[J-u-boot.git] / include / configs / W7OLMG.h

/*
 * (C) Copyright 2001
 * Erik Theisen, Wave 7 Optics, [email protected]
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405GP		1		/* This is a PPC405GP CPU	*/
#define CONFIG_4xx		1		/* ...member of PPC405 family	*/
#define CONFIG_W7O		1		/* ...on a Wave 7 Optics board	*/
#define CONFIG_W7OLMG		1		/* ...specifically an LMG	*/

#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000

#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f	*/
#define	CONFIG_MISC_INIT_F	1		/* and misc_init_f()		*/
#define	CONFIG_MISC_INIT_R	1		/* and misc_init_r()		*/

#define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/

#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	3		/* autoboot after 3 seconds	*/

#if 1
#define CONFIG_BOOTCOMMAND	"bootvx"	/* VxWorks boot command		*/
#else
#define CONFIG_BOOTCOMMAND	"bootp"		/* autoboot command		*/
#endif

#undef CONFIG_BOOTARGS

#define CONFIG_LOADADDR		F0080000

#define CONFIG_ETHADDR		00:06:0D:00:00:00 /* Default, overridden at boot	*/
#define CONFIG_OVERWRITE_ETHADDR_ONCE
#define CONFIG_IPADDR		192.168.1.1
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_SERVERIP		192.168.1.2

#define CONFIG_LOADS_ECHO	1		/* echo on for serial download	*/
#undef CONFIG_SYS_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/

#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII		1		/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0		/* PHY address			*/
#define CONFIG_NET_MULTI

#define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
#define CONFIG_DTT_LM75     1                /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS  {2, 4}           /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP	70
#define CONFIG_SYS_DTT_LOW_TEMP	-30
#define CONFIG_SYS_DTT_HYSTERESIS	3


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PCI
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_BEDBUG
#define CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_BSP
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_DTT


#undef CONFIG_WATCHDOG				/* watchdog disabled		*/
#define CONFIG_HW_WATCHDOG			/* HW Watchdog, board specific	*/

#define	CONFIG_SPD_EEPROM			/* SPD EEPROM for SDRAM param.	*/
#define CONFIG_SPDDRAM_SILENT			/* No output if spd fails	*/
/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
#define CONFIG_SYS_PROMPT		"Wave7Optics> " /* Monitor Command Prompt	*/
#undef  CONFIG_SYS_HUSH_PARSER				/* No hush parse for U-Boot       */
#ifdef  CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
#endif
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size	*/
#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on		*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/

#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()

#undef  CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
#define CONFIG_SYS_405_UART_ERRATA_59			/* 405GP/CR Rev. D silicon */
#define CONFIG_SYS_BASE_BAUD		384000


/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	{9600}

#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
#define CONFIG_SYS_EXTBDINFO		1		/* use extended board_info (bd_t) */

#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER	0		/* configure as pci adapter	*/
#define PCI_HOST_FORCE		1		/* configure as pci host	*/
#define PCI_HOST_AUTO		2		/* detected via arbiter enable	*/

#define CONFIG_PCI				/* include pci support		*/
#define CONFIG_PCI_HOST		PCI_HOST_AUTO	/* select pci host function	*/
#define CONFIG_PCI_PNP				/* pci plug-and-play		*/
/* resource configuration	*/
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014		/* PCI Vendor ID: IBM		*/
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0156		/* PCI Device ID: 405GP		*/
#define CONFIG_SYS_PCI_PTM1LA		0x00000000	/* point to sdram		*/
#define CONFIG_SYS_PCI_PTM1MS		0x80000001	/* 2GB, enable hard-wired to 1	*/
#define CONFIG_SYS_PCI_PTM1PCI		0x00000000      /* Host: use this pci address   */
#define CONFIG_SYS_PCI_PTM2LA		0x00000000	/* disabled			*/
#define CONFIG_SYS_PCI_PTM2MS		0x00000000	/* disabled			*/
#define CONFIG_SYS_PCI_PTM2PCI		0x00000000      /* Host: use this pci address   */

