[J-u-boot.git] / include / configs / m28evk.h

/*
 * Copyright (C) 2011 Marek Vasut <[email protected]>
 * on behalf of DENX Software Engineering GmbH
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __CONFIGS_M28EVK_H__
#define __CONFIGS_M28EVK_H__


/* System configurations */
#define CONFIG_MX28				/* i.MX28 SoC */
#define MACH_TYPE_M28EVK	3613
#define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK

/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
#include <config_cmd_default.h>
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
#define	CONFIG_VIDEO

#define CONFIG_REGEX			/* Enable regular expression support */

/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
#define PHYS_SDRAM_1			0x40000000	/* Base address */
#define PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

/* Environment */
#define CONFIG_ENV_SIZE			(16 * 1024)
#define CONFIG_ENV_IS_IN_NAND

/* Environment is in NAND */
#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
#define CONFIG_ENV_RANGE		(512 * 1024)
#define CONFIG_ENV_OFFSET		0x300000
#define CONFIG_ENV_OFFSET_REDUND	\
		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)

#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT			\
	"mtdparts=gpmi-nand:"			\
		"3m(bootloader)ro,"		\
		"512k(environment),"		\
		"512k(redundant-environment),"	\
		"4m(kernel),"			\
		"128k(fdt),"			\
		"8m(ramdisk),"			\
		"-(filesystem)"
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

/* FEC Ethernet on SoC */
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#endif

/* EEPROM */
#ifdef CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#endif

/* RTC */
#ifdef CONFIG_CMD_DATE
/* Use the internal RTC in the MXS chip */
#define CONFIG_RTC_INTERNAL
#ifdef CONFIG_RTC_INTERNAL
#define CONFIG_RTC_MXS
#else
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR		0x68
#define CONFIG_SYS_M41T11_BASE_YEAR	2000
#endif
#endif

/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_EHCI_MXS_PORT1
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#define CONFIG_USB_STORAGE
#endif

/* SPI */
#ifdef CONFIG_CMD_SPI
#define CONFIG_DEFAULT_SPI_BUS		2
#define CONFIG_DEFAULT_SPI_CS		0
#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0

/* SPI FLASH */
#ifdef CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SF_DEFAULT_BUS		2
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		40000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0

#define CONFIG_ENV_SPI_BUS		2
#define CONFIG_ENV_SPI_CS		0
#define CONFIG_ENV_SPI_MAX_HZ		40000000
#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
#endif

#endif

/* LCD */
#ifdef CONFIG_VIDEO
#define	CONFIG_VIDEO_LOGO
#define	CONFIG_SPLASH_SCREEN
#define	CONFIG_CMD_BMP
#define	CONFIG_BMP_16BPP
#define	CONFIG_VIDEO_BMP_RLE8
#define	CONFIG_VIDEO_BMP_GZIP
#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(512 << 10)
#endif

/* Booting Linux */
#define CONFIG_BOOTDELAY	3
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
#define CONFIG_BOOTCOMMAND	"run bootcmd_net"
#define CONFIG_LOADADDR		0x42000000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"update_nand_full_filename=u-boot.nand\0"			\
	"update_nand_firmware_filename=u-boot.sb\0"			\
	"update_sd_firmware_filename=u-boot.sd\0"			\
	"update_nand_firmware_maxsz=0x100000\0"				\
	"update_nand_stride=0x40\0"	/* MX28 datasheet ch. 12.12 */	\
	"update_nand_count=0x4\0"	/* MX28 datasheet ch. 12.12 */	\
	"update_nand_get_fcb_size="	/* Get size of FCB blocks */	\
		"nand device 0 ; "					\
		"nand info ; "						\
		"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
		"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
	"update_nand_full="		/* Update FCB, DBBT and FW */	\
		"if tftp ${update_nand_full_filename} ; then "		\
		"run update_nand_get_fcb_size ; "			\
		"nand scrub -y 0x0 ${filesize} ; "			\
		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "	\
		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
		"fi\0"							\
	"update_nand_firmware="		/* Update only firmware */	\
		"if tftp ${update_nand_firmware_filename} ; then "	\
		"run update_nand_get_fcb_size ; "			\
		"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
		"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; "	\
		"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
		"nand erase ${fcb_sz} ${fw_sz} ; "			\
		"nand write ${loadaddr} ${fcb_sz} ${filesize} ; "	\
		"nand write ${loadaddr} ${fw_off} ${filesize} ; "	\
		"fi\0"							\
	"update_sd_firmware="		/* Update the SD firmware partition */ \
		"if mmc rescan ; then "					\
		"if tftp ${update_sd_firmware_filename} ; then "	\
		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
		"setexpr fw_sz ${fw_sz} + 1 ; "				\
		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
		"fi ; "							\
		"fi\0"

