]>
Commit | Line | Data |
---|---|---|
0f8c9768 WD |
1 | /* |
2 | * (C) Copyright 2000 | |
3 | * Wolfgang Denk, DENX Software Engineering, [email protected]. | |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | */ | |
23 | ||
24 | /* | |
25 | * board/config.h - configuration options, board specific | |
26 | */ | |
27 | ||
28 | #ifndef __CONFIG_H | |
29 | #define __CONFIG_H | |
30 | ||
31 | /* | |
32 | * High Level Configuration Options | |
33 | * (easy to change) | |
34 | */ | |
35 | ||
36 | #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ | |
37 | #define CONFIG_IVMS8 1 /* ...on a IVMS8 board */ | |
38 | ||
39 | #if defined (CONFIG_IVMS8_16M) | |
40 | # define CONFIG_IDENT_STRING " IVMS8" | |
41 | #elif defined (CONFIG_IVMS8_32M) | |
42 | # define CONFIG_IDENT_STRING " IVMS8_128" | |
43 | #elif defined (CONFIG_IVMS8_64M) | |
44 | # define CONFIG_IDENT_STRING " IVMS8_256" | |
45 | #endif | |
46 | ||
47 | #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ | |
48 | #undef CONFIG_8xx_CONS_SMC2 | |
49 | #undef CONFIG_8xx_CONS_NONE | |
50 | #define CONFIG_BAUDRATE 115200 | |
51 | ||
52 | #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ | |
53 | #define CONFIG_8xx_GCLK_FREQ 50331648 | |
54 | ||
55 | #define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ | |
56 | ||
57 | #if 0 | |
58 | #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ | |
59 | #else | |
60 | #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ | |
61 | #endif | |
62 | #define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */ | |
63 | ||
64 | #define CONFIG_BOOTARGS "root=/dev/nfs rw " \ | |
65 | "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ | |
66 | "nfsaddrs=10.0.0.99:10.0.0.2" | |
67 | ||
68 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
69 | #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ | |
70 | ||
71 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
72 | ||
73 | #define CONFIG_STATUS_LED 1 /* Status LED enabled */ | |
74 | ||
348f258f JL |
75 | /* |
76 | * Command line configuration. | |
77 | */ | |
78 | #include <config_cmd_default.h> | |
79 | ||
80 | #define CONFIG_CMD_IDE | |
81 | ||
82 | ||
0f8c9768 WD |
83 | #define CONFIG_MAC_PARTITION |
84 | #define CONFIG_DOS_PARTITION | |
85 | ||
7be044e4 JL |
86 | /* |
87 | * BOOTP options | |
88 | */ | |
89 | #define CONFIG_BOOTP_SUBNETMASK | |
90 | #define CONFIG_BOOTP_HOSTNAME | |
91 | #define CONFIG_BOOTP_BOOTPATH | |
92 | #define CONFIG_BOOTP_BOOTFILESIZE | |
93 | ||
0f8c9768 | 94 | |
0f8c9768 WD |
95 | /* |
96 | * Miscellaneous configurable options | |
97 | */ | |
98 | #define CFG_LONGHELP /* undef to save memory */ | |
99 | #define CFG_PROMPT "=> " /* Monitor Command Prompt */ | |
348f258f | 100 | #if defined(CONFIG_CMD_KGDB) |
0f8c9768 WD |
101 | #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
102 | #else | |
103 | #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ | |
104 | #endif | |
105 | #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ | |
106 | #define CFG_MAXARGS 16 /* max number of command args */ | |
107 | #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ | |
108 | ||
109 | #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ | |
110 | #define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ | |
111 | ||
112 | #define CFG_LOAD_ADDR 0x00100000 /* default load address */ | |
113 | ||
114 | #define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ | |
115 | ||
116 | #define CFG_PB_SDRAM_CLKE 0x00008000 /* PB 16 */ | |
117 | #define CFG_PB_ETH_POWERDOWN 0x00010000 /* PB 15 */ | |
118 | #define CFG_PB_IDE_MOTOR 0x00020000 /* PB 14 */ | |
119 | ||
120 | #define CFG_PC_ETH_RESET ((ushort)0x0010) /* PC 11 */ | |
121 | #define CFG_PC_IDE_RESET ((ushort)0x0020) /* PC 10 */ | |
122 | ||
123 | #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ | |
124 | ||