/*-----------------------------------------------------------------------
 * Set up values for external bus controller
 * used by cpu_init.c
 *-----------------------------------------------------------------------
 */
 /* use PerWE instead of PCI_INT ( these functions share a pin ) */
#define CONFIG_USE_PERWE 1

/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
#define CONFIG_SYS_TEMP_STACK_OCM        1

/* bank 0 is boot flash */
/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
#define CONFIG_SYS_W7O_EBC_PB0AP   0x03050440
/* BAS=0xFFE,BS=0x1(2MB),BU=0x3(R/W),BW=0x0(8 bits) */
#define CONFIG_SYS_W7O_EBC_PB0CR   0xFFE38000

/* bank 1 is main flash */
/* BME=0,TWT=9,CSN=1,OEN=1,WBN=0,WBF=0,TH=1,RE=0,SOR=0,BEM=1,PEN=0 */
#define CONFIG_SYS_EBC_PB1AP   0x04850240
/* BAS=0xF00,BS=0x7(128MB),BU=0x3(R/W),BW=0x10(32 bits) */
#define CONFIG_SYS_EBC_PB1CR   0xF00FC000

/* bank 2 is RTC/NVRAM */
/* BME=0,TWT=6,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
#define CONFIG_SYS_EBC_PB2AP   0x03000440
/* BAS=0xFC0,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
#define CONFIG_SYS_EBC_PB2CR   0xFC018000

/* bank 3 is FPGA 0 */
/* BME=0,TWT=4,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=0,PEN=0 */
#define CONFIG_SYS_EBC_PB3AP   0x02000400
/* BAS=0xFD0,BS=0x0(1MB),BU=0x3(R/W),BW=0x1(16 bits) */
#define CONFIG_SYS_EBC_PB3CR   0xFD01A000

/* bank 4 is SAM 8 bit range */
/* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
#define CONFIG_SYS_EBC_PB4AP   0x02840380
/* BAS=,BS=,BU=0x3(R/W),BW=0x0(8 bits) */
#define CONFIG_SYS_EBC_PB4CR   0xFE878000

/* bank 5 is SAM 16 bit range */
/* BME=0,TWT=10,CSN=2,OEN=0,WBN=0,WBF=0,TH=6,RE=1,SOR=1,BEM=0,PEN=0 */
#define CONFIG_SYS_EBC_PB5AP   0x05040d80
/* BAS=,BS=,BU=0x3(R/W),BW=0x1(16 bits) */
#define CONFIG_SYS_EBC_PB5CR   0xFD87A000

/* bank 6 is unused */
/* PB6AP = 0 */
#define CONFIG_SYS_EBC_PB6AP   0x00000000
/* PB6CR = 0 */
#define CONFIG_SYS_EBC_PB6CR   0x00000000

/* bank 7 is LED register */
/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
#define CONFIG_SYS_W7O_EBC_PB7AP   0x03050440
/* BAS=0xFE0,BS=0x0(1MB),BU=0x3(R/W),BW=0x2(32 bits) */
#define CONFIG_SYS_W7O_EBC_PB7CR   0xFE01C000

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 196 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* max number of memory banks	*/
#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max number of sec on 1 chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout, Flash Erase, in ms	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout, Flash Write, in ms	*/
#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use real Flash protection	*/

#if 1 /* Use NVRAM for environment variables */
/*-----------------------------------------------------------------------
 * NVRAM organization
 */
#define CONFIG_ENV_IS_IN_NVRAM	1		/* use NVRAM for env vars	*/
#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfc000000	/* NVRAM base address		*/
#define CONFIG_SYS_NVRAM_SIZE		(32*1024)	/* NVRAM size			*/
#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
/*define CONFIG_ENV_ADDR		 \
	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) Env  */
#define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE_ADDR

#else /* Use Boot Flash for environment variables */
/*-----------------------------------------------------------------------
 * Flash EEPROM for environment
 */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
#define CONFIG_ENV_SIZE		0x10000		/* Total Size of env. sector	*/