/* The rest of the configuration is shared */
#include <configs/mxs.h>

#endif /* __CONFIGS_M28EVK_H__ */
Commit	Line	Data
fc102728 MV	1	/*
	2	* Copyright (C) 2011 Marek Vasut <[email protected]>
	3	* on behalf of DENX Software Engineering GmbH
	4	*
3765b3e7	5	* SPDX-License-Identifier: GPL-2.0+
fc102728	6	*/
5434caf5 MV	7	#ifndef __CONFIGS_M28EVK_H__
5434caf5 MV	8	#define __CONFIGS_M28EVK_H__
fc102728	9
fc102728	10
5434caf5 MV	11	/* System configurations */
5434caf5 MV	12	#define CONFIG_MX28 /* i.MX28 SoC */
5f71bca7	13	#define MACH_TYPE_M28EVK 3613
5f71bca7	14	#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
fc102728	15
5434caf5	16	/* U-Boot Commands */
5f71bca7	17	#define CONFIG_SYS_NO_FLASH
fc102728	18	#include <config_cmd_default.h>
5f71bca7 WD	19	#define CONFIG_DISPLAY_CPUINFO
5f71bca7 WD	20	#define CONFIG_DOS_PARTITION
fc102728	21
5f71bca7 WD	22	#define CONFIG_CMD_CACHE
	23	#define CONFIG_CMD_DATE
	24	#define CONFIG_CMD_DHCP
	25	#define CONFIG_CMD_EEPROM
	26	#define CONFIG_CMD_EXT2
	27	#define CONFIG_CMD_FAT
	28	#define CONFIG_CMD_GPIO
ee747a21	29	#define CONFIG_CMD_GREPENV
5f71bca7 WD	30	#define CONFIG_CMD_I2C
	31	#define CONFIG_CMD_MII
	32	#define CONFIG_CMD_MMC
	33	#define CONFIG_CMD_NAND
32cc24d3	34	#define CONFIG_CMD_NAND_TRIMFFS
5f71bca7 WD	35	#define CONFIG_CMD_NET
	36	#define CONFIG_CMD_NFS
	37	#define CONFIG_CMD_PING
	38	#define CONFIG_CMD_SETEXPR
	39	#define CONFIG_CMD_SF
	40	#define CONFIG_CMD_SPI
	41	#define CONFIG_CMD_USB
d782c1fe	42	#define CONFIG_VIDEO
fc102728	43
ee747a21 WD	44	#define CONFIG_REGEX /* Enable regular expression support */
ee747a21 WD	45
5434caf5	46	/* Memory configuration */
5f71bca7 WD	47	#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
	48	#define PHYS_SDRAM_1 0x40000000 /* Base address */
	49	#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
5f71bca7	50	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
fc102728	51
5434caf5	52	/* Environment */
5f71bca7	53	#define CONFIG_ENV_SIZE (16 * 1024)
5434caf5	54	#define CONFIG_ENV_IS_IN_NAND
fc102728 MV	55
fc102728 MV	56	/* Environment is in NAND */
5434caf5	57	#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
5f71bca7 WD	58	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	59	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	60	#define CONFIG_ENV_RANGE (512 * 1024)
	61	#define CONFIG_ENV_OFFSET 0x300000
	62	#define CONFIG_ENV_OFFSET_REDUND \
fc102728 MV	63	(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
fc102728 MV	64
5f71bca7 WD	65	#define CONFIG_CMD_UBI
	66	#define CONFIG_CMD_UBIFS
	67	#define CONFIG_CMD_MTDPARTS
	68	#define CONFIG_RBTREE
	69	#define CONFIG_LZO
	70	#define CONFIG_MTD_DEVICE
	71	#define CONFIG_MTD_PARTITIONS
	72	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	73	#define MTDPARTS_DEFAULT \
c16ecb09	74	"mtdparts=gpmi-nand:" \
fc102728 MV	75	"3m(bootloader)ro," \
	76	"512k(environment)," \
	77	"512k(redundant-environment)," \
	78	"4m(kernel)," \
1f75b541 MV	79	"128k(fdt)," \
1f75b541 MV	80	"8m(ramdisk)," \
fc102728	81	"-(filesystem)"
c660a541	82	#else
5f71bca7	83	#define CONFIG_ENV_IS_NOWHERE
fc102728 MV	84	#endif
fc102728 MV	85
5434caf5 MV	86	/* FEC Ethernet on SoC */
5434caf5 MV	87	#ifdef CONFIG_CMD_NET
5f71bca7	88	#define CONFIG_FEC_MXC
fc102728 MV	89	#endif
fc102728 MV	90
5434caf5 MV	91	/* EEPROM */
5434caf5 MV	92	#ifdef CONFIG_CMD_EEPROM
5f71bca7 WD	93	#define CONFIG_SYS_I2C_MULTI_EEPROMS
5f71bca7 WD	94	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
fc102728 MV	95	#endif
fc102728 MV	96
5434caf5 MV	97	/* RTC */
5434caf5 MV	98	#ifdef CONFIG_CMD_DATE
fc102728	99	/* Use the internal RTC in the MXS chip */
5f71bca7	100	#define CONFIG_RTC_INTERNAL
5434caf5	101	#ifdef CONFIG_RTC_INTERNAL
5f71bca7	102	#define CONFIG_RTC_MXS
fc102728	103	#else
5f71bca7 WD	104	#define CONFIG_RTC_M41T62
	105	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	106	#define CONFIG_SYS_M41T11_BASE_YEAR 2000
fc102728 MV	107	#endif
	108	#endif
	109
