[J-u-boot.git] / include / configs / SBx81LIFXCAT.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
 */

#ifndef _CONFIG_SBX81LIFXCAT_H
#define _CONFIG_SBX81LIFXCAT_H

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

/*
 * NS16550 Configuration
 */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE

/*
 * Serial Port configuration
 * The following definitions let you select what serial you want to use
 * for your console driver.
 */

#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
#define MTDPARTS_MTDOOPS "errlog"

/*
 *  Environment variables configurations
 */

/*
 * U-Boot bootcode configuration
 */

#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for monitor */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/

/* size in bytes reserved for initial data */

#include <asm/arch/config.h>
/* There is no PHY directly connected so don't ask it for link status */

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable a single port */
#define CONFIG_PHY_BASE_ADR	0x01
#endif /* CONFIG_CMD_NET */

#endif /* _CONFIG_SBX81LIFXCAT_H */
Commit	Line	Data
a6477f7c CP	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
	4	*/
	5
	6	#ifndef _CONFIG_SBX81LIFXCAT_H
	7	#define _CONFIG_SBX81LIFXCAT_H
	8
a6477f7c CP	9	/* additions for new ARM relocation support */
	10	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	11
a6477f7c CP	12	/*
	13	* NS16550 Configuration
	14	*/
a6477f7c CP	15	#define CONFIG_SYS_NS16550_SERIAL
	16	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	17	#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
	18	#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
	19
	20	/*
	21	* Serial Port configuration
	22	* The following definitions let you select what serial you want to use
	23	* for your console driver.
	24	*/
	25
a6477f7c CP	26	#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
a6477f7c CP	27	#define MTDPARTS_MTDOOPS "errlog"
a6477f7c CP	28
	29	/*
	30	* Environment variables configurations
	31	*/
a6477f7c CP	32
	33	/*
	34	* U-Boot bootcode configuration
	35	*/
	36
	37	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
a6477f7c CP	38
	39	/*
	40	* For booting Linux, the board info and command line data
	41	* have to be in the first 8 MB of memory, since this is
	42	* the maximum mapped by the Linux kernel during initialization.
	43	*/
	44	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
	45
	46	/* size in bytes reserved for initial data */
	47
	48	#include <asm/arch/config.h>
	49	/* There is no PHY directly connected so don't ask it for link status */
a6477f7c	50
a6477f7c CP	51	/*
	52	* Ethernet Driver configuration
	53	*/
	54	#ifdef CONFIG_CMD_NET
a6477f7c CP	55	#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
a6477f7c CP	56	#define CONFIG_PHY_BASE_ADR 0x01
a6477f7c CP	57	#endif /* CONFIG_CMD_NET */
a6477f7c CP	58
a6477f7c	59	#endif /* _CONFIG_SBX81LIFXCAT_H */