[J-u-boot.git] / include / configs / B2.h

/*
 * (C) Copyright 2004
 * DAVE Srl
 *
 * http://www.dave-tech.it
 * http://www.wawnet.biz
 * mailto:[email protected]
 *
 * Configuation settings for the B2 board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_ARM7			1	/* This is a ARM7 CPU	*/
#define CONFIG_B2			1	/* on an B2 Board      */
#define CONFIG_ARM_THUMB	1	/* this is an ARM7TDMI */
#undef  CONFIG_ARM7_REVD		/* disable ARM720 REV.D Workarounds */

#define CONFIG_S3C44B0_CLOCK_SPEED	75 /* we have a 75Mhz S3C44B0*/


#undef CONFIG_USE_IRQ			/* don't need them anymore */


/*
 * Size of malloc() pool
 */
#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
#define CFG_ENV_SIZE		1024		/* 1024 bytes may be used for env vars*/
#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024 )
#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

/*
 * Hardware drivers
 */
#define CONFIG_DRIVER_LAN91C96
#define CONFIG_LAN91C96_BASE		0x04000300 /* base address         */
#define CONFIG_SMC_USE_32_BIT
#undef  CONFIG_SHOW_ACTIVITY
#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */

/*
 * select serial console configuration
 */
#define CONFIG_SERIAL1		1	/* we use Serial line 1 */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_BAUDRATE		115200

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DATE
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C


#define CONFIG_BOOTDELAY	5
#define CONFIG_ETHADDR	00:50:c2:1e:af:fb
#define CONFIG_BOOTARGS  "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \
							 ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb"
#define CONFIG_NETMASK  255.255.0.0
#define CONFIG_IPADDR   192.168.0.70
#define CONFIG_SERVERIP	192.168.0.23
#define CONFIG_BOOTFILE	"B2-rootfs/usr/B2-zImage.u-boot"
#define CONFIG_BOOTCOMMAND	"bootm 20000 f0000"

/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP				/* undef to save memory		*/
#define	CFG_PROMPT		"=>  "	/* Monitor Command Prompt	*/
#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS		16		/* max number of command args	*/
#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0C400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C800000	/* 4 ... 8 MB in DRAM	*/

#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */

#define	CFG_LOAD_ADDR		0x0c700000	/* default load address	*/

#define	CFG_HZ				1000		/* 1 kHz */

						/* valid baudrates */
#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
#endif

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */

#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */

#define CFG_FLASH_BASE		PHYS_FLASH_1

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/

#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
/*
 * The following defines are added for buggy IOP480 byte interface.
 * All other boards should use the standard values (CPCI405 etc.)
 */
#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/

#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

/*-----------------------------------------------------------------------
 * Environment Variable setup
 */
#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CFG_ENV_OFFSET		0x0	/* environment starts at the beginning of the EEPROM */

/*-----------------------------------------------------------------------
 * I2C EEPROM (STM24C02W6) for environment
 */
#define CONFIG_HARD_I2C			/* I2c with hardware support */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE		0xFE

#define CFG_I2C_EEPROM_ADDR	0xA8	/* EEPROM STM24C02W6		*/
#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
					/* 16 byte page write mode using*/
					/* last 4 bits of the address	*/
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
#define CFG_EEPROM_PAGE_WRITE_ENABLE

/* Flash banks JFFS2 should use */
/*
#define CFG_JFFS2_FIRST_BANK    0
#define CFG_JFFS2_FIRST_SECTOR	2
#define CFG_JFFS2_NUM_BANKS     1
*/

/*
	Linux TAGs (see lib_arm/armlinux.c)
*/
#define CONFIG_CMDLINE_TAG
#undef CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