#define CONFIG_ENV_SECT_SIZE	0x10000		/* see README - env sec tot sze */
#endif

/*-----------------------------------------------------------------------
 * I2C EEPROM (ATMEL 24C04N)
 */
#define CONFIG_HARD_I2C		1		/* Hardware assisted I2C	*/
#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM ATMEL 24C04N		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_I2C_MULTI_EEPROMS
/*-----------------------------------------------------------------------
 * Definitions for Serial Presence Detect EEPROM address
 * (to get SDRAM settings)
 */
#define SPD_EEPROM_ADDRESS      0x50	/* XXX conflicting address!!! XXX */

/*
 * Init Memory Controller:
 */
#define FLASH_BASE0_PRELIM	0xFFE00000	/* FLASH bank #0		*/
#define FLASH_BASE1_PRELIM	0xF0000000	/* FLASH bank #1		*/

/* On Chip Memory location */
#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in RAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM	*/
#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
#endif

/*
 * FPGA(s) configuration
 */
#define CONFIG_SYS_FPGA_IMAGE_LEN	0x80000		/* 512KB FPGA image		*/
#define CONFIG_NUM_FPGAS	1		/* Number of FPGAs on board	*/
#define CONFIG_MAX_FPGAS	6		/* Maximum number of FPGAs	*/
#define CONFIG_FPGAS_BASE	0xFD000000L	/* Base address of FPGAs	*/
#define CONFIG_FPGAS_BANK_SIZE	0x00100000L	/* FPGAs' mmap bank size	*/

