has an IDE-compatible SATA connector for port 1 */
	164	#define CONFIG_MVSATA_IDE
	165	#define CONFIG_MVSATA_IDE_USE_PORT1
	166	/* Needs byte-swapping for ATA data register */
	167	#define CONFIG_IDE_SWAP_IO
	168	/* Data, registers and alternate blocks are at the same offset */
	169	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100)
	170	#define CONFIG_SYS_ATA_REG_OFFSET (0x0100)
	171	#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100)
	172	/* Each 8-bit ATA register is aligned to a 4-bytes address */
	173	#define CONFIG_SYS_ATA_STRIDE 4
	174	/* Controller supports 48-bits LBA addressing */
	175	#define CONFIG_LBA48
	176	/* A single bus, a single device */
	177	#define CONFIG_SYS_IDE_MAXBUS 1
	178	#define CONFIG_SYS_IDE_MAXDEVICE 1
	179	/* ATA registers base is at SATA controller base */
	180	#define CONFIG_SYS_ATA_BASE_ADDR ORION5X_SATA_BASE
	181	/* ATA bus 0 is orion5x port 1 on ED Mini V2 */
	182	#define CONFIG_SYS_ATA_IDE0_OFFSET ORION5X_SATA_PORT1_OFFSET
	183	/* end of IDE defines */
	184	#endif /* CMD_IDE */
	185
81a6c009 AA	186	/*
	187	* Common USB/EHCI configuration
	188	*/
	189	#ifdef CONFIG_CMD_USB
	190	#define CONFIG_USB_EHCI /* Enable EHCI USB support */
	191	#define CONFIG_USB_EHCI_MARVELL
	192	#define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
	193	#define CONFIG_USB_STORAGE
	194	#define CONFIG_DOS_PARTITION
	195	#define CONFIG_ISO_PARTITION
	196	#define CONFIG_SUPPORT_VFAT
	197	#endif /* CONFIG_CMD_USB */
	198
c2ca44c2 AA	199	/*
	200	* I2C related stuff
	201	*/
	202	#ifdef CONFIG_CMD_I2C
	203	#define CONFIG_I2C_MVTWSI
	204	#define CONFIG_I2C_MVTWSI_BASE ORION5X_TWSI_BASE
	205	#define CONFIG_SYS_I2C_SLAVE 0x0
	206	#define CONFIG_SYS_I2C_SPEED 100000
	207	#endif
	208
ce9c227c AA	209	/*
	210	* Environment variables configurations
	211	*/
	212	#define CONFIG_ENV_IS_IN_FLASH 1
	213	#define CONFIG_ENV_SECT_SIZE 0x2000 /* 16K */
	214	#define CONFIG_ENV_SIZE 0x2000
	215	#define CONFIG_ENV_OFFSET 0x4000 /* env starts here */
	216
	217	/*
	218	* Size of malloc() pool
	219	*/
	220	#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */
ce9c227c AA	221
	222	/*
	223	* Other required minimal configurations
	224	*/
	225	#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
	226	#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
	227	#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
	228	#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
	229	#define CONFIG_NR_DRAM_BANKS 1
	230
ce9c227c AA	231	#define CONFIG_SYS_LOAD_ADDR 0x00800000
	232	#define CONFIG_SYS_MEMTEST_START 0x00400000
	233	#define CONFIG_SYS_MEMTEST_END 0x007fffff
	234	#define CONFIG_SYS_RESET_ADDRESS 0xffff0000
	235	#define CONFIG_SYS_MAXARGS 16
	236
a203a7c8 AA	237	/* Use the HUSH parser */
a203a7c8 AA	238	#define CONFIG_SYS_HUSH_PARSER
a203a7c8 AA	239
	240	/* Enable command line editing */
	241	#define CONFIG_CMDLINE_EDITING
	242
	243	/* provide extensive help */
	244	#define CONFIG_SYS_LONGHELP
	245
0693923c AA	246	/* additions for new relocation code, must be added to all boards */
	247	#define CONFIG_SYS_SDRAM_BASE 0
	248	#define CONFIG_SYS_INIT_SP_ADDR \
25ddd1fb	249	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
0693923c	250
ce9c227c	251	#endif /* _CONFIG_EDMINIV2_H */