[J-u-boot.git] / include / configs / DU405.h

/*
 * (C) Copyright 2001
 * Stefan Roese, esd gmbh germany, [email protected]
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_IDENT_STRING     " $Name:  $"

#define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_DU405		1	/* ...on a DU405 board		*/

#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
#define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */

#define CONFIG_SYS_CLK_FREQ	25000000 /* external frequency to pll	*/

#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND	"bootm fff00000"

#define CONFIG_PREBOOT                  /* enable preboot variable      */

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0	/* PHY address			*/
#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PCI
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_IDE
#define CONFIG_CMD_ELF
#define CONFIG_CMD_MII
#define CONFIG_CMD_DATE
#define CONFIG_CMD_EEPROM


#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

#define CONFIG_RTC_MC146818		/* BQ3285 is MC146818 compatible*/
#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000080 /* RTC Base Address		*/

#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200  /* use external serial clock	*/

/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
#define PCI_HOST_FORCE	1		/* configure as pci host	*/
#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/

#define CONFIG_PCI			/* include pci support		*/
#define CONFIG_PCI_HOST PCI_HOST_AUTO	/* select pci host function	*/
#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
					/* resource configuration	*/

#define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/

#define CONFIG_PCI_BOOTDELAY	0	/* enable pci bootdelay variable*/

#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0404	/* PCI Device ID: CPCI-ISER4	*/
#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
#define CONFIG_SYS_PCI_PTM1MS	0xff000001	/* 16MB, enable hard-wired to 1 */
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
#define CONFIG_SYS_PCI_PTM2LA	0xffe00000	/* point to flash		*/
#define CONFIG_SYS_PCI_PTM2MS	0xffe00001	/* 2MB, enable			*/
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/

/*-----------------------------------------------------------------------
 * IDE/ATA stuff
 *-----------------------------------------------------------------------
 */
#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
#undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/

#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */

#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000

#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
/*
 * The following defines are added for buggy IOP480 byte interface.
 * All other boards should use the standard values (CPCI405 etc.)
 */
#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/

#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

/*-----------------------------------------------------------------------
 * I2C EEPROM (CAT24WC08) for environment
 */
#define CONFIG_HARD_I2C			/* I2c with hardware support */
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
					/* 16 byte page write mode using*/
					/* last 4 bits of the address	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
				   /* total size of a CAT24WC08 is 1024 bytes */

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0xFFC00000	/* FLASH bank #1	*/

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 */

#define FLASH0_BA	0xFFC00000	    /* FLASH 0 Base Address		*/
#define FLASH1_BA	0xFF800000	    /* FLASH 1 Base Address		*/
#define CAN_BA		0xF0000000	    /* CAN Base Address			*/
#define DUART_BA	0xF0300000	    /* DUART Base Address		*/
#define CF_BA		0xF0100000	    /* CompactFlash Base Address	*/
#define SRAM_BA		0xF0200000	    /* SRAM Base Address		*/
#define DURAG_IO_BA	0xF0400000	    /* DURAG Bus IO Base Address	*/
#define DURAG_MEM_BA	0xF0500000	    /* DURAG Bus Mem Base Address	*/

#define FPGA_MODE_REG	(DUART_BA+0x80)	    /* FPGA Mode Register		*/

/* Memory Bank 0 (Flash Bank 0) initialization					*/
#define CONFIG_SYS_EBC_PB0AP	0x92015480
#define CONFIG_SYS_EBC_PB0CR	FLASH0_BA | 0x5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 1 (Flash Bank 1) initialization					*/
#define CONFIG_SYS_EBC_PB1AP	0x92015480
#define CONFIG_SYS_EBC_PB1CR	FLASH1_BA | 0x5A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 2 (CAN0) initialization						*/
#define CONFIG_SYS_EBC_PB2AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB2CR	CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 3 (DUART) initialization						*/
#define CONFIG_SYS_EBC_PB3AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB3CR	DUART_BA | 0x18000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 4 (CompactFlash IDE) initialization				*/
#define CONFIG_SYS_EBC_PB4AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB4CR	CF_BA | 0x1A000	    /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */

/* Memory Bank 5 (SRAM) initialization						*/
#define CONFIG_SYS_EBC_PB5AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB5CR	SRAM_BA | 0x1A000   /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */

/* Memory Bank 6 (DURAG Bus IO Space) initialization				*/
#define CONFIG_SYS_EBC_PB6AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB6CR	DURAG_IO_BA | 0x18000 /* BAS=0xF04,BS=1MB,BU=R/W,BW=8bit*/

/* Memory Bank 7 (DURAG Bus Mem Space) initialization				*/
#define CONFIG_SYS_EBC_PB7AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB7CR	DURAG_MEM_BA | 0x18000 /* BAS=0xF05,BS=1MB,BU=R/W,BW=8bit */


/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */

/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
#define CONFIG_SYS_TEMP_STACK_OCM	  1

/* On Chip Memory location */
#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000

