[J-u-boot.git] / board / pm828 / flash.c

/*
 * (C) Copyright 2001-2004
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * Flash Routines for Intel devices
 *
 *--------------------------------------------------------------------
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <mpc8xx.h>


flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

/*-----------------------------------------------------------------------
 */
ulong flash_get_size (volatile unsigned long *baseaddr,
					  flash_info_t * info)
{
	short i;
	unsigned long flashtest_h, flashtest_l;

	info->sector_count = info->size = 0;
	info->flash_id = FLASH_UNKNOWN;

	/* Write query command sequence and test FLASH answer
	 */
	baseaddr[0] = 0x00980098;
	baseaddr[1] = 0x00980098;

	flashtest_h = baseaddr[0];	/* manufacturer ID	*/
	flashtest_l = baseaddr[1];

	if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT)
		return (0);		/* no or unknown flash	*/

	flashtest_h = baseaddr[2];	/* device ID	        */
	flashtest_l = baseaddr[3];

	if (flashtest_h != flashtest_l)
		return (0);

	switch (flashtest_h) {
	case INTEL_ID_28F160C3B:
		info->flash_id = FLASH_28F160C3B;
		info->sector_count = 39;
		info->size = 0x00800000;	/* 4 * 2 MB = 8 MB	*/
		break;
	case INTEL_ID_28F160F3B:
		info->flash_id = FLASH_28F160F3B;
		info->sector_count = 39;
		info->size = 0x00800000;	/* 4 * 2 MB = 8 MB      */
		break;
	case INTEL_ID_28F640C3B:
		info->flash_id = FLASH_28F640C3B;
		info->sector_count = 135;
		info->size = 0x02000000;	/* 16 * 2 MB = 32 MB	*/
		break;
	default:
		return (0);			/* no or unknown flash	*/
	}

	info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */

	if (info->flash_id & FLASH_BTYPE) {
		volatile unsigned long *tmp = baseaddr;

		/* set up sector start adress table (bottom sector type)
		 * AND unlock the sectors (if our chip is 160C3 or 640c3)
		 */
		for (i = 0; i < info->sector_count; i++) {
			if (((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) ||
			    ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F640C3B)) {
				tmp[0] = 0x00600060;
				tmp[1] = 0x00600060;
				tmp[0] = 0x00D000D0;
				tmp[1] = 0x00D000D0;
			}
			info->start[i] = (uint) tmp;
			tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith       */
		}
	}

	memset (info->protect, 0, info->sector_count);

	baseaddr[0] = 0x00FF00FF;
	baseaddr[1] = 0x00FF00FF;

	return (info->size);
}

/*-----------------------------------------------------------------------
 */
unsigned long flash_init (void)
{
	unsigned long size_b0 = 0;
	int i;

	/* Init: no FLASHes known
	 */
	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
		flash_info[i].flash_id = FLASH_UNKNOWN;
	}

	/* Static FLASH Bank configuration here (only one bank) */

	size_b0 = flash_get_size ((ulong *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
				size_b0, size_b0 >> 20);
	}

	/* protect monitor and environment sectors
	 */

#ifndef CONFIG_BOOT_ROM
	/* If U-Boot is  booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH0_BASE
	 * but we shouldn't protect it.
	 */

# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
	flash_protect (FLAG_PROTECT_SET,
		       CONFIG_SYS_MONITOR_BASE,
		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
	);
# endif
#endif	/* CONFIG_BOOT_ROM */

#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
# ifndef  CONFIG_ENV_SIZE
#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
# endif
	flash_protect (FLAG_PROTECT_SET,
		       CONFIG_ENV_ADDR,
		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
#endif

	return (size_b0);
}

/*-----------------------------------------------------------------------
 */
void flash_print_info (flash_info_t * info)
{
	int i;

	if (info->flash_id == FLASH_UNKNOWN) {
		printf ("missing or unknown FLASH type\n");
		return;
	}

	switch ((info->flash_id >> 16) & 0xff) {
	case 0x89:
		printf ("INTEL ");
		break;
	default:
		printf ("Unknown Vendor ");
		break;
	}

