[J-u-boot.git] / include / configs / imx6q-bosch-acc.h

/* SPDX-License-Identifier: GPL-2.0+
 *
 * Copyright (c) 2017 DENX Software Engineering GmbH, Heiko Schocher <[email protected]>
 * Copyright (c) 2019 Bosch Thermotechnik GmbH
 * Copyright (c) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <[email protected]>
 */

#ifndef __IMX6Q_ACC_H
#define __IMX6Q_ACC_H

#include <linux/sizes.h>
#include "mx6_common.h"

#ifdef CONFIG_SYS_BOOT_EMMC
#define MMC_ROOTFS_DEV 0
#define MMC_ROOTFS_PART 2
#endif

#ifdef CONFIG_SYS_BOOT_EMMC
/* eMMC Boot */
#define ENV_EXTRA \
	"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
	"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
	"fitpart=1\0" \
	"optargs=ro quiet systemd.gpt_auto=false\0" \
	"production=1\0" \
	"mmcautodetect=yes\0" \
	"mmcrootfstype=ext4\0" \
	"finduuid=part uuid mmc ${mmcdev}:${mmcpart} uuid\0" \
	"mmcargs=run finduuid; setenv bootargs " \
		"root=PARTUUID=${uuid} ${optargs} rootfstype=${mmcrootfstype}\0" \
	"mmc_mmc_fit=run env_persist; run setbm; run mmcloadfit; " \
		"run auth_fit_or_reset; run mmcargs addcon; " \
		"bootm ${fit_addr}#${bootconf}\0" \
	"bootset=0\0" \
	"setbm=if test ${bootset} -eq 1; " \
		"then setenv mmcpart 4; setenv fitpart 3; " \
		"else; setenv mmcpart 2; setenv fitpart 1; fi\0" \
	"handle_ustate=if test ${ustate} -eq 2; then setenv ustate 3; fi\0" \
	"switch_bootset=if test ${bootset} -eq 1; then setenv bootset 0; " \
		"else; setenv bootset 1;fi\0" \
	"env_persisted=0\0" \
	"env_persist=if test ${env_persisted} != 1; " \
		"then env set env_persisted 1; run save_env; fi;\0" \
	"save_env=env save; env save\0" \
	"altbootcmd=run handle_ustate; run switch_bootset; run save_env; run bootcmd\0"

#define CONFIG_ENV_FLAGS_LIST_STATIC \
	"bootset:bw," \
	"clone_pending:bw," \
	"endurance_test:bw," \
	"env_persisted:bw," \
	"factory_reset:bw," \
	"fdtcontroladdr:xw," \
	"fitpart:dw," \
	"mmcpart:dw," \
	"production:bw," \
	"ustate:dw"

#else
/* SD Card boot */
#define ENV_EXTRA \
	"mmcdev=1\0" \
	"fitpart=1\0" \
	"rootpart=2\0" \
	"optargs=ro systemd.gpt_auto=false\0" \
	"finduuid=part uuid mmc ${mmcdev}:${rootpart} uuid\0" \
	"mmcargs=run finduuid;setenv bootargs root=PARTUUID=${uuid} ${optargs}\0" \
	"mmc_mmc_fit=run mmcloadfit; run auth_fit_or_reset; run mmcargs addcon; " \
		"bootm ${fit_addr}#${bootconf}\0"

#endif

/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootconf=conf-imx6q-bosch-acc.dtb\0"\
	"mmcfit_name=fitImage\0" \
	"mmcloadfit=ext4load mmc ${mmcdev}:${fitpart} ${fit_addr} ${mmcfit_name}\0" \
	"auth_fit_or_reset=hab_auth_img ${fit_addr} ${filesize} || reset\0" \
	"console=ttymxc0\0" \
	"addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
	"fit_addr=19000000\0" \
	ENV_EXTRA

/* Physical Memory Map */
#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE

/* SPL */
#ifdef CONFIG_SPL
#include "imx6_spl.h"

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_FSL_USDHC_NUM 2

#ifdef CONFIG_SYS_BOOT_EMMC

/* Boot from eMMC */
#define CONFIG_SYS_FSL_ESDHC_ADDR 1

#else

/* Boot from SD-card */
#  define CONFIG_SYS_FSL_ESDHC_ADDR	0

#endif

#endif
#endif

#define CONFIG_MXC_USB_PORTSC            (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS             0