#endif	/* __CONFIG_H */
Commit	Line	Data
e2211743 WD	1	/*
	2	* (C) Copyright 2001
	3	* Erik Theisen, Wave 7 Optics, [email protected]
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
	37	#define CONFIG_4xx 1 /* ...member of PPC405 family */
	38	#define CONFIG_W7O 1 /* ...on a Wave 7 Optics board */
	39	#define CONFIG_W7OLMG 1 /* ...specifically an LMG */
	40
2ae18241 WD	41	#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
2ae18241 WD	42
c837dcb1 WD	43	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
c837dcb1 WD	44	#define CONFIG_MISC_INIT_F 1 /* and misc_init_f() */
3a8f28d0	45	#define CONFIG_MISC_INIT_R 1 /* and misc_init_r() */
e2211743 WD	46
	47	#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
	48
	49	#define CONFIG_BAUDRATE 9600
	50	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	51
	52	#if 1
	53	#define CONFIG_BOOTCOMMAND "bootvx" /* VxWorks boot command */
	54	#else
	55	#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
	56	#endif
	57
	58	#undef CONFIG_BOOTARGS
	59
	60	#define CONFIG_LOADADDR F0080000
	61
	62	#define CONFIG_ETHADDR 00:06:0D:00:00:00 /* Default, overridden at boot */
	63	#define CONFIG_OVERWRITE_ETHADDR_ONCE
	64	#define CONFIG_IPADDR 192.168.1.1
	65	#define CONFIG_NETMASK 255.255.255.0
	66	#define CONFIG_SERVERIP 192.168.1.2
	67
	68	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	69	#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* disallow baudrate change */
e2211743	70
96e21f86	71	#define CONFIG_PPC4xx_EMAC
e2211743 WD	72	#define CONFIG_MII 1 /* MII PHY management */
e2211743 WD	73	#define CONFIG_PHY_ADDR 0 /* PHY address */
18cc7afd	74	#define CONFIG_NET_MULTI
e2211743 WD	75
	76	#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
	77	#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
	78	#define CONFIG_DTT_SENSORS {2, 4} /* Sensor addresses */
6d0f6bcf JCPV	79	#define CONFIG_SYS_DTT_MAX_TEMP 70
	80	#define CONFIG_SYS_DTT_LOW_TEMP -30
	81	#define CONFIG_SYS_DTT_HYSTERESIS 3
e2211743	82
e2211743	83
a1aa0bb5 JL	84	/*
	85	* BOOTP options
	86	*/
	87	#define CONFIG_BOOTP_BOOTFILESIZE
	88	#define CONFIG_BOOTP_BOOTPATH
	89	#define CONFIG_BOOTP_GATEWAY
	90	#define CONFIG_BOOTP_HOSTNAME
	91
	92
a5562901 JL	93	/*
	94	* Command line configuration.
	95	*/
	96	#include <config_cmd_default.h>
	97
	98	#define CONFIG_CMD_PCI
	99	#define CONFIG_CMD_IRQ
	100	#define CONFIG_CMD_ASKENV
	101	#define CONFIG_CMD_DHCP
	102	#define CONFIG_CMD_BEDBUG
	103	#define CONFIG_CMD_DATE
	104	#define CONFIG_CMD_I2C
	105	#define CONFIG_CMD_EEPROM
	106	#define CONFIG_CMD_ELF
	107	#define CONFIG_CMD_BSP
	108	#define CONFIG_CMD_REGINFO
	109	#define CONFIG_CMD_DTT
	110
e2211743 WD	111
	112	#undef CONFIG_WATCHDOG /* watchdog disabled */
	113	#define CONFIG_HW_WATCHDOG /* HW Watchdog, board specific */
	114
	115	#define CONFIG_SPD_EEPROM /* SPD EEPROM for SDRAM param. */
db2f721f	116	#define CONFIG_SPDDRAM_SILENT /* No output if spd fails */
e2211743 WD	117	/*
	118	* Miscellaneous configurable options
	119	*/
6d0f6bcf JCPV	120	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	121	#define CONFIG_SYS_PROMPT "Wave7Optics> " /* Monitor Command Prompt */
	122	#undef CONFIG_SYS_HUSH_PARSER /* No hush parse for U-Boot */
	123	#ifdef CONFIG_SYS_HUSH_PARSER
	124	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
e2211743	125	#endif
a5562901	126	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	127	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
e2211743	128	#else
6d0f6bcf	129	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
e2211743	130	#endif
6d0f6bcf JCPV	131	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	132	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	133	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
e2211743	134
6d0f6bcf JCPV	135	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	136	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
e2211743	137
550650dd SR	138	#define CONFIG_CONS_INDEX 1 /* Use UART0 */
	139	#define CONFIG_SYS_NS16550
	140	#define CONFIG_SYS_NS16550_SERIAL
	141	#define CONFIG_SYS_NS16550_REG_SIZE 1
	142	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
	143
6d0f6bcf JCPV	144	#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
	145	#define CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
	146	#define CONFIG_SYS_BASE_BAUD 384000
e2211743 WD	147
	148
	149	/* The following table includes the supported baudrates */
6d0f6bcf	150	#define CONFIG_SYS_BAUDRATE_TABLE {9600}
e2211743	151
6d0f6bcf JCPV	152	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	153	#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info (bd_t) */