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_28F160C3B:
		printf ("28F160C3B (16 M, bottom sector)\n");
		break;
	case FLASH_28F160F3B:
		printf ("28F160F3B (16 M, bottom sector)\n");
		break;
	case FLASH_28F640C3B:
		printf ("28F640C3B (64 M, bottom sector)\n");
		break;
	default:
		printf ("Unknown Chip Type\n");
		break;
	}

	printf ("  Size: %ld MB in %d Sectors\n",
			info->size >> 20, info->sector_count);

	printf ("  Sector Start Addresses:");
	for (i = 0; i < info->sector_count; ++i) {
		if ((i % 5) == 0)
			printf ("\n   ");
		printf (" %08lX%s",
			info->start[i],
			info->protect[i] ? " (RO)" : "     "
		);
	}
	printf ("\n");
}

/*-----------------------------------------------------------------------
 */
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
	int flag, prot, sect;
	ulong start, now, last;

	if ((s_first < 0) || (s_first > s_last)) {
		if (info->flash_id == FLASH_UNKNOWN) {
			printf ("- missing\n");
		} else {
			printf ("- no sectors to erase\n");
		}
		return 1;
	}

	prot = 0;
	for (sect = s_first; sect <= s_last; sect++) {
		if (info->protect[sect])
			prot++;
	}

	if (prot) {
		printf ("- Warning: %d protected sectors will not be erased!\n",
				prot);
	} else {
		printf ("\n");
	}

	/* Start erase on unprotected sectors
	 */
	for (sect = s_first; sect <= s_last; sect++) {
		volatile ulong *addr =
				(volatile unsigned long *) info->start[sect];

		start = get_timer (0);
		last = start;
		if (info->protect[sect] == 0) {
			/* Disable interrupts which might cause a timeout here
			 */
			flag = disable_interrupts ();

			/* Erase the block
			 */
			addr[0] = 0x00200020;
			addr[1] = 0x00200020;
			addr[0] = 0x00D000D0;
			addr[1] = 0x00D000D0;

			/* re-enable interrupts if necessary
			 */
			if (flag)
				enable_interrupts ();

			/* wait at least 80us - let's wait 1 ms
			 */
			udelay (1000);

			last = start;
			while ((addr[0] & 0x00800080) != 0x00800080 ||
				   (addr[1] & 0x00800080) != 0x00800080) {
				if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
					printf ("Timeout (erase suspended!)\n");
					/* Suspend erase
					 */
					addr[0] = 0x00B000B0;
					addr[1] = 0x00B000B0;
					goto DONE;
				}
				/* show that we're waiting
				 */
				if ((now - last) > 1000) {	/* every second */
					serial_putc ('.');
					last = now;
				}
			}
			if (addr[0] & 0x00220022 || addr[1] & 0x00220022) {
				printf ("*** ERROR: erase failed!\n");
				goto DONE;
			}
		}
		/* Clear status register and reset to read mode
		 */
		addr[0] = 0x00500050;
		addr[1] = 0x00500050;
		addr[0] = 0x00FF00FF;
		addr[1] = 0x00FF00FF;
	}

	printf (" done\n");

DONE:
	return 0;
}

static int write_word (flash_info_t *, volatile unsigned long *, ulong);

/*-----------------------------------------------------------------------
 * Copy memory to flash, returns:
 * 0 - OK
 * 1 - write timeout
 * 2 - Flash not erased
 */
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
	ulong v;
	int i, l, cc = cnt, res = 0;


	for (v=0; cc > 0; addr += 4, cc -= 4 - l) {
		l = (addr & 3);
		addr &= ~3;

		for (i = 0; i < 4; i++) {
			v = (v << 8) + (i < l || i - l >= cc ?
				*((unsigned char *) addr + i) : *src++);
		}

		if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0)
			break;
	}

	return (res);
}

/*-----------------------------------------------------------------------
 * Write a word to Flash, returns:
 * 0 - OK
 * 1 - write timeout
 * 2 - Flash not erased
 */
static int write_word (flash_info_t * info, volatile unsigned long *addr,
					   ulong data)
{
	int flag, res = 0;
	ulong start;

	/* Check if Flash is (sufficiently) erased
	 */
	if ((*addr & data) != data)
		return (2);