5434caf5 MV	110	/* USB */
5434caf5 MV	111	#ifdef CONFIG_CMD_USB
afa87210 MV	112	#define CONFIG_EHCI_MXS_PORT0
	113	#define CONFIG_EHCI_MXS_PORT1
	114	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
5f71bca7	115	#define CONFIG_USB_STORAGE
8f59bc1f MV	116	#endif
8f59bc1f MV	117
5434caf5 MV	118	/* SPI */
5434caf5 MV	119	#ifdef CONFIG_CMD_SPI
5f71bca7 WD	120	#define CONFIG_DEFAULT_SPI_BUS 2
	121	#define CONFIG_DEFAULT_SPI_CS 0
	122	#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
fc102728 MV	123
fc102728 MV	124	/* SPI FLASH */
5434caf5	125	#ifdef CONFIG_CMD_SF
5f71bca7 WD	126	#define CONFIG_SPI_FLASH
	127	#define CONFIG_SPI_FLASH_STMICRO
	128	#define CONFIG_SF_DEFAULT_BUS 2
	129	#define CONFIG_SF_DEFAULT_CS 0
	130	#define CONFIG_SF_DEFAULT_SPEED 40000000
	131	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
fc102728	132
5f71bca7 WD	133	#define CONFIG_ENV_SPI_BUS 2
	134	#define CONFIG_ENV_SPI_CS 0
	135	#define CONFIG_ENV_SPI_MAX_HZ 40000000
	136	#define CONFIG_ENV_SPI_MODE SPI_MODE_0
fc102728	137	#endif
5434caf5	138
fc102728 MV	139	#endif
fc102728 MV	140
5434caf5 MV	141	/* LCD */
5434caf5 MV	142	#ifdef CONFIG_VIDEO
d782c1fe	143	#define CONFIG_VIDEO_LOGO
d782c1fe MV	144	#define CONFIG_SPLASH_SCREEN
	145	#define CONFIG_CMD_BMP
	146	#define CONFIG_BMP_16BPP
	147	#define CONFIG_VIDEO_BMP_RLE8
	148	#define CONFIG_VIDEO_BMP_GZIP
	149	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10)
	150	#endif
	151
5434caf5	152	/* Booting Linux */
5f71bca7 WD	153	#define CONFIG_BOOTDELAY 3
	154	#define CONFIG_BOOTFILE "uImage"
	155	#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
	156	#define CONFIG_BOOTCOMMAND "run bootcmd_net"
	157	#define CONFIG_LOADADDR 0x42000000
	158	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
fc102728	159
5434caf5	160	/* Extra Environment */
5f71bca7	161	#define CONFIG_EXTRA_ENV_SETTINGS \
fc102728 MV	162	"update_nand_full_filename=u-boot.nand\0" \
fc102728 MV	163	"update_nand_firmware_filename=u-boot.sb\0" \
9a0f98d3	164	"update_sd_firmware_filename=u-boot.sd\0" \
fc102728 MV	165	"update_nand_firmware_maxsz=0x100000\0" \
	166	"update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
	167	"update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
	168	"update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
	169	"nand device 0 ; " \
	170	"nand info ; " \
	171	"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
	172	"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
	173	"update_nand_full=" /* Update FCB, DBBT and FW */ \
	174	"if tftp ${update_nand_full_filename} ; then " \
	175	"run update_nand_get_fcb_size ; " \
	176	"nand scrub -y 0x0 ${filesize} ; " \
71779d5b	177	"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
fc102728 MV	178	"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
	179	"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
	180	"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
	181	"fi\0" \
	182	"update_nand_firmware=" /* Update only firmware */ \
	183	"if tftp ${update_nand_firmware_filename} ; then " \
	184	"run update_nand_get_fcb_size ; " \
	185	"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
	186	"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
	187	"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
	188	"nand erase ${fcb_sz} ${fw_sz} ; " \
	189	"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
	190	"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
9a0f98d3 MV	191	"fi\0" \
	192	"update_sd_firmware=" /* Update the SD firmware partition */ \
	193	"if mmc rescan ; then " \
	194	"if tftp ${update_sd_firmware_filename} ; then " \
	195	"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
	196	"setexpr fw_sz ${fw_sz} + 1 ; " \
	197	"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
	198	"fi ; " \
fc102728 MV	199	"fi\0"
fc102728 MV	200
5434caf5 MV	201	/* The rest of the configuration is shared */
	202	#include <configs/mxs.h>
	203
	204	#endif /* __CONFIGS_M28EVK_H__ */