[J-u-boot.git] / include / configs / CPCI405AB.h

/*
 * (C) Copyright 2001-2003
 * Stefan Roese, esd gmbh germany, [email protected]
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_CPCI405		1	/* ...on a CPCI405 board	*/
#define CONFIG_CPCI405_VER2	1	/* ...version 2			*/
#define CONFIG_CPCI405AB	1	/* ...and special AB version	*/

#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/

#define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/

#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

#undef	CONFIG_BOOTARGS
#undef	CONFIG_BOOTCOMMAND

#define CONFIG_PREBOOT                  /* enable preboot variable      */

#undef	CONFIG_LOADS_ECHO		/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0	/* PHY address			*/
#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */

#define CONFIG_NET_MULTI	1
#undef  CONFIG_HAS_ETH1

#define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PCI
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_IDE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_EEPROM


#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#define CONFIG_SUPPORT_VFAT

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/

#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
#ifdef	CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#endif

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/

#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
#define CONFIG_SYS_BASE_BAUD	    691200

/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/

#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */

#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0		/* configure as pci adapter	*/
#define PCI_HOST_FORCE	1		/* configure as pci host	*/
#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/

#define CONFIG_PCI			/* include pci support		*/
#define CONFIG_PCI_HOST PCI_HOST_AUTO	/* select pci host function	*/
#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
					/* resource configuration	*/

#define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/

#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/

#define CONFIG_PCI_BOOTDELAY	0	/* enable pci bootdelay variable*/

#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A	*/
#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/

/*-----------------------------------------------------------------------
 * IDE/ATA stuff
 *-----------------------------------------------------------------------
 */
#undef	CONFIG_IDE_8xx_DIRECT		    /* no pcmcia interface required */
#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
#define CONFIG_IDE_RESET	1	/* reset for ide supported	*/

#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */

#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000

#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
/*
 * The following defines are added for buggy IOP480 byte interface.
 * All other boards should use the standard values (CPCI405 etc.)
 */
#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/

#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

/*-----------------------------------------------------------------------
 * I2C EEPROM (CAT24WC32) for environment
 */
#define CONFIG_HARD_I2C			/* I2c with hardware support */
#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
#define CONFIG_SYS_I2C_MULTI_EEPROMS   1       /* more than one eeprom used!   */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
					/* 32 byte page write mode using*/
					/* last 5 bits of the address	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

/* Use EEPROM for environment variables */

#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
				   /* total size of a CAT24WC32 is 4096 bytes */

#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
#define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0xFFC00000	/* FLASH bank #1	*/

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 */

/* Memory Bank 0 (Flash Bank 0) initialization					*/
#define CONFIG_SYS_EBC_PB0AP		0x92015480
#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 1 (Flash Bank 1) initialization					*/
#define CONFIG_SYS_EBC_PB1AP		0x92015480
#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 2 (CAN0, 1) initialization					*/
#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
#define CONFIG_SYS_LED_ADDR		0xF0000380

/* Memory Bank 3 (CompactFlash IDE) initialization				*/
#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */

/* Memory Bank 4 (NVRAM/RTC) initialization					*/
/*#define CONFIG_SYS_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
#define CONFIG_SYS_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
#define CONFIG_SYS_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 5 (optional Quart) initialization				*/
#define CONFIG_SYS_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
#define CONFIG_SYS_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 6 (FPGA internal) initialization					*/
#define CONFIG_SYS_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
#define CONFIG_SYS_FPGA_BASE_ADDR	0xF0400000

/*-----------------------------------------------------------------------
 * FPGA stuff
 */
/* FPGA internal regs */
#define CONFIG_SYS_FPGA_MODE		0x00
#define CONFIG_SYS_FPGA_STATUS		0x02
#define CONFIG_SYS_FPGA_TS		0x04
#define CONFIG_SYS_FPGA_TS_LOW		0x06
#define CONFIG_SYS_FPGA_TS_CAP0	0x10
#define CONFIG_SYS_FPGA_TS_CAP0_LOW	0x12
#define CONFIG_SYS_FPGA_TS_CAP1	0x14
#define CONFIG_SYS_FPGA_TS_CAP1_LOW	0x16
#define CONFIG_SYS_FPGA_TS_CAP2	0x18
#define CONFIG_SYS_FPGA_TS_CAP2_LOW	0x1a
#define CONFIG_SYS_FPGA_TS_CAP3	0x1c
#define CONFIG_SYS_FPGA_TS_CAP3_LOW	0x1e

