[J-u-boot.git] / doc / README.ne2000

This driver supports NE2000 compatible cards (those based on DP8390,
DP83902 and similar). It can be used with PCMCIA/CF cards provided
that the CCR is correctly initialized.

The code is based on sources from the Linux kernel (pcnet_cs.c,
8390.h) and eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2
wonderful world are GPL, so this is, of course, GPL.

I developed and tested this driver on a custom PXA255 based system and
with a billionton CF network card connected to the PCMCIA interface of
the micro (have a look at README.PXA_CF for the support of this port).

The options you have to specify in the config file are (with the
value for my board as an example):

#define CONFIG_DRIVER_NE2000

- Enables the driver

#define CONFIG_DRIVER_NE2000_BASE (0x20000000+0x300)

- Address where the board is mapped


Enjoy!

Christian Pellegrin <[email protected]>
Commit	Line	Data
8ed96046 WD	1	This driver supports NE2000 compatible cards (those based on DP8390,
	2	DP83902 and similar). It can be used with PCMCIA/CF cards provided
	3	that the CCR is correctly initialized.
	4
	5	The code is based on sources from the Linux kernel (pcnet_cs.c,
	6	8390.h) and eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2
	7	wonderful world are GPL, so this is, of course, GPL.
	8
	9	I developed and tested this driver on a custom PXA255 based system and
	10	with a billionton CF network card connected to the PCMCIA interface of
	11	the micro (have a look at README.PXA_CF for the support of this port).
	12
	13	The options you have to specify in the config file are (with the
	14	value for my board as an example):
	15
	16	#define CONFIG_DRIVER_NE2000
	17
	18	- Enables the driver
	19
	20	#define CONFIG_DRIVER_NE2000_BASE (0x20000000+0x300)
	21
	22	- Address where the board is mapped
	23
8ed96046 WD	24
	25	Enjoy!
	26
	27	Christian Pellegrin <[email protected]>