#endif /* __IMX6Q_ACC_H */
Commit	Line	Data
55d1537c PO	1	/* SPDX-License-Identifier: GPL-2.0+
	2	*
	3	* Copyright (c) 2017 DENX Software Engineering GmbH, Heiko Schocher <[email protected]>
	4	* Copyright (c) 2019 Bosch Thermotechnik GmbH
	5	* Copyright (c) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <[email protected]>
	6	*/
	7
	8	#ifndef __IMX6Q_ACC_H
	9	#define __IMX6Q_ACC_H
	10
	11	#include <linux/sizes.h>
	12	#include "mx6_common.h"
	13
	14	#ifdef CONFIG_SYS_BOOT_EMMC
	15	#define MMC_ROOTFS_DEV 0
	16	#define MMC_ROOTFS_PART 2
	17	#endif
	18
	19	#ifdef CONFIG_SYS_BOOT_EMMC
	20	/* eMMC Boot */
	21	#define ENV_EXTRA \
	22	"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
	23	"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
	24	"fitpart=1\0" \
	25	"optargs=ro quiet systemd.gpt_auto=false\0" \
	26	"production=1\0" \
	27	"mmcautodetect=yes\0" \
	28	"mmcrootfstype=ext4\0" \
	29	"finduuid=part uuid mmc ${mmcdev}:${mmcpart} uuid\0" \
	30	"mmcargs=run finduuid; setenv bootargs " \
	31	"root=PARTUUID=${uuid} ${optargs} rootfstype=${mmcrootfstype}\0" \
	32	"mmc_mmc_fit=run env_persist; run setbm; run mmcloadfit; " \
	33	"run auth_fit_or_reset; run mmcargs addcon; " \
	34	"bootm ${fit_addr}#${bootconf}\0" \
	35	"bootset=0\0" \
	36	"setbm=if test ${bootset} -eq 1; " \
	37	"then setenv mmcpart 4; setenv fitpart 3; " \
	38	"else; setenv mmcpart 2; setenv fitpart 1; fi\0" \
	39	"handle_ustate=if test ${ustate} -eq 2; then setenv ustate 3; fi\0" \
	40	"switch_bootset=if test ${bootset} -eq 1; then setenv bootset 0; " \
	41	"else; setenv bootset 1;fi\0" \
	42	"env_persisted=0\0" \
	43	"env_persist=if test ${env_persisted} != 1; " \
	44	"then env set env_persisted 1; run save_env; fi;\0" \
	45	"save_env=env save; env save\0" \
	46	"altbootcmd=run handle_ustate; run switch_bootset; run save_env; run bootcmd\0"
	47
	48	#define CONFIG_ENV_FLAGS_LIST_STATIC \
	49	"bootset:bw," \
	50	"clone_pending:bw," \
	51	"endurance_test:bw," \
	52	"env_persisted:bw," \
	53	"factory_reset:bw," \
	54	"fdtcontroladdr:xw," \
	55	"fitpart:dw," \
	56	"mmcpart:dw," \
	57	"production:bw," \
	58	"ustate:dw"
	59
	60	#else
	61	/* SD Card boot */
	62	#define ENV_EXTRA \
	63	"mmcdev=1\0" \
	64	"fitpart=1\0" \
65	"rootpart=2\0" \
66	"optargs=ro systemd.gpt_auto=false\0" \
67	"finduuid=part uuid mmc ${mmcdev}:${rootpart} uuid\0" \
68	"mmcargs=run finduuid;setenv bootargs root=PARTUUID=${uuid} ${optargs}\0" \
69	"mmc_mmc_fit=run mmcloadfit; run auth_fit_or_reset; run mmcargs addcon; " \
70	"bootm ${fit_addr}#${bootconf}\0"
71
72	#endif
73
74	/* Default environment */
75	#define CONFIG_EXTRA_ENV_SETTINGS \
76	"bootconf=conf-imx6q-bosch-acc.dtb\0"\
77	"mmcfit_name=fitImage\0" \
78	"mmcloadfit=ext4load mmc ${mmcdev}:${fitpart} ${fit_addr} ${mmcfit_name}\0" \
79	"auth_fit_or_reset=hab_auth_img ${fit_addr} ${filesize} \|\| reset\0" \
80	"console=ttymxc0\0" \
81	"addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
82	"fit_addr=19000000\0" \
83	ENV_EXTRA
84
85	/* Physical Memory Map */
86	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
87
88	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
89	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
90	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
91
55d1537c PO	92	/* SPL */
	93	#ifdef CONFIG_SPL
	94	#include "imx6_spl.h"
	95
	96	#ifdef CONFIG_SPL_BUILD
	97	#define CONFIG_SYS_FSL_USDHC_NUM 2
	98
	99	#ifdef CONFIG_SYS_BOOT_EMMC
	100
	101	/* Boot from eMMC */
	102	#define CONFIG_SYS_FSL_ESDHC_ADDR 1
	103
	104	#else
	105
	106	/* Boot from SD-card */
	107	# define CONFIG_SYS_FSL_ESDHC_ADDR 0
	108
	109	#endif
	110
	111	#endif
	112	#endif
	113
55d1537c PO	114	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
55d1537c PO	115	#define CONFIG_MXC_USB_FLAGS 0
55d1537c PO	116
55d1537c PO	117	#endif /* __IMX6Q_ACC_H */