[J-u-boot.git] / include / configs / qemu-mips64.h

/*
 * (C) Copyright 2003
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * This file contains the configuration parameters for qemu-mips64 target.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_QEMU_MIPS

#define CONFIG_MISC_INIT_R

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
#undef CONFIG_BOOTARGS

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"addmisc=setenv bootargs ${bootargs} "				\
		"console=ttyS0,${baudrate} "				\
		"panic=1\0"						\
	"bootfile=/tftpboot/vmlinux\0"					\
	"load=tftp ffffffff80500000 ${u-boot}\0"			\
	""

#define CONFIG_BOOTCOMMAND	"bootp;bootelf"

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */

#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_NE2000_BASE	0xffffffffb4000300

#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		115200
#define CONFIG_SYS_NS16550_COM1		0xffffffffb40003f8
#define CONFIG_CONS_INDEX		1

#define CONFIG_CMD_IDE

#ifdef CONFIG_SYS_BIG_ENDIAN
#define CONFIG_IDE_SWAP_IO
#endif

#define CONFIG_SYS_IDE_MAXBUS		2
#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
#define CONFIG_SYS_ATA_DATA_OFFSET	0
#define CONFIG_SYS_ATA_REG_OFFSET	0
#define CONFIG_SYS_ATA_BASE_ADDR	0xffffffffb4000000

#define CONFIG_SYS_IDE_MAXDEVICE	4

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING

/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		256
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS		16

#define CONFIG_SYS_MALLOC_LEN		(256 << 10)

#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024

#define CONFIG_SYS_MHZ			132

#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)

/* Cached addr */
#define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000

/* default load address */
#define CONFIG_SYS_LOAD_ADDR		0xffffffff81000000

#define CONFIG_SYS_MEMTEST_START	0xffffffff80100000
#define CONFIG_SYS_MEMTEST_END		0xffffffff80800000

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
/* The following #defines are needed to get flash environment right */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_INIT_SP_OFFSET	0x400000

/* We boot from this flash, selected with dip switch */
#define CONFIG_SYS_FLASH_BASE		0xffffffffbfc00000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	128
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

#define CONFIG_ENV_IS_IN_FLASH

/* Address and size of Primary Environment Sector */
#define CONFIG_ENV_SIZE		0x8000
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)

#define CONFIG_ENV_OVERWRITE	1

#define MEM_SIZE		128

#define CONFIG_LZMA

#endif /* __CONFIG_H */
Commit	Line	Data
32afad78 ZZ	1	/*
	2	* (C) Copyright 2003
	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
32afad78 ZZ	6	*/
	7
	8	/*
	9	* This file contains the configuration parameters for qemu-mips64 target.
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
32afad78	15	#define CONFIG_QEMU_MIPS
bdb53cf0	16
32afad78 ZZ	17	#define CONFIG_MISC_INIT_R
32afad78 ZZ	18
32afad78 ZZ	19	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	20	#undef CONFIG_BOOTARGS
	21
	22	#define CONFIG_EXTRA_ENV_SETTINGS \
	23	"addmisc=setenv bootargs ${bootargs} " \
	24	"console=ttyS0,${baudrate} " \
	25	"panic=1\0" \
	26	"bootfile=/tftpboot/vmlinux\0" \
	27	"load=tftp ffffffff80500000 ${u-boot}\0" \
	28	""
	29
	30	#define CONFIG_BOOTCOMMAND "bootp;bootelf"
	31
	32	/*
	33	* BOOTP options
	34	*/
	35	#define CONFIG_BOOTP_BOOTFILESIZE
	36	#define CONFIG_BOOTP_BOOTPATH
	37	#define CONFIG_BOOTP_GATEWAY
	38	#define CONFIG_BOOTP_HOSTNAME
	39
	40	/*
	41	* Command line configuration.
	42	*/
32afad78 ZZ	43
	44	#define CONFIG_DRIVER_NE2000
	45	#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300
	46
32afad78 ZZ	47	#define CONFIG_SYS_NS16550_SERIAL
	48	#define CONFIG_SYS_NS16550_REG_SIZE 1
	49	#define CONFIG_SYS_NS16550_CLK 115200
	50	#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8
	51	#define CONFIG_CONS_INDEX 1
	52
	53	#define CONFIG_CMD_IDE
32afad78	54
713a9e15 SG	55	#ifdef CONFIG_SYS_BIG_ENDIAN
	56	#define CONFIG_IDE_SWAP_IO
	57	#endif
	58
32afad78 ZZ	59	#define CONFIG_SYS_IDE_MAXBUS 2
	60	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
	61	#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
	62	#define CONFIG_SYS_ATA_DATA_OFFSET 0
	63	#define CONFIG_SYS_ATA_REG_OFFSET 0
	64	#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000
	65
	66	#define CONFIG_SYS_IDE_MAXDEVICE 4
	67
32afad78 ZZ	68	/*
	69	* Miscellaneous configurable options
	70	*/
	71	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	72
32afad78 ZZ	73	#define CONFIG_AUTO_COMPLETE
32afad78 ZZ	74	#define CONFIG_CMDLINE_EDITING
32afad78 ZZ	75
	76	/* Console I/O Buffer Size */
	77	#define CONFIG_SYS_CBSIZE 256
	78	/* Print Buffer Size */
	79	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	80	/* max number of command args */
	81	#define CONFIG_SYS_MAXARGS 16
	82
1967228b	83	#define CONFIG_SYS_MALLOC_LEN (256 << 10)
32afad78 ZZ	84
	85	#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
	86
	87	#define CONFIG_SYS_MHZ 132
	88
	89	#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
	90
32afad78 ZZ	91	/* Cached addr */
	92	#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
	93
	94	/* default load address */
	95	#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000
	96
	97	#define CONFIG_SYS_MEMTEST_START 0xffffffff80100000
	98	#define CONFIG_SYS_MEMTEST_END 0xffffffff80800000
	99
	100	/*-----------------------------------------------------------------------
	101	* FLASH and environment organization
	102	*/
	103	/* The following #defines are needed to get flash environment right */
32afad78	104	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
32afad78 ZZ	105
	106	#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
	107
	108	/* We boot from this flash, selected with dip switch */
	109	#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000
	110	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	111	#define CONFIG_SYS_MAX_FLASH_SECT 128
	112	#define CONFIG_SYS_FLASH_CFI
	113	#define CONFIG_FLASH_CFI_DRIVER
	114	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	115
	116	#define CONFIG_ENV_IS_IN_FLASH
32afad78 ZZ	117
	118	/* Address and size of Primary Environment Sector */
	119	#define CONFIG_ENV_SIZE 0x8000
9828d050	120	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
32afad78 ZZ	121
	122	#define CONFIG_ENV_OVERWRITE 1
	123
	124	#define MEM_SIZE 128
	125
	126	#define CONFIG_LZMA
	127
32afad78	128	#endif /* __CONFIG_H */