	/* Disable interrupts which might cause a timeout here
	 */
	flag = disable_interrupts ();

	*addr = 0x00400040;
	*addr = data;

	/* re-enable interrupts if necessary
	 */
	if (flag)
		enable_interrupts ();

	start = get_timer (0);
	while ((*addr & 0x00800080) != 0x00800080) {
		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
			/* Suspend program
			 */
			*addr = 0x00B000B0;
			res = 1;
			goto OUT;
		}
	}

	if (*addr & 0x00220022) {
		printf ("*** ERROR: program failed!\n");
		res = 1;
	}

OUT:
	/* Clear status register and reset to read mode
	 */
	*addr = 0x00500050;
	*addr = 0x00FF00FF;

	return (res);
}
Commit	Line	Data
efa329cb WD	1	/*
	2	* (C) Copyright 2001-2004
	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
	5	* Flash Routines for Intel devices
	6	*
	7	*--------------------------------------------------------------------
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26
	27	#include <common.h>
	28	#include <mpc8xx.h>
	29
	30
6d0f6bcf	31	flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
efa329cb WD	32
	33	/*-----------------------------------------------------------------------
	34	*/
	35	ulong flash_get_size (volatile unsigned long *baseaddr,
	36	flash_info_t * info)
	37	{
	38	short i;
	39	unsigned long flashtest_h, flashtest_l;
	40
	41	info->sector_count = info->size = 0;
	42	info->flash_id = FLASH_UNKNOWN;
	43
	44	/* Write query command sequence and test FLASH answer
	45	*/
	46	baseaddr[0] = 0x00980098;
	47	baseaddr[1] = 0x00980098;
	48
	49	flashtest_h = baseaddr[0]; /* manufacturer ID */
	50	flashtest_l = baseaddr[1];
	51
	52	if (flashtest_h != INTEL_MANUFACT \|\| flashtest_l != INTEL_MANUFACT)
	53	return (0); /* no or unknown flash */
	54
	55	flashtest_h = baseaddr[2]; /* device ID */
	56	flashtest_l = baseaddr[3];
	57
	58	if (flashtest_h != flashtest_l)
	59	return (0);
	60
	61	switch (flashtest_h) {
	62	case INTEL_ID_28F160C3B:
	63	info->flash_id = FLASH_28F160C3B;
	64	info->sector_count = 39;
	65	info->size = 0x00800000; /* 4 * 2 MB = 8 MB */
	66	break;
	67	case INTEL_ID_28F160F3B:
	68	info->flash_id = FLASH_28F160F3B;
	69	info->sector_count = 39;
	70	info->size = 0x00800000; /* 4 * 2 MB = 8 MB */
	71	break;
	72	case INTEL_ID_28F640C3B:
	73	info->flash_id = FLASH_28F640C3B;
	74	info->sector_count = 135;
	75	info->size = 0x02000000; /* 16 * 2 MB = 32 MB */
	76	break;
	77	default:
	78	return (0); /* no or unknown flash */
	79	}
	80
	81	info->flash_id \|= INTEL_MANUFACT << 16; /* set manufacturer offset */
	82
	83	if (info->flash_id & FLASH_BTYPE) {
	84	volatile unsigned long *tmp = baseaddr;
	85
	86	/* set up sector start adress table (bottom sector type)
	87	* AND unlock the sectors (if our chip is 160C3 or 640c3)
	88	*/
	89	for (i = 0; i < info->sector_count; i++) {
	90	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) \|\|
	91	((info->flash_id & FLASH_TYPEMASK) == FLASH_28F640C3B)) {
	92	tmp[0] = 0x00600060;
	93	tmp[1] = 0x00600060;
	94	tmp[0] = 0x00D000D0;
	95	tmp[1] = 0x00D000D0;
96	}
97	info->start[i] = (uint) tmp;
98	tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith */
99	}
100	}
101
102	memset (info->protect, 0, info->sector_count);
103
104	baseaddr[0] = 0x00FF00FF;
105	baseaddr[1] = 0x00FF00FF;
106
107	return (info->size);
108	}
109
110	/*-----------------------------------------------------------------------
111	*/
112	unsigned long flash_init (void)
113	{
114	unsigned long size_b0 = 0;
115	int i;