125 | #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } | |
126 | ||
127 | /* | |
128 | * Low Level Configuration Settings | |
129 | * (address mappings, register initial values, etc.) | |
130 | * You should know what you are doing if you make changes here. | |
131 | */ | |
132 | /*----------------------------------------------------------------------- | |
133 | * Internal Memory Mapped Register | |
134 | */ | |
135 | #define CFG_IMMR 0xFFF00000 /* was: 0xFF000000 */ | |
136 | ||
137 | /*----------------------------------------------------------------------- | |
138 | * Definitions for initial stack pointer and data area (in DPRAM) | |
139 | */ | |
140 | #define CFG_INIT_RAM_ADDR CFG_IMMR | |
141 | #if defined (CONFIG_IVMS8_16M) | |
142 | # define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ | |
143 | #elif defined (CONFIG_IVMS8_32M) | |
144 | # define CFG_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ | |
145 | #elif defined (CONFIG_IVMS8_64M) | |
146 | # define CFG_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ | |
147 | #endif | |
148 | ||
149 | #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ | |
150 | #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) | |
151 | #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET | |
152 | ||
153 | /*----------------------------------------------------------------------- | |
154 | * Start addresses for the final memory configuration | |
155 | * (Set up by the startup code) | |
156 | * Please note that CFG_SDRAM_BASE _must_ start at 0 | |
157 | */ | |
158 | #define CFG_SDRAM_BASE 0x00000000 | |
159 | #define CFG_FLASH_BASE 0xFF000000 | |
160 | #ifdef DEBUG | |
161 | #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ | |
162 | #else | |
163 | #define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ | |
164 | #endif | |
165 | #define CFG_MONITOR_BASE CFG_FLASH_BASE | |
166 | #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ | |
167 | ||
168 | /* | |
169 | * For booting Linux, the board info and command line data | |
170 | * have to be in the first 8 MB of memory, since this is | |
171 | * the maximum mapped by the Linux kernel during initialization. | |
172 | */ | |
173 | #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ | |
174 | /*----------------------------------------------------------------------- | |
175 | * FLASH organization | |
176 | */ | |
177 | #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
178 | #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ | |
179 | ||
180 | #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ | |
181 | #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
182 | ||
5a1aceb0 | 183 | #define CONFIG_ENV_IS_IN_FLASH 1 |
0f8c9768 WD |
184 | #define CFG_ENV_OFFSET 0x7A000 /* Offset of Environment Sector */ |
185 | #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ | |
186 | /*----------------------------------------------------------------------- | |
187 | * Cache Configuration | |
188 | */ | |
189 | #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ | |
348f258f | 190 | #if defined(CONFIG_CMD_KGDB) |
0f8c9768 WD |
191 | #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ |
192 | #endif | |
193 | ||
194 | /*----------------------------------------------------------------------- | |
195 | * SYPCR - System Protection Control 11-9 | |
196 | * SYPCR can only be written once after reset! | |
197 | *----------------------------------------------------------------------- | |
198 | * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze | |
199 | */ | |
200 | #if defined(CONFIG_WATCHDOG) | |
201 | # if defined (CONFIG_IVMS8_16M) | |
202 | # define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ | |
53677ef1 | 203 | SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) |
0f8c9768 WD |
204 | # elif defined (CONFIG_IVMS8_32M) |
