[J-u-boot.git] / include / configs / imx8mm_venice.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2021 Gateworks Corporation
 */

#ifndef __IMX8MM_VENICE_H
#define __IMX8MM_VENICE_H

#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>

#define CONFIG_SYS_MONITOR_LEN		SZ_512K
#define CONFIG_SYS_UBOOT_BASE	\
	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)

#ifdef CONFIG_SPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CONFIG_MALLOC_F_ADDR		0x930000
/* For RAW image gives a error info not panic */

#endif

#define MEM_LAYOUT_ENV_SETTINGS \
	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
	"fdt_addr_r=0x50200000\0" \
	"scriptaddr=0x50280000\0" \
	"ramdisk_addr_r=0x50300000\0" \
	"kernel_comp_addr_r=0x40200000\0"

/* Enable Distro Boot */
#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 1) \
	func(MMC, mmc, 2) \
	func(USB, usb, 0) \
	func(USB, usb, 1) \
	func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
	BOOTENV \
	MEM_LAYOUT_ENV_SETTINGS \
	"script=boot.scr\0" \
	"bootm_size=0x10000000\0" \
	"dev=2\0" \
	"preboot=gsc wd-disable\0" \
	"console=ttymxc1,115200\0" \
	"update_firmware=" \
		"tftpboot $loadaddr $image && " \
		"setexpr blkcnt $filesize + 0x1ff && " \
		"setexpr blkcnt $blkcnt / 0x200 && " \
		"mmc dev $dev && " \
		"mmc write $loadaddr 0x42 $blkcnt\0" \
	"loadfdt=" \
		"if $fsload $fdt_addr_r $dir/$fdt_file1; " \
			"then echo loaded $fdt_file1; " \
		"elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
			"then echo loaded $fdt_file2; " \
		"elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
			"then echo loaded $fdt_file3; " \
		"elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
			"then echo loaded $fdt_file4; " \
		"elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
			"then echo loaded $fdt_file5; " \
		"fi\0" \
	"boot_net=" \
		"setenv fsload tftpboot; " \
		"run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
		"booti $kernel_addr_r - $fdt_addr_r\0" \
	"update_rootfs=" \
		"tftpboot $loadaddr $image && " \
		"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
	"update_all=" \
		"tftpboot $loadaddr $image && " \
		"gzwrite mmc $dev $loadaddr $filesize\0" \
	"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"

#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M

#define CONFIG_SYS_SDRAM_BASE           0x40000000

/* SDRAM configuration */
#define PHYS_SDRAM                      0x40000000
#define PHYS_SDRAM_SIZE			SZ_4G

/* FEC */
#define CONFIG_FEC_MXC_PHYADDR          0
#define FEC_QUIRK_ENET_MAC

#endif
Commit	Line	Data
03bf8436 TH	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* Copyright 2021 Gateworks Corporation
	4	*/
	5
	6	#ifndef __IMX8MM_VENICE_H
	7	#define __IMX8MM_VENICE_H
	8
	9	#include <asm/arch/imx-regs.h>
	10	#include <linux/sizes.h>
	11
03bf8436	12	#define CONFIG_SYS_MONITOR_LEN SZ_512K
03bf8436 TH	13	#define CONFIG_SYS_UBOOT_BASE \
	14	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
	15
	16	#ifdef CONFIG_SPL_BUILD
03bf8436 TH	17	/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
	18	#define CONFIG_MALLOC_F_ADDR 0x930000
	19	/* For RAW image gives a error info not panic */
03bf8436 TH	20
	21	#endif
	22
	23	#define MEM_LAYOUT_ENV_SETTINGS \
fd5c7173 TH	24	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
	25	"fdt_addr_r=0x50200000\0" \
	26	"scriptaddr=0x50280000\0" \
	27	"ramdisk_addr_r=0x50300000\0" \
	28	"kernel_comp_addr_r=0x40200000\0"
03bf8436	29
03bf8436	30	/* Enable Distro Boot */
03bf8436 TH	31	#define BOOT_TARGET_DEVICES(func) \
	32	func(MMC, mmc, 1) \
	33	func(MMC, mmc, 2) \
c5747369 TH	34	func(USB, usb, 0) \
c5747369 TH	35	func(USB, usb, 1) \
03bf8436 TH	36	func(DHCP, dhcp, na)
03bf8436 TH	37	#include <config_distro_bootcmd.h>
03bf8436 TH	38
	39	/* Initial environment variables */
	40	#define CONFIG_EXTRA_ENV_SETTINGS \
	41	BOOTENV \
	42	MEM_LAYOUT_ENV_SETTINGS \
	43	"script=boot.scr\0" \
	44	"bootm_size=0x10000000\0" \
03bf8436 TH	45	"dev=2\0" \
	46	"preboot=gsc wd-disable\0" \
	47	"console=ttymxc1,115200\0" \
	48	"update_firmware=" \
	49	"tftpboot $loadaddr $image && " \
	50	"setexpr blkcnt $filesize + 0x1ff && " \
	51	"setexpr blkcnt $blkcnt / 0x200 && " \
	52	"mmc dev $dev && " \
	53	"mmc write $loadaddr 0x42 $blkcnt\0" \
f3722dd6 TH	54	"loadfdt=" \
	55	"if $fsload $fdt_addr_r $dir/$fdt_file1; " \
	56	"then echo loaded $fdt_file1; " \
	57	"elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
	58	"then echo loaded $fdt_file2; " \
	59	"elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
	60	"then echo loaded $fdt_file3; " \
	61	"elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
	62	"then echo loaded $fdt_file4; " \
	63	"elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
	64	"then echo loaded $fdt_file5; " \
	65	"fi\0" \
03bf8436	66	"boot_net=" \
f3722dd6 TH	67	"setenv fsload tftpboot; " \
	68	"run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
	69	"booti $kernel_addr_r - $fdt_addr_r\0" \
03bf8436 TH	70	"update_rootfs=" \
	71	"tftpboot $loadaddr $image && " \
	72	"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
	73	"update_all=" \
	74	"tftpboot $loadaddr $image && " \
	75	"gzwrite mmc $dev $loadaddr $filesize\0" \
	76	"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
	77
	78	#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
	79	#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
03bf8436	80
03bf8436 TH	81	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	82
	83	/* SDRAM configuration */
	84	#define PHYS_SDRAM 0x40000000
52ae8d6c	85	#define PHYS_SDRAM_SIZE SZ_4G
03bf8436	86
6889412a TR	87	/* FEC */
	88	#define CONFIG_FEC_MXC_PHYADDR 0
	89	#define FEC_QUIRK_ENET_MAC
03bf8436	90
03bf8436	91	#endif