116
117	/* Init: no FLASHes known
118	*/
6d0f6bcf	119	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
efa329cb WD	120	flash_info[i].flash_id = FLASH_UNKNOWN;
	121	}
	122
	123	/* Static FLASH Bank configuration here (only one bank) */
	124
6d0f6bcf	125	size_b0 = flash_get_size ((ulong *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
efa329cb WD	126	if (flash_info[0].flash_id == FLASH_UNKNOWN \|\| size_b0 == 0) {
	127	printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
	128	size_b0, size_b0 >> 20);
	129	}
	130
	131	/* protect monitor and environment sectors
	132	*/
	133
	134	#ifndef CONFIG_BOOT_ROM
6d0f6bcf	135	/* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH0_BASE
efa329cb WD	136	* but we shouldn't protect it.
	137	*/
	138
6d0f6bcf	139	# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
efa329cb	140	flash_protect (FLAG_PROTECT_SET,
6d0f6bcf JCPV	141	CONFIG_SYS_MONITOR_BASE,
6d0f6bcf JCPV	142	CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
efa329cb WD	143	);
	144	# endif
	145	#endif /* CONFIG_BOOT_ROM */
	146
0e8d1586 JCPV	147	#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
	148	# ifndef CONFIG_ENV_SIZE
	149	# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
efa329cb WD	150	# endif
efa329cb WD	151	flash_protect (FLAG_PROTECT_SET,
0e8d1586 JCPV	152	CONFIG_ENV_ADDR,
0e8d1586 JCPV	153	CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
efa329cb WD	154	#endif
	155
	156	return (size_b0);
	157	}
	158
	159	/*-----------------------------------------------------------------------
	160	*/
	161	void flash_print_info (flash_info_t * info)
	162	{
	163	int i;
	164
	165	if (info->flash_id == FLASH_UNKNOWN) {
	166	printf ("missing or unknown FLASH type\n");
	167	return;
	168	}
	169
	170	switch ((info->flash_id >> 16) & 0xff) {
	171	case 0x89:
	172	printf ("INTEL ");
	173	break;
	174	default:
	175	printf ("Unknown Vendor ");
	176	break;
	177	}
	178
	179	switch (info->flash_id & FLASH_TYPEMASK) {
	180	case FLASH_28F160C3B:
	181	printf ("28F160C3B (16 M, bottom sector)\n");
	182	break;
	183	case FLASH_28F160F3B:
	184	printf ("28F160F3B (16 M, bottom sector)\n");
	185	break;
	186	case FLASH_28F640C3B:
	187	printf ("28F640C3B (64 M, bottom sector)\n");
	188	break;
	189	default:
	190	printf ("Unknown Chip Type\n");
	191	break;
	192	}
	193
	194	printf (" Size: %ld MB in %d Sectors\n",
	195	info->size >> 20, info->sector_count);
	196
	197	printf (" Sector Start Addresses:");
	198	for (i = 0; i < info->sector_count; ++i) {
	199	if ((i % 5) == 0)
	200	printf ("\n ");
	201	printf (" %08lX%s",
	202	info->start[i],
	203	info->protect[i] ? " (RO)" : " "
	204	);
	205	}
	206	printf ("\n");
	207	}
	208
	209	/*-----------------------------------------------------------------------
	210	*/
	211	int flash_erase (flash_info_t * info, int s_first, int s_last)
	212	{
	213	int flag, prot, sect;
	214	ulong start, now, last;
	215
	216	if ((s_first < 0) \|\| (s_first > s_last)) {
	217	if (info->flash_id == FLASH_UNKNOWN) {
218	printf ("- missing\n");
219	} else {
220	printf ("- no sectors to erase\n");
221	}
222	return 1;
223	}
224
225	prot = 0;
226	for (sect = s_first; sect <= s_last; sect++) {
227	if (info->protect[sect])
228	prot++;
229	}
230
231	if (prot) {
232	printf ("- Warning: %d protected sectors will not be erased!\n",
233	prot);
234	} else {
235	printf ("\n");
236	}
237
238	/* Start erase on unprotected sectors
239	*/