205 | # define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ | |
206 | SYPCR_SWE | SYPCR_SWP) | |
207 | # elif defined (CONFIG_IVMS8_64M) | |
208 | # define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ | |
209 | SYPCR_SWE | SYPCR_SWP) | |
210 | # endif | |
211 | #else | |
212 | # define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) | |
213 | #endif | |
214 | ||
215 | /*----------------------------------------------------------------------- | |
216 | * SIUMCR - SIU Module Configuration 11-6 | |
217 | *----------------------------------------------------------------------- | |
218 | * PCMCIA config., multi-function pin tri-state | |
219 | */ | |
220 | /* EARB, DBGC and DBPC are initialised by the HCW */ | |
221 | /* => 0x000000C0 */ | |
222 | #define CFG_SIUMCR (SIUMCR_BSC | SIUMCR_GB5E) | |
223 | ||
224 | /*----------------------------------------------------------------------- | |
225 | * TBSCR - Time Base Status and Control 11-26 | |
226 | *----------------------------------------------------------------------- | |
227 | * Clear Reference Interrupt Status, Timebase freezing enabled | |
228 | */ | |
229 | #define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) | |
230 | ||
231 | /*----------------------------------------------------------------------- | |
232 | * PISCR - Periodic Interrupt Status and Control 11-31 | |
233 | *----------------------------------------------------------------------- | |
234 | * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled | |
235 | */ | |
236 | #define CFG_PISCR (PISCR_PS | PISCR_PITF) | |
237 | ||
238 | /*----------------------------------------------------------------------- | |
239 | * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 | |
240 | *----------------------------------------------------------------------- | |
241 | * Reset PLL lock status sticky bit, timer expired status bit and timer | |
242 | * interrupt status bit, set PLL multiplication factor ! | |
243 | */ | |
244 | /* 0x00B0C0C0 */ | |
245 | #define CFG_PLPRCR \ | |
246 | ( (11 << PLPRCR_MF_SHIFT) | \ | |
247 | PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/ \ | |
248 | /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ | |
249 | PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ | |
250 | ) | |
251 | ||
252 | /*----------------------------------------------------------------------- | |
253 | * SCCR - System Clock and reset Control Register 15-27 | |
254 | *----------------------------------------------------------------------- | |
255 | * Set clock output, timebase and RTC source and divider, | |
256 | * power management and some other internal clocks | |
257 | */ | |
258 | #define SCCR_MASK SCCR_EBDF11 | |
259 | /* 0x01800014 */ | |
260 | #define CFG_SCCR (SCCR_COM01 | /*SCCR_TBS|*/ \ | |
261 | SCCR_RTDIV | SCCR_RTSEL | \ | |
53677ef1 | 262 | /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ |
0f8c9768 WD |
263 | SCCR_EBDF00 | SCCR_DFSYNC00 | \ |
264 | SCCR_DFBRG00 | SCCR_DFNL000 | \ | |
265 | SCCR_DFNH000 | SCCR_DFLCD101 | \ | |
266 | SCCR_DFALCD00) | |
267 | ||
268 | /*----------------------------------------------------------------------- | |
269 | * RTCSC - Real-Time Clock Status and Control Register 11-27 | |
270 | *----------------------------------------------------------------------- | |
271 | */ | |
272 | /* 0x00C3 */ | |
273 | #define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) | |
274 | ||
275 | ||
276 | /*----------------------------------------------------------------------- | |
277 | * RCCR - RISC Controller Configuration Register 19-4 | |
278 | *----------------------------------------------------------------------- | |
279 | */ | |
280 | /* TIMEP=2 */ | |
281 | #define CFG_RCCR 0x0200 | |
282 | ||
283 | /*----------------------------------------------------------------------- | |
284 | * RMDS - RISC Microcode Development Support Control Register | |