/* FPGA Mode Reg */
#define CONFIG_SYS_FPGA_MODE_CF_RESET	    0x0001
#define CONFIG_SYS_FPGA_MODE_DUART_RESET   0x0002
#define CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
#define CONFIG_SYS_FPGA_MODE_1WIRE_DIR     0x0100     /* dir=1 -> output */
#define CONFIG_SYS_FPGA_MODE_SIM_OK_DIR    0x0200
#define CONFIG_SYS_FPGA_MODE_TESTRIG_FAIL_DIR 0x0400
#define CONFIG_SYS_FPGA_MODE_1WIRE         0x1000
#define CONFIG_SYS_FPGA_MODE_SIM_OK        0x2000     /* wired-or net from all devices */
#define CONFIG_SYS_FPGA_MODE_TESTRIG_FAIL  0x4000

/* FPGA Status Reg */
#define CONFIG_SYS_FPGA_STATUS_DIP0    0x0001
#define CONFIG_SYS_FPGA_STATUS_DIP1    0x0002
#define CONFIG_SYS_FPGA_STATUS_DIP2    0x0004
#define CONFIG_SYS_FPGA_STATUS_FLASH   0x0008
#define CONFIG_SYS_FPGA_STATUS_1WIRE   0x1000
#define CONFIG_SYS_FPGA_STATUS_SIM_OK  0x2000

#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S30 */

/* FPGA program pin configuration */
#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in data cache)
 */
#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */

#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
d4629c8c SR	1	/*
	2	* (C) Copyright 2001-2003
	3	* Stefan Roese, esd gmbh germany, [email protected]
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_405GP 1 /* This is a PPC405 CPU */
c837dcb1	37	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
d4629c8c	38	#define CONFIG_CPCI405 1 /* ...on a CPCI405 board */
c837dcb1 WD	39	#define CONFIG_CPCI405_VER2 1 /* ...version 2 */
c837dcb1 WD	40	#define CONFIG_CPCI405AB 1 /* ...and special AB version */
d4629c8c	41
c837dcb1	42	#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
d4629c8c	43
a20b27a3	44	#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
d4629c8c SR	45
	46	#define CONFIG_BAUDRATE 9600
	47	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	48
d4629c8c	49	#undef CONFIG_BOOTARGS
a20b27a3 SR	50	#undef CONFIG_BOOTCOMMAND
	51
	52	#define CONFIG_PREBOOT /* enable preboot variable */
d4629c8c	53
c837dcb1	54	#undef CONFIG_LOADS_ECHO /* echo on for serial download */
6d0f6bcf	55	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
d4629c8c SR	56
d4629c8c SR	57	#define CONFIG_MII 1 /* MII PHY management */
c837dcb1	58	#define CONFIG_PHY_ADDR 0 /* PHY address */
a20b27a3	59	#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
6f35c531 MF	60	#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
	61
	62	#define CONFIG_NET_MULTI 1
	63	#undef CONFIG_HAS_ETH1
d4629c8c SR	64
	65	#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
	66
5d2ebe1b JL	67	/*
	68	* BOOTP options
	69	*/
	70	#define CONFIG_BOOTP_SUBNETMASK
	71	#define CONFIG_BOOTP_GATEWAY
	72	#define CONFIG_BOOTP_HOSTNAME
	73	#define CONFIG_BOOTP_BOOTPATH
	74	#define CONFIG_BOOTP_DNS
	75	#define CONFIG_BOOTP_DNS2
	76	#define CONFIG_BOOTP_SEND_HOSTNAME
	77
d4629c8c	78
49cf7e8e JL	79	/*
	80	* Command line configuration.
	81	*/
	82	#include <config_cmd_default.h>
	83
	84	#define CONFIG_CMD_DHCP
	85	#define CONFIG_CMD_PCI
	86	#define CONFIG_CMD_IRQ
	87	#define CONFIG_CMD_IDE
	88	#define CONFIG_CMD_FAT
	89	#define CONFIG_CMD_ELF
	90	#define CONFIG_CMD_DATE
49cf7e8e JL	91	#define CONFIG_CMD_I2C
	92	#define CONFIG_CMD_MII
	93	#define CONFIG_CMD_PING
	94	#define CONFIG_CMD_EEPROM
	95
d4629c8c SR	96
	97	#define CONFIG_MAC_PARTITION
	98	#define CONFIG_DOS_PARTITION
	99
a20b27a3 SR	100	#define CONFIG_SUPPORT_VFAT
a20b27a3 SR	101
c837dcb1	102	#undef CONFIG_WATCHDOG /* watchdog disabled */
d4629c8c	103
c837dcb1	104	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
d4629c8c SR	105
	106	/*
	107	* Miscellaneous configurable options
	108	*/
6d0f6bcf JCPV	109	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	110	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
d4629c8c	111
6d0f6bcf JCPV	112	#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	113	#ifdef CONFIG_SYS_HUSH_PARSER
	114	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
d4629c8c SR	115	#endif
d4629c8c SR	116
49cf7e8e	117	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	118	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
d4629c8c	119	#else
6d0f6bcf	120	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
d4629c8c	121	#endif
6d0f6bcf JCPV	122	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	123	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	124	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
d4629c8c	125
6d0f6bcf	126	#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
d4629c8c	127
6d0f6bcf	128	#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
d4629c8c	129
6d0f6bcf JCPV	130	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	131	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
d4629c8c	132
6d0f6bcf JCPV	133	#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
	134	#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
	135	#define CONFIG_SYS_BASE_BAUD 691200
d4629c8c SR	136
d4629c8c SR	137	/* The following table includes the supported baudrates */
6d0f6bcf	138	#define CONFIG_SYS_BAUDRATE_TABLE \
8bde7f77 WD	139	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
8bde7f77 WD	140	57600, 115200, 230400, 460800, 921600 }
d4629c8c	141
6d0f6bcf JCPV	142	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	143	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
d4629c8c	144
6d0f6bcf	145	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
d4629c8c	146
ac53ee83 MF	147	#define CONFIG_CMDLINE_EDITING /* add command line history */
ac53ee83 MF	148
d4629c8c SR	149	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
d4629c8c SR	150
c837dcb1	151	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
d4629c8c	152
6d0f6bcf	153	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
53cf9435	154
d4629c8c SR	155	/*-----------------------------------------------------------------------
	156	* PCI stuff
	157	*-----------------------------------------------------------------------
	158	*/
c837dcb1 WD	159	#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
	160	#define PCI_HOST_FORCE 1 /* configure as pci host */
	161	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	162
	163	#define CONFIG_PCI /* include pci support */
	164	#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
	165	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	166	/* resource configuration */
	167
	168	#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
	169
a20b27a3 SR	170	#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