#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
c609719b WD	1	/*
	2	* (C) Copyright 2001
	3	* Stefan Roese, esd gmbh germany, [email protected]
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
82f4c6ac	35	#define CONFIG_IDENT_STRING " $Name: $"
c609719b WD	36
c609719b WD	37	#define CONFIG_405GP 1 /* This is a PPC405 CPU */
c837dcb1 WD	38	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
c837dcb1 WD	39	#define CONFIG_DU405 1 /* ...on a DU405 board */
c609719b	40
c837dcb1	41	#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
82f4c6ac	42	#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
c609719b	43
c837dcb1	44	#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
c609719b WD	45
	46	#define CONFIG_BAUDRATE 9600
	47	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	48
	49	#undef CONFIG_BOOTARGS
	50	#define CONFIG_BOOTCOMMAND "bootm fff00000"
	51
a20b27a3 SR	52	#define CONFIG_PREBOOT /* enable preboot variable */
a20b27a3 SR	53
c609719b	54	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	55	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
c609719b WD	56
c609719b WD	57	#define CONFIG_MII 1 /* MII PHY management */
c837dcb1	58	#define CONFIG_PHY_ADDR 0 /* PHY address */
a20b27a3	59	#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
c609719b	60
3c3227f3	61
11799434 JL	62	/*
	63	* BOOTP options
	64	*/
	65	#define CONFIG_BOOTP_BOOTFILESIZE
	66	#define CONFIG_BOOTP_BOOTPATH
	67	#define CONFIG_BOOTP_GATEWAY
	68	#define CONFIG_BOOTP_HOSTNAME
	69
	70
3c3227f3 JL	71	/*
	72	* Command line configuration.
	73	*/
	74	#include <config_cmd_default.h>
	75
	76	#define CONFIG_CMD_PCI
	77	#define CONFIG_CMD_IRQ
	78	#define CONFIG_CMD_IDE
	79	#define CONFIG_CMD_ELF
	80	#define CONFIG_CMD_MII
	81	#define CONFIG_CMD_DATE
	82	#define CONFIG_CMD_EEPROM
	83
c609719b WD	84
	85	#define CONFIG_MAC_PARTITION
	86	#define CONFIG_DOS_PARTITION
	87
c609719b WD	88	#undef CONFIG_WATCHDOG /* watchdog disabled */
c609719b WD	89
c837dcb1	90	#define CONFIG_RTC_MC146818 /* BQ3285 is MC146818 compatible*/
6d0f6bcf	91	#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000080 /* RTC Base Address */
c609719b	92
c837dcb1	93	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
c609719b WD	94
	95	/*
	96	* Miscellaneous configurable options
	97	*/
6d0f6bcf JCPV	98	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	99	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
3c3227f3	100	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	101	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
c609719b	102	#else
6d0f6bcf	103	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
c609719b	104	#endif
6d0f6bcf JCPV	105	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	106	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	107	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
c609719b	108
6d0f6bcf	109	#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
c609719b	110
6d0f6bcf JCPV	111	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	112	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
c609719b	113
6d0f6bcf	114	#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* use external serial clock */
c609719b WD	115
c609719b WD	116	/* The following table includes the supported baudrates */
6d0f6bcf	117	#define CONFIG_SYS_BAUDRATE_TABLE \
8bde7f77 WD	118	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
8bde7f77 WD	119	57600, 115200, 230400, 460800, 921600 }
c609719b	120
6d0f6bcf JCPV	121	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	122	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
c609719b	123
6d0f6bcf	124	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
c609719b WD	125
	126	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	127
6d0f6bcf	128	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
a20b27a3	129
c609719b WD	130	/*-----------------------------------------------------------------------
	131	* PCI stuff
	132	*-----------------------------------------------------------------------
	133	*/
c837dcb1 WD	134	#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
	135	#define PCI_HOST_FORCE 1 /* configure as pci host */
	136	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
c609719b	137
c837dcb1 WD	138	#define CONFIG_PCI /* include pci support */
	139	#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
	140	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	141	/* resource configuration */
c609719b	142
c837dcb1	143	#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
ad10dd9a	144
c837dcb1	145	#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
ad10dd9a	146
6d0f6bcf JCPV	147	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
	148	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0404 /* PCI Device ID: CPCI-ISER4 */
	149	#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
	150	#define CONFIG_SYS_PCI_PTM1MS 0xff000001 /* 16MB, enable hard-wired to 1 */
	151	#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	152	#define CONFIG_SYS_PCI_PTM2LA 0xffe00000 /* point to flash */
	153	#define CONFIG_SYS_PCI_PTM2MS 0xffe00001 /* 2MB, enable */
	154	#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
c609719b WD	155
	156	/*-----------------------------------------------------------------------
	157	* IDE/ATA stuff
	158	*-----------------------------------------------------------------------
	159	*/
c837dcb1 WD	160	#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
	161	#undef CONFIG_IDE_LED /* no led for ide supported */
	162	#undef CONFIG_IDE_RESET /* no reset for ide supported */
c609719b	163
6d0f6bcf JCPV	164	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */
6d0f6bcf JCPV	165	#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS1) / max. 1 drives per IDE bus */
c609719b	166
6d0f6bcf JCPV	167	#define CONFIG_SYS_ATA