e2211743	154
6d0f6bcf	155	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
e2211743 WD	156
	157	/*-----------------------------------------------------------------------
	158	* PCI stuff
	159	*-----------------------------------------------------------------------
	160	*/
	161	#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
	162	#define PCI_HOST_FORCE 1 /* configure as pci host */
	163	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	164
	165	#define CONFIG_PCI /* include pci support */
	166	#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
	167	#define CONFIG_PCI_PNP /* pci plug-and-play */
	168	/* resource configuration */
6d0f6bcf JCPV	169	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* PCI Vendor ID: IBM */
	170	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0156 /* PCI Device ID: 405GP */
	171	#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
	172	#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
	173	#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	174	#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
	175	#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
	176	#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
e2211743 WD	177
	178	/*-----------------------------------------------------------------------
	179	* Set up values for external bus controller
	180	* used by cpu_init.c
	181	*-----------------------------------------------------------------------
	182	*/
	183	/* use PerWE instead of PCI_INT ( these functions share a pin ) */
	184	#define CONFIG_USE_PERWE 1
	185
	186	/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
6d0f6bcf	187	#define CONFIG_SYS_TEMP_STACK_OCM 1
e2211743 WD	188
	189	/* bank 0 is boot flash */
	190	/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
6d0f6bcf	191	#define CONFIG_SYS_W7O_EBC_PB0AP 0x03050440
e2211743	192	/* BAS=0xFFE,BS=0x1(2MB),BU=0x3(R/W),BW=0x0(8 bits) */
6d0f6bcf	193	#define CONFIG_SYS_W7O_EBC_PB0CR 0xFFE38000
e2211743 WD	194
	195	/* bank 1 is main flash */
	196	/* BME=0,TWT=9,CSN=1,OEN=1,WBN=0,WBF=0,TH=1,RE=0,SOR=0,BEM=1,PEN=0 */
6d0f6bcf	197	#define CONFIG_SYS_EBC_PB1AP 0x04850240
e2211743	198	/* BAS=0xF00,BS=0x7(128MB),BU=0x3(R/W),BW=0x10(32 bits) */
6d0f6bcf	199	#define CONFIG_SYS_EBC_PB1CR 0xF00FC000
e2211743 WD	200
	201	/* bank 2 is RTC/NVRAM */
	202	/* BME=0,TWT=6,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
6d0f6bcf	203	#define CONFIG_SYS_EBC_PB2AP 0x03000440
e2211743	204	/* BAS=0xFC0,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
6d0f6bcf	205	#define CONFIG_SYS_EBC_PB2CR 0xFC018000
e2211743 WD	206
	207	/* bank 3 is FPGA 0 */
	208	/* BME=0,TWT=4,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=0,PEN=0 */
6d0f6bcf	209	#define CONFIG_SYS_EBC_PB3AP 0x02000400
e2211743	210	/* BAS=0xFD0,BS=0x0(1MB),BU=0x3(R/W),BW=0x1(16 bits) */
6d0f6bcf	211	#define CONFIG_SYS_EBC_PB3CR 0xFD01A000
e2211743 WD	212
	213	/* bank 4 is SAM 8 bit range */
	214	/* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
6d0f6bcf	215	#define CONFIG_SYS_EBC_PB4AP 0x02840380
e2211743	216	/* BAS=,BS=,BU=0x3(R/W),BW=0x0(8 bits) */
6d0f6bcf	217	#define CONFIG_SYS_EBC_PB4CR 0xFE878000
e2211743 WD	218
	219	/* bank 5 is SAM 16 bit range */
	220	/* BME=0,TWT=10,CSN=2,OEN=0,WBN=0,WBF=0,TH=6,RE=1,SOR=1,BEM=0,PEN=0 */
6d0f6bcf	221	#define CONFIG_SYS_EBC_PB5AP 0x05040d80
e2211743	222	/* BAS=,BS=,BU=0x3(R/W),BW=0x1(16 bits) */
6d0f6bcf	223	#define CONFIG_SYS_EBC_PB5CR 0xFD87A000
e2211743 WD	224
e2211743 WD	225	/* bank 6 is unused */
d1c3b275	226	/* PB6AP = 0 */
6d0f6bcf	227	#define CONFIG_SYS_EBC_PB6AP 0x00000000
d1c3b275	228	/* PB6CR = 0 */
6d0f6bcf	229	#define CONFIG_SYS_EBC_PB6CR 0x00000000
e2211743 WD	230
	231	/* bank 7 is LED register */
	232	/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
6d0f6bcf	233	#define CONFIG_SYS_W7O_EBC_PB7AP 0x03050440
e2211743	234	/* BAS=0xFE0,BS=0x0(1MB),BU=0x3(R/W),BW=0x2(32 bits) */
6d0f6bcf	235	#define CONFIG_SYS_W7O_EBC_PB7CR 0xFE01C000
e2211743 WD	236
	237	/*-----------------------------------------------------------------------
	238	* Start addresses for the final memory configuration
	239	* (Set up by the startup code)
6d0f6bcf	240	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
e2211743	241	*/
6d0f6bcf JCPV	242	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	243	#define CONFIG_SYS_FLASH_BASE 0xFFFC0000
	244	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	245	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 196 kB for Monitor */