a20b27a3 SR	171
c837dcb1 WD	172	#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
c837dcb1 WD	173
6d0f6bcf JCPV	174	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
	175	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
	176	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
	177	#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
	178	#define CONFIG_SYS_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
	179	#define CONFIG_SYS_PCI_PTM1MS (~(bd->bi_memsize - 1) \| 1) /* memsize, enable hard-wired to 1 */
	180	#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	181	#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
	182	#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
	183	#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
d4629c8c SR	184
	185	/*-----------------------------------------------------------------------
	186	* IDE/ATA stuff
	187	*-----------------------------------------------------------------------
	188	*/
c837dcb1 WD	189	#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
c837dcb1 WD	190	#undef CONFIG_IDE_LED /* no led for ide supported */
d4629c8c SR	191	#define CONFIG_IDE_RESET 1 /* reset for ide supported */
d4629c8c SR	192
6d0f6bcf JCPV	193	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */
6d0f6bcf JCPV	194	#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS1) / max. 1 drives per IDE bus */
d4629c8c	195
6d0f6bcf JCPV	196	#define CONFIG_SYS_ATA_BASE_ADDR 0xF0100000
6d0f6bcf JCPV	197	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
d4629c8c	198
6d0f6bcf JCPV	199	#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
	200	#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
	201	#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
d4629c8c SR	202
	203	/*-----------------------------------------------------------------------
	204	* Start addresses for the final memory configuration
	205	* (Set up by the startup code)
6d0f6bcf	206	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
d4629c8c	207	*/
6d0f6bcf JCPV	208	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	209	#define CONFIG_SYS_FLASH_BASE 0xFFFC0000
	210	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	211	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
	212	#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
d4629c8c SR	213
	214	/*
	215	* For booting Linux, the board info and command line data
	216	* have to be in the first 8 MB of memory, since this is
	217	* the maximum mapped by the Linux kernel during initialization.
	218	*/
6d0f6bcf	219	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
ac53ee83 MF	220
	221	#define CONFIG_OF_LIBFDT
	222	#define CONFIG_OF_BOARD_SETUP
	223
d4629c8c SR	224	/*-----------------------------------------------------------------------
	225	* FLASH organization
	226	*/
6d0f6bcf JCPV	227	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
6d0f6bcf JCPV	228	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
d4629c8c	229
6d0f6bcf JCPV	230	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	231	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
d4629c8c	232
6d0f6bcf JCPV	233	#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
	234	#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
	235	#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
d4629c8c SR	236	/*
	237	* The following defines are added for buggy IOP480 byte interface.
	238	* All other boards should use the standard values (CPCI405 etc.)
	239	*/
6d0f6bcf JCPV	240	#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
	241	#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
	242	#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
d4629c8c	243
6d0f6bcf	244	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
d4629c8c	245
d4629c8c	246	/*-----------------------------------------------------------------------
2853d29b	247	* I2C EEPROM (CAT24WC32) for environment
d4629c8c	248	*/
2853d29b	249	#define CONFIG_HARD_I2C /* I2c with hardware support */
6d0f6bcf JCPV	250	#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
6d0f6bcf JCPV	251	#define CONFIG_SYS_I2C_SLAVE 0x7F
d4629c8c	252
6d0f6bcf JCPV	253	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */
6d0f6bcf JCPV	254	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
c837dcb1	255	/* mask of address bits that overflow into the "EEPROM chip address" */
6d0f6bcf JCPV	256	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
	257	#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* more than one eeprom used! */
	258	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
2853d29b	259	/* 32 byte page write mode using*/
c837dcb1	260	/* last 5 bits of the address */
6d0f6bcf	261	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
2853d29b SR	262
2853d29b SR	263	/* Use EEPROM for environment variables */
d4629c8c	264
bb1f8b4f	265	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
0e8d1586 JCPV	266	#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
0e8d1586 JCPV	267	#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/
2853d29b	268	/* total size of a CAT24WC32 is 4096 bytes */
d4629c8c	269
6d0f6bcf JCPV	270	#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
	271	#define CONFIG_SYS_NVRAM_SIZE (321024) / NVRAM size */
	272	#define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
d4629c8c	273
d4629c8c SR	274	/*
