projects / J-u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| dd02936f MH |
1 | /* |
| 2 | * Copyright 2016 Freescale Semiconductor | |
| 3 | * | |
| 4 | * SPDX-License-Identifier: GPL-2.0+ | |
| 5 | */ | |
| 6 | ||
| 7 | #ifndef __LS1046ARDB_H__ | |
| 8 | #define __LS1046ARDB_H__ | |
| 9 | ||
| 10 | #include "ls1046a_common.h" | |
| 11 | ||
| dd02936f MH |
12 | #ifdef CONFIG_SD_BOOT |
| 13 | #define CONFIG_SYS_TEXT_BASE 0x82000000 | |
| 14 | #else | |
| 15 | #define CONFIG_SYS_TEXT_BASE 0x40100000 | |
| 16 | #endif | |
| 17 | ||
| 18 | #define CONFIG_SYS_CLK_FREQ 100000000 | |
| 19 | #define CONFIG_DDR_CLK_FREQ 100000000 | |
| 20 | ||
| 21 | #define CONFIG_LAYERSCAPE_NS_ACCESS | |
| 22 | #define CONFIG_MISC_INIT_R | |
| 23 | ||
| 24 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 25 | /* Physical Memory Map */ | |
| 26 | #define CONFIG_CHIP_SELECTS_PER_CTRL 4 | |
| 27 | #define CONFIG_NR_DRAM_BANKS 2 | |
| 28 | ||
| 29 | #define CONFIG_DDR_SPD | |
| 30 | #define SPD_EEPROM_ADDRESS 0x51 | |
| 31 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 32 | ||
| 33 | #define CONFIG_DDR_ECC | |
| 34 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 35 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 36 | #define CONFIG_FSL_DDR_BIST /* enable built-in memory test */ | |
| dc760aed | 37 | #ifndef CONFIG_SPL |
| dd02936f | 38 | #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ |
| dc760aed | 39 | #endif |
| dd02936f MH |
40 | |
| 41 | #ifdef CONFIG_RAMBOOT_PBL | |
| 42 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg | |
| 43 | #endif | |
| 44 | ||
| 45 | #ifdef CONFIG_SD_BOOT | |
| 46 | #ifdef CONFIG_EMMC_BOOT | |
| 47 | #define CONFIG_SYS_FSL_PBL_RCW \ | |
| 48 | board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg | |
| 49 | #else | |
| 50 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg | |
| 51 | #endif | |
| 52 | #endif | |
| 53 | ||
| dd02936f MH |
54 | /* IFC */ |
| 55 | #define CONFIG_FSL_IFC | |
| 56 | ||
| 57 | /* | |
| 58 | * NAND Flash Definitions | |
| 59 | */ | |
| 60 | #define CONFIG_NAND_FSL_IFC | |
| 61 | ||
| 62 | #define CONFIG_SYS_NAND_BASE 0x7e800000 | |
| 63 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 64 | ||
| 65 | #define CONFIG_SYS_NAND_CSPR_EXT (0x0) | |
| 66 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 67 | | CSPR_PORT_SIZE_8 \ | |
| 68 | | CSPR_MSEL_NAND \ | |
| 69 | | CSPR_V) | |
| 70 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) | |
| 71 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 72 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 73 | | CSOR_NAND_ECC_MODE_8 /* 8-bit ECC */ \ | |
| 74 | | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ | |
| 75 | | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ | |
| 76 | | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ | |
| 77 | | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ | |
| 78 | ||
| 79 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 80 | ||
| 81 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \ | |
| 82 | FTIM0_NAND_TWP(0x18) | \ | |
| 83 | FTIM0_NAND_TWCHT(0x7) | \ | |
| 84 | FTIM0_NAND_TWH(0xa)) | |
| 85 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 86 | FTIM1_NAND_TWBE(0x39) | \ | |
| 87 | FTIM1_NAND_TRR(0xe) | \ | |
| 88 | FTIM1_NAND_TRP(0x18)) | |
| 89 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \ | |
| 90 | FTIM2_NAND_TREH(0xa) | \ | |
| 91 | FTIM2_NAND_TWHRE(0x1e)) | |
| 92 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 93 | ||
| 94 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 95 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 96 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
| 97 | #define CONFIG_CMD_NAND | |
| 98 | ||
| 99 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 100 | ||
| 101 | /* | |
| 102 | * CPLD | |
| 103 | */ | |
| 104 | #define CONFIG_SYS_CPLD_BASE 0x7fb00000 | |
| 105 | #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE | |
| 106 | ||
| 107 | #define CONFIG_SYS_CPLD_CSPR_EXT (0x0) | |
| 108 | #define CONFIG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ | |
| 109 | CSPR_PORT_SIZE_8 | \ | |
| 110 | CSPR_MSEL_GPCM | \ | |
| 111 | CSPR_V) | |
| 112 | #define CONFIG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024) | |
| 113 | #define CONFIG_SYS_CPLD_CSOR CSOR_NOR_ADM_SHIFT(16) | |
| 114 | ||
| 115 | /* CPLD Timing parameters for IFC GPCM */ | |
| 116 | #define CONFIG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 117 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 118 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 119 | #define CONFIG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ | |
| 120 | FTIM1_GPCM_TRAD(0x3f)) | |
| 121 | #define CONFIG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ | |
| 122 | FTIM2_GPCM_TCH(0xf) | \ | |
| 123 | FTIM2_GPCM_TWP(0x3E)) | |