285 | *----------------------------------------------------------------------- | |
286 | */ | |
287 | #define CFG_RMDS 0 | |
288 | ||
289 | /*----------------------------------------------------------------------- | |
290 | * | |
291 | * Interrupt Levels | |
292 | *----------------------------------------------------------------------- | |
293 | */ | |
294 | #define CFG_CPM_INTERRUPT 13 /* SIU_LEVEL6 */ | |
295 | ||
296 | /*----------------------------------------------------------------------- | |
297 | * PCMCIA stuff | |
298 | *----------------------------------------------------------------------- | |
299 | * | |
300 | */ | |
301 | #define CFG_PCMCIA_MEM_ADDR (0xE0000000) | |
302 | #define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) | |
303 | #define CFG_PCMCIA_DMA_ADDR (0xE4000000) | |
304 | #define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) | |
305 | #define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) | |
306 | #define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) | |
307 | #define CFG_PCMCIA_IO_ADDR (0xEC000000) | |
308 | #define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) | |
309 | ||
310 | /*----------------------------------------------------------------------- | |
311 | * IDE/ATA stuff | |
312 | *----------------------------------------------------------------------- | |
313 | */ | |
314 | #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ | |
315 | #define CONFIG_IDE_RESET 1 /* reset for ide supported */ | |
316 | ||
317 | #define CFG_IDE_MAXBUS 1 /* The IVMS8 has only 1 IDE bus */ | |
318 | #define CFG_IDE_MAXDEVICE 1 /* ... and only 1 IDE device */ | |
319 | ||
320 | #define CFG_ATA_BASE_ADDR 0xFE100000 | |
321 | #define CFG_ATA_IDE0_OFFSET 0x0000 | |
322 | #undef CFG_ATA_IDE1_OFFSET /* only one IDE bus available */ | |
323 | ||
324 | #define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ | |
325 | #define CFG_ATA_REG_OFFSET 0x0080 /* Offset for normal register accesses */ | |
326 | #define CFG_ATA_ALT_OFFSET 0x0100 /* Offset for alternate registers */ | |
327 | ||
328 | /*----------------------------------------------------------------------- | |
329 | * | |
330 | *----------------------------------------------------------------------- | |
331 | * | |
332 | */ | |
0f8c9768 WD |
333 | #define CFG_DER 0 |
334 | ||
335 | /* | |
336 | * Init Memory Controller: | |
337 | * | |
338 | * BR0 and OR0 (FLASH) | |
339 | */ | |
340 | ||
341 | #define FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank #0 */ | |
342 | ||
343 | /* used to re-map FLASH both when starting from SRAM or FLASH: | |
344 | * restrict access enough to keep SRAM working (if any) | |
345 | * but not too much to meddle with FLASH accesses | |
346 | */ | |
347 | /* EPROMs are 512kb */ | |
348 | #define CFG_REMAP_OR_AM 0xFFF80000 /* OR addr mask */ | |
349 | #define CFG_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */ | |
350 | ||
351 | /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ | |
352 | #define CFG_OR_TIMING_FLASH (/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \ | |
353 | OR_SCY_5_CLK | OR_EHTR) | |
354 | ||
355 | #define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) | |
356 | #define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) | |
357 | /* 16 bit, bank valid */ | |
358 | #define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) | |
359 | ||
360 | /* | |
361 | * BR1/OR1 - ELIC SACCO bank @ 0xFE000000 | |
362 | * | |
363 | * AM=0xFFFF8 ATM=0 CSNT/SAM=1 ACS/G5LA/G5LS=3 BIH=1 SCY=2 SETA=0 TRLX=1 EHTR=1 | |
364 | */ | |
365 | #define ELIC_SACCO_BASE 0xFE000000 | |
366 | #define ELIC_SACCO_OR_AM 0xFFFF8000 | |
367 | #define ELIC_SACCO_TIMING 0x00000F26 | |
368 | ||
369 | #define CFG_OR1 (ELIC_SACCO_OR_AM | ELIC_SACCO_TIMING) | |
370 | #define CFG_BR1 ((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) | |