	246	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
e2211743 WD	247
	248	/*
	249	* For booting Linux, the board info and command line data
	250	* have to be in the first 8 MB of memory, since this is
	251	* the maximum mapped by the Linux kernel during initialization.
	252	*/
6d0f6bcf	253	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
e2211743 WD	254	/*-----------------------------------------------------------------------
	255	* FLASH organization
	256	*/
6d0f6bcf JCPV	257	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
6d0f6bcf JCPV	258	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sec on 1 chip */
e2211743	259
6d0f6bcf JCPV	260	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout, Flash Erase, in ms */
	261	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout, Flash Write, in ms */
	262	#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use real Flash protection */
e2211743 WD	263
	264	#if 1 /* Use NVRAM for environment variables */
	265	/*-----------------------------------------------------------------------
	266	* NVRAM organization
	267	*/
9314cee6	268	#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for env vars */
6d0f6bcf JCPV	269	#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfc000000 /* NVRAM base address */
6d0f6bcf JCPV	270	#define CONFIG_SYS_NVRAM_SIZE (321024) / NVRAM size */
0e8d1586 JCPV	271	#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */
0e8d1586 JCPV	272	/*define CONFIG_ENV_ADDR \
6d0f6bcf JCPV	273	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) Env */
6d0f6bcf JCPV	274	#define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR
e2211743 WD	275
	276	#else /* Use Boot Flash for environment variables */
	277	/*-----------------------------------------------------------------------
	278	* Flash EEPROM for environment
	279	*/
5a1aceb0	280	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	281	#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */
0e8d1586 JCPV	282	#define CONFIG_ENV_SIZE 0x10000 /* Total Size of env. sector */
e2211743	283
0e8d1586	284	#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sec tot sze */
e2211743 WD	285	#endif
	286
	287	/*-----------------------------------------------------------------------
	288	* I2C EEPROM (ATMEL 24C04N)
	289	*/
	290	#define CONFIG_HARD_I2C 1 /* Hardware assisted I2C */
d0b0dcaa	291	#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
6d0f6bcf JCPV	292	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
6d0f6bcf JCPV	293	#define CONFIG_SYS_I2C_SLAVE 0x7F
e2211743	294
6d0f6bcf JCPV	295	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM ATMEL 24C04N */
	296	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
	297	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	298	#define CONFIG_SYS_I2C_MULTI_EEPROMS
e2211743 WD	299	/*-----------------------------------------------------------------------
	300	* Definitions for Serial Presence Detect EEPROM address
	301	* (to get SDRAM settings)
	302	*/
	303	#define SPD_EEPROM_ADDRESS 0x50 /* XXX conflicting address!!! XXX */
	304
e2211743 WD	305	/*
	306	* Init Memory Controller:
	307	*/
	308	#define FLASH_BASE0_PRELIM 0xFFE00000 /* FLASH bank #0 */
	309	#define FLASH_BASE1_PRELIM 0xF0000000 /* FLASH bank #1 */
	310
	311	/* On Chip Memory location */
6d0f6bcf JCPV	312	#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
6d0f6bcf JCPV	313	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
e2211743 WD	314
	315	/*-----------------------------------------------------------------------
	316	* Definitions for initial stack pointer and data area (in RAM)
	317	*/
6d0f6bcf	318	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
553f0982	319	#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
6d0f6bcf	320	#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
553f0982	321	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
6d0f6bcf	322	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
e2211743	323
a5562901	324	#if defined(CONFIG_CMD_KGDB)
e2211743 WD	325	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	326	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	327	#endif
	328
	329	/*
	330	* FPGA(s) configuration
	331	*/
6d0f6bcf	332	#define CONFIG_SYS_FPGA_IMAGE_LEN 0x80000 /* 512KB FPGA image */
e2211743 WD	333	#define CONFIG_NUM_FPGAS 1 /* Number of FPGAs on board */
	334	#define CONFIG_MAX_FPGAS 6 /* Maximum number of FPGAs */
	335	#define CONFIG_FPGAS_BASE 0xFD000000L /* Base address of FPGAs */
	336	#define CONFIG_FPGAS_BANK_SIZE 0x00100000L /* FPGAs' mmap bank size */
	337
	338	#endif /* __CONFIG_H */