| 124 | #define CONFIG_SYS_CPLD_FTIM3 0x0 | |
| 125 | ||
| 126 | /* IFC Timing Params */ | |
| 127 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 128 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 129 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 130 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 131 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 132 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 133 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 134 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 135 | ||
| 136 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_CPLD_CSPR_EXT | |
| 137 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_CPLD_CSPR | |
| 138 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_CPLD_AMASK | |
| 139 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_CPLD_CSOR | |
| 140 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_CPLD_FTIM0 | |
| 141 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_CPLD_FTIM1 | |
| 142 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_CPLD_FTIM2 | |
| 143 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3 | |
| 144 | ||
| 145 | /* EEPROM */ | |
| 146 | #define CONFIG_ID_EEPROM | |
| 147 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 148 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 149 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 | |
| 150 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 151 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 152 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 153 | #define I2C_RETIMER_ADDR 0x18 | |
| 154 | ||
| dccef2ec HZ |
155 | /* PMIC */ |
| 156 | #define CONFIG_POWER | |
| 157 | #ifdef CONFIG_POWER | |
| 158 | #define CONFIG_POWER_I2C | |
| 159 | #endif | |
| 160 | ||
| dd02936f MH |
161 | /* |
| 162 | * Environment | |
| 163 | */ | |
| 164 | #define CONFIG_ENV_OVERWRITE | |
| 165 | ||
| 166 | #if defined(CONFIG_SD_BOOT) | |
| 167 | #define CONFIG_ENV_IS_IN_MMC | |
| 168 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 169 | #define CONFIG_ENV_OFFSET (1024 * 1024) | |
| 170 | #define CONFIG_ENV_SIZE 0x2000 | |
| 171 | #else | |
| 172 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 173 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 174 | #define CONFIG_ENV_OFFSET 0x200000 /* 2MB */ | |
| 175 | #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ | |
| 176 | #endif | |
| 177 | ||
| 178 | /* FMan */ | |
| 179 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 180 | #define CONFIG_FMAN_ENET | |
| 181 | #define CONFIG_PHYLIB | |
| 182 | #define CONFIG_PHYLIB_10G | |
| 183 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 184 | ||
| 185 | #define CONFIG_PHY_REALTEK | |
| 186 | #define CONFIG_PHY_AQUANTIA | |
| 187 | #define AQR105_IRQ_MASK 0x80000000 | |
| 188 | ||
| 189 | #define RGMII_PHY1_ADDR 0x1 | |
| 190 | #define RGMII_PHY2_ADDR 0x2 | |
| 191 | ||
| 192 | #define SGMII_PHY1_ADDR 0x3 | |
| 193 | #define SGMII_PHY2_ADDR 0x4 | |
| 194 | ||
| 195 | #define FM1_10GEC1_PHY_ADDR 0x0 | |
| 196 | ||
| 197 | #define CONFIG_ETHPRIME "FM1@DTSEC3" | |
| 198 | #endif | |
| 199 | ||
| 200 | /* QSPI device */ | |
| 201 | #ifdef CONFIG_FSL_QSPI | |
| 202 | #define CONFIG_SPI_FLASH_SPANSION | |
| 203 | #define FSL_QSPI_FLASH_SIZE (1 << 26) | |
| 204 | #define FSL_QSPI_FLASH_NUM 2 | |
| 205 | #define CONFIG_SPI_FLASH_BAR | |
| 206 | #endif | |
| 207 | ||
| 97205eea | 208 | /* USB */ |
| 209 | #define CONFIG_HAS_FSL_XHCI_USB | |
| 210 | #ifdef CONFIG_HAS_FSL_XHCI_USB | |
| 211 | #define CONFIG_USB_XHCI_HCD | |
| 212 | #define CONFIG_USB_XHCI_FSL | |
| 213 | #define CONFIG_USB_XHCI_DWC3 | |
| 214 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 | |
| 215 | #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 | |
| 216 | #define CONFIG_CMD_USB | |
| 217 | #define CONFIG_USB_STORAGE | |
| 218 | #endif | |
| 219 | ||
| dd02936f MH |
220 | /* SATA */ |
| 221 | #define CONFIG_LIBATA | |
| 222 | #define CONFIG_SCSI_AHCI | |
| 223 | #define CONFIG_SCSI_AHCI_PLAT | |
| 224 | #define CONFIG_SCSI | |
| dd02936f MH |
225 | |
| 226 | #define CONFIG_SYS_SATA AHCI_BASE_ADDR | |
| 227 | ||
| 228 | #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 | |
| 229 | #define CONFIG_SYS_SCSI_MAX_LUN 1 | |
| 230 | #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ | |
| 231 | CONFIG_SYS_SCSI_MAX_LUN) | |
| 9e0bb4c1 | 232 | |
| dd02936f MH |
233 | #define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read $kernel_load" \ |
| 234 | "$kernel_start $kernel_size;" \ | |
| 235 | "bootm $kernel_load" | |
| 236 | ||
| 237 | #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \ | |
| 238 | "15m(u-boot),48m(kernel.itb);" \ | |
| 239 | "7e800000.flash:16m(nand_uboot)," \ | |
| 240 | "48m(nand_kernel),448m(nand_free)" | |
| 241 | ||
| 242 | #endif /* __LS1046ARDB_H__ */ |