#endif	/* __CONFIG_H */
Commit	Line	Data
074cff0d WD	1	/*
	2	* (C) Copyright 2004
	3	* DAVE Srl
	4	*
	5	* http://www.dave-tech.it
	6	* http://www.wawnet.biz
	7	* mailto:[email protected]
	8	*
	9	* Configuation settings for the B2 board.
	10	*
	11	* See file CREDITS for list of people who contributed to this
	12	* project.
	13	*
	14	* This program is free software; you can redistribute it and/or
	15	* modify it under the terms of the GNU General Public License as
	16	* published by the Free Software Foundation; either version 2 of
	17	* the License, or (at your option) any later version.
	18	*
	19	* This program is distributed in the hope that it will be useful,
	20	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	21	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	22	* GNU General Public License for more details.
	23	*
	24	* You should have received a copy of the GNU General Public License
	25	* along with this program; if not, write to the Free Software
	26	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	27	* MA 02111-1307 USA
	28	*/
	29
	30	#ifndef __CONFIG_H
	31	#define __CONFIG_H
	32
074cff0d WD	33	/*
	34	* High Level Configuration Options
	35	* (easy to change)
	36	*/
	37	#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
	38	#define CONFIG_B2 1 /* on an B2 Board */
	39	#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
53677ef1	40	#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
074cff0d WD	41
	42	#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/
	43
	44
	45	#undef CONFIG_USE_IRQ /* don't need them anymore */
	46
	47
	48	/*
	49	* Size of malloc() pool
	50	*/
	51	#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
	52	#define CFG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/
	53	#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024 )
	54	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	55
	56	/*
	57	* Hardware drivers
	58	*/
	59	#define CONFIG_DRIVER_LAN91C96
	60	#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */
	61	#define CONFIG_SMC_USE_32_BIT
	62	#undef CONFIG_SHOW_ACTIVITY
	63	#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
	64
	65	/*
	66	* select serial console configuration
	67	*/
	68	#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
	69
	70	/* allow to overwrite serial and ethaddr */
	71	#define CONFIG_ENV_OVERWRITE
	72
	73	#define CONFIG_BAUDRATE 115200
	74
5d2ebe1b JL	75	/*
	76	* BOOTP options
	77	*/
	78	#define CONFIG_BOOTP_SUBNETMASK
	79	#define CONFIG_BOOTP_GATEWAY
	80	#define CONFIG_BOOTP_HOSTNAME
	81	#define CONFIG_BOOTP_BOOTPATH
	82	#define CONFIG_BOOTP_BOOTFILESIZE
074cff0d	83
de8b2a6e JL	84
	85	/*
	86	* Command line configuration.
	87	*/
	88	#include <config_cmd_default.h>
	89
	90	#define CONFIG_CMD_DATE
	91	#define CONFIG_CMD_ELF
	92	#define CONFIG_CMD_EEPROM
	93	#define CONFIG_CMD_I2C
	94
074cff0d WD	95
	96	#define CONFIG_BOOTDELAY 5
	97	#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
	98	#define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \
	99	ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb"
	100	#define CONFIG_NETMASK 255.255.0.0
	101	#define CONFIG_IPADDR 192.168.0.70
	102	#define CONFIG_SERVERIP 192.168.0.23
	103	#define CONFIG_BOOTFILE "B2-rootfs/usr/B2-zImage.u-boot"
	104	#define CONFIG_BOOTCOMMAND "bootm 20000 f0000"
	105
	106	/*
	107	* Miscellaneous configurable options
	108	*/
	109	#define CFG_LONGHELP /* undef to save memory */
	110	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	111	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	112	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	113	#define CFG_MAXARGS 16 /* max number of command args */
	114	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	115
	116	#define CFG_MEMTEST_START 0x0C400000 /* memtest works on */
	117	#define CFG_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */
	118
	119	#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
	120
	121	#define CFG_LOAD_ADDR 0x0c700000 /* default load address */
	122
	123	#define CFG_HZ 1000 /* 1 kHz */
	124
	125	/* valid baudrates */
	126	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	127
	128	/*-----------------------------------------------------------------------
	129	* Stack sizes
	130	*
	131	* The stack sizes are set up in start.S using the settings below
	132	*/
	133	#define CONFIG_STACKSIZE (1281024) / regular stack */
	134	#ifdef CONFIG_USE_IRQ
	135	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	136	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	137	#endif
	138
	139	/*-----------------------------------------------------------------------
	140	* Physical Memory Map
	141	*/
	142	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
	143	#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
	144	#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
	145
	146	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	147	#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
	148
	149	#define CFG_FLASH_BASE PHYS_FLASH_1
	150
	151	/*-----------------------------------------------------------------------
	152	* FLASH and environment organization
	153	*/
	154	/*-----------------------------------------------------------------------
	155	* FLASH organization
	156	*/
	157	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	158	#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
159
160	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
161	#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
162
163	#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
164	#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
165	#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
166	/*
167	* The following defines are added for buggy IOP480 byte interface.
168	* All other boards should use the standard values (CPCI405 etc.)
169	*/
170	#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
171	#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
172	#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
173
174	#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
175
176	/*-----------------------------------------------------------------------
177	* Environment Variable setup
178	*/
179	#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
180	#define CFG_ENV_OFFSET 0x0 /* environment starts at the beginning of the EEPROM */
181
182	/*-----------------------------------------------------------------------
183	* I2C EEPROM (STM24C02W6) for environment
184	*/
185	#define CONFIG_HARD_I2C /* I2c with hardware support */
186	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
187	#define CFG_I2C_SLAVE 0xFE
188
189	#define CFG_I2C_EEPROM_ADDR 0xA8 /* EEPROM STM24C02W6 */
190	#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
191	/* mask of address bits that overflow into the "EEPROM chip address" */
192	/#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07/
193	#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
194	/* 16 byte page write mode using*/
195	/* last 4 bits of the address */
196	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
197	#define CFG_EEPROM_PAGE_WRITE_ENABLE
198
199	/* Flash banks JFFS2 should use */
200	/*
201	#define CFG_JFFS2_FIRST_BANK 0
202	#define CFG_JFFS2_FIRST_SECTOR 2
203	#define CFG_JFFS2_NUM_BANKS 1
204	*/
205
206	/*
207	Linux TAGs (see lib_arm/armlinux.c)
208	*/
209	#define CONFIG_CMDLINE_TAG
210	#undef CONFIG_SETUP_MEMORY_TAGS
211	#define CONFIG_INITRD_TAG
212
213	#endif /* __CONFIG_H */