371 | ||
372 | /* | |
373 | * BR2/OR2 - ELIC EPIC bank @ 0xFE008000 | |
374 | * | |
375 | * AM=0xFFFF8 ATM=0 CSNT/SAM=1 ACS/G5LA/G5LS=3 BIH=1 SCY=2 SETA=0 TRLX=1 EHTR=1 | |
376 | */ | |
377 | #define ELIC_EPIC_BASE 0xFE008000 | |
378 | #define ELIC_EPIC_OR_AM 0xFFFF8000 | |
379 | #define ELIC_EPIC_TIMING 0x00000F26 | |
380 | ||
381 | #define CFG_OR2 (ELIC_EPIC_OR_AM | ELIC_EPIC_TIMING) | |
382 | #define CFG_BR2 ((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) | |
383 | ||
384 | /* | |
385 | * BR3/OR3: SDRAM | |
386 | * | |
387 | * Multiplexed addresses, GPL5 output to GPL5_A (don't care) | |
388 | */ | |
389 | #define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank */ | |
390 | #define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ | |
391 | #define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */ | |
392 | ||
393 | #define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ | |
394 | ||
395 | #define CFG_OR3_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) | |
396 | #define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V ) | |
397 | ||
398 | /* | |
399 | * BR4/OR4: not used | |
400 | */ | |
401 | ||
402 | /* | |
403 | * BR5/OR5: SHARC ADSP-2165L | |
404 | * | |
405 | * AM=0xFFC00 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=3 BIH=1 SCY=0 SETA=0 TRLX=0 EHTR=0 | |
406 | */ | |
407 | #define SHARC_BASE 0xFE400000 | |
408 | #define SHARC_OR_AM 0xFFC00000 | |
409 | #define SHARC_TIMING 0x00000700 | |
410 | ||
411 | #define CFG_OR5 (SHARC_OR_AM | SHARC_TIMING ) | |
412 | #define CFG_BR5 ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V ) | |
413 | ||
414 | /* | |
415 | * Memory Periodic Timer Prescaler | |
416 | */ | |
417 | ||
418 | /* periodic timer for refresh */ | |
2535d602 | 419 | #define CFG_MBMR_PTB 204 |
0f8c9768 WD |
420 | |
421 | /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ | |
422 | #define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ | |
423 | #define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ | |
424 | ||
425 | /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ | |
426 | #define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ | |
427 | #if defined (CONFIG_IVMS8_16M) | |
428 | #define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ | |
429 | #elif defined (CONFIG_IVMS8_32M) | |
430 | #define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ | |
431 | #elif defined (CONFIG_IVMS8_64M) | |
432 | #define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV8 /* setting for 1 bank */ | |
433 | #endif | |
434 | ||
435 | ||
436 | /* | |
437 | * MBMR settings for SDRAM | |
438 | */ | |
439 | ||
440 | #if defined (CONFIG_IVMS8_16M) | |
441 | /* 8 column SDRAM */ | |
2535d602 | 442 | # define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ |
53677ef1 WD |
443 | MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \ |
444 | MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) | |
0f8c9768 WD |
445 | #elif defined (CONFIG_IVMS8_32M) |
446 | /* 128 MBit SDRAM */ | |
2535d602 WD |
447 | #define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ |
448 | MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \ | |
449 | MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) | |
0f8c9768 WD |
450 | #elif defined (CONFIG_IVMS8_64M) |
451 | /* 128 MBit SDRAM */ | |
2535d602 WD |
452 | #define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ |
453 | MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \ | |
454 | MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) | |
0f8c9768 WD |
455 | |
456 | #endif | |
457 | ||
458 | /* | |
459 | * Internal Definitions | |
460 | * | |
461 | * Boot Flags | |
462 | */ | |
463 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
464 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
465 | ||
466 | #endif /* __CONFIG_H */ |