	275	* Init Memory Controller:
	276	*
	277	* BR0/1 and OR0/1 (FLASH)
	278	*/
	279
	280	#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
	281	#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
	282
	283	/*-----------------------------------------------------------------------
	284	* External Bus Controller (EBC) Setup
	285	*/
	286
c837dcb1	287	/* Memory Bank 0 (Flash Bank 0) initialization */
6d0f6bcf JCPV	288	#define CONFIG_SYS_EBC_PB0AP 0x92015480
6d0f6bcf JCPV	289	#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
d4629c8c	290
c837dcb1	291	/* Memory Bank 1 (Flash Bank 1) initialization */
6d0f6bcf JCPV	292	#define CONFIG_SYS_EBC_PB1AP 0x92015480
6d0f6bcf JCPV	293	#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
d4629c8c	294
c837dcb1	295	/* Memory Bank 2 (CAN0, 1) initialization */
6d0f6bcf JCPV	296	#define CONFIG_SYS_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
	297	#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
	298	#define CONFIG_SYS_LED_ADDR 0xF0000380
d4629c8c	299
c837dcb1	300	/* Memory Bank 3 (CompactFlash IDE) initialization */
6d0f6bcf JCPV	301	#define CONFIG_SYS_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	302	#define CONFIG_SYS_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
d4629c8c	303
c837dcb1	304	/* Memory Bank 4 (NVRAM/RTC) initialization */
6d0f6bcf JCPV	305	/#define CONFIG_SYS_EBC_PB4AP 0x01805280 / TWT=3,WBN=1,WBF=1,TH=1,SOR=1 */
	306	#define CONFIG_SYS_EBC_PB4AP 0x01805680 /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1 */
	307	#define CONFIG_SYS_EBC_PB4CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
d4629c8c	308
c837dcb1	309	/* Memory Bank 5 (optional Quart) initialization */
6d0f6bcf JCPV	310	#define CONFIG_SYS_EBC_PB5AP 0x04005B80 /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
6d0f6bcf JCPV	311	#define CONFIG_SYS_EBC_PB5CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
d4629c8c	312
c837dcb1	313	/* Memory Bank 6 (FPGA internal) initialization */
6d0f6bcf JCPV	314	#define CONFIG_SYS_EBC_PB6AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
	315	#define CONFIG_SYS_EBC_PB6CR 0xF041A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
	316	#define CONFIG_SYS_FPGA_BASE_ADDR 0xF0400000
d4629c8c SR	317
	318	/*-----------------------------------------------------------------------
	319	* FPGA stuff
	320	*/
	321	/* FPGA internal regs */
6d0f6bcf JCPV	322	#define CONFIG_SYS_FPGA_MODE 0x00
	323	#define CONFIG_SYS_FPGA_STATUS 0x02
	324	#define CONFIG_SYS_FPGA_TS 0x04
	325	#define CONFIG_SYS_FPGA_TS_LOW 0x06
	326	#define CONFIG_SYS_FPGA_TS_CAP0 0x10
	327	#define CONFIG_SYS_FPGA_TS_CAP0_LOW 0x12
	328	#define CONFIG_SYS_FPGA_TS_CAP1 0x14
	329	#define CONFIG_SYS_FPGA_TS_CAP1_LOW 0x16
	330	#define CONFIG_SYS_FPGA_TS_CAP2 0x18
	331	#define CONFIG_SYS_FPGA_TS_CAP2_LOW 0x1a
	332	#define CONFIG_SYS_FPGA_TS_CAP3 0x1c
	333	#define CONFIG_SYS_FPGA_TS_CAP3_LOW 0x1e
d4629c8c SR	334
d4629c8c SR	335	/* FPGA Mode Reg */
6d0f6bcf JCPV	336	#define CONFIG_SYS_FPGA_MODE_CF_RESET 0x0001
	337	#define CONFIG_SYS_FPGA_MODE_DUART_RESET 0x0002
	338	#define CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT 0x0004 /* only set on CPCI-405 Ver 3 */
	339	#define CONFIG_SYS_FPGA_MODE_1WIRE_DIR 0x0100 /* dir=1 -> output */
	340	#define CONFIG_SYS_FPGA_MODE_SIM_OK_DIR 0x0200
	341	#define CONFIG_SYS_FPGA_MODE_TESTRIG_FAIL_DIR 0x0400
	342	#define CONFIG_SYS_FPGA_MODE_1WIRE 0x1000
	343	#define CONFIG_SYS_FPGA_MODE_SIM_OK 0x2000 /* wired-or net from all devices */
	344	#define CONFIG_SYS_FPGA_MODE_TESTRIG_FAIL 0x4000
d4629c8c SR	345
d4629c8c SR	346	/* FPGA Status Reg */
6d0f6bcf JCPV	347	#define CONFIG_SYS_FPGA_STATUS_DIP0 0x0001
	348	#define CONFIG_SYS_FPGA_STATUS_DIP1 0x0002
	349	#define CONFIG_SYS_FPGA_STATUS_DIP2 0x0004
	350	#define CONFIG_SYS_FPGA_STATUS_FLASH 0x0008
	351	#define CONFIG_SYS_FPGA_STATUS_1WIRE 0x1000
	352	#define CONFIG_SYS_FPGA_STATUS_SIM_OK 0x2000
d4629c8c	353
6d0f6bcf JCPV	354	#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
6d0f6bcf JCPV	355	#define CONFIG_SYS_FPGA_MAX_SIZE 1281024 / 128kByte is enough for XC2S30 */
d4629c8c SR	356
d4629c8c SR	357	/* FPGA program pin configuration */
6d0f6bcf JCPV	358	#define CONFIG_SYS_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
	359	#define CONFIG_SYS_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
	360	#define CONFIG_SYS_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
	361	#define CONFIG_SYS_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */
	362	#define CONFIG_SYS_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */
d4629c8c SR	363
	364	/*-----------------------------------------------------------------------
	365	* Definitions for initial stack pointer and data area (in data cache)
	366	*/
6d0f6bcf	367	#define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
d4629c8c	368
6d0f6bcf JCPV	369	#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */
	370	#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
	371	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	372	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	373	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
d4629c8c SR	374
	375
	376	/*
	377	* Internal Definitions
	378	*
	379	* Boot Flags
	380	*/
	381	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	382	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	383
	384	#endif /* __CONFIG_H */