240	for (sect = s_first; sect <= s_last; sect++) {
241	volatile ulong *addr =
242	(volatile unsigned long *) info->start[sect];
243
244	start = get_timer (0);
245	last = start;
246	if (info->protect[sect] == 0) {
247	/* Disable interrupts which might cause a timeout here
248	*/
249	flag = disable_interrupts ();
250
251	/* Erase the block
252	*/
253	addr[0] = 0x00200020;
254	addr[1] = 0x00200020;
255	addr[0] = 0x00D000D0;
256	addr[1] = 0x00D000D0;
257
258	/* re-enable interrupts if necessary
259	*/
260	if (flag)
261	enable_interrupts ();
262
263	/* wait at least 80us - let's wait 1 ms
264	*/
265	udelay (1000);
266
267	last = start;
268	while ((addr[0] & 0x00800080) != 0x00800080 \|\|
269	(addr[1] & 0x00800080) != 0x00800080) {
6d0f6bcf	270	if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
efa329cb WD	271	printf ("Timeout (erase suspended!)\n");
	272	/* Suspend erase
	273	*/
	274	addr[0] = 0x00B000B0;
	275	addr[1] = 0x00B000B0;
	276	goto DONE;
	277	}
	278	/* show that we're waiting
	279	*/
	280	if ((now - last) > 1000) { /* every second */
	281	serial_putc ('.');
	282	last = now;
	283	}
	284	}
	285	if (addr[0] & 0x00220022 \|\| addr[1] & 0x00220022) {
	286	printf ("*** ERROR: erase failed!\n");
	287	goto DONE;
	288	}
	289	}
	290	/* Clear status register and reset to read mode
	291	*/
	292	addr[0] = 0x00500050;
	293	addr[1] = 0x00500050;
	294	addr[0] = 0x00FF00FF;
	295	addr[1] = 0x00FF00FF;
	296	}
	297
	298	printf (" done\n");
	299
	300	DONE:
	301	return 0;
	302	}
	303
	304	static int write_word (flash_info_t , volatile unsigned long , ulong);
	305
	306	/*-----------------------------------------------------------------------
	307	* Copy memory to flash, returns:
	308	* 0 - OK
	309	* 1 - write timeout
	310	* 2 - Flash not erased
	311	*/
	312	int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
	313	{
	314	ulong v;
	315	int i, l, cc = cnt, res = 0;
	316
	317
	318	for (v=0; cc > 0; addr += 4, cc -= 4 - l) {
	319	l = (addr & 3);
	320	addr &= ~3;
	321
	322	for (i = 0; i < 4; i++) {
	323	v = (v << 8) + (i < l \|\| i - l >= cc ?
	324	((unsigned char ) addr + i) : *src++);
	325	}
	326
	327	if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0)
	328	break;
	329	}
	330
	331	return (res);
	332	}
	333
	334	/*-----------------------------------------------------------------------
335	* Write a word to Flash, returns:
336	* 0 - OK
337	* 1 - write timeout
338	* 2 - Flash not erased
339	*/
340	static int write_word (flash_info_t * info, volatile unsigned long *addr,
341	ulong data)
342	{
343	int flag, res = 0;
344	ulong start;
345
346	/* Check if Flash is (sufficiently) erased
347	*/
348	if ((*addr & data) != data)
349	return (2);
350
351	/* Disable interrupts which might cause a timeout here
352	*/
353	flag = disable_interrupts ();
354
355	*addr = 0x00400040;
356	*addr = data;
357
358	/* re-enable interrupts if necessary
359	*/
360	if (flag)
361	enable_interrupts ();
362
363	start = get_timer (0);
364	while ((*addr & 0x00800080) != 0x00800080) {
6d0f6bcf	365	if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
efa329cb WD	366	/* Suspend program
	367	*/
	368	*addr = 0x00B000B0;
	369	res = 1;
	370	goto OUT;
	371	}
	372	}
	373
	374	if (*addr & 0x00220022) {
	375	printf ("*** ERROR: program failed!\n");
	376	res = 1;
	377	}
	378
	379	OUT:
	380	/* Clear status register and reset to read mode
	381	*/
	382	*addr = 0x00500050;
	383	*addr = 0x00FF00FF;
	384
	385	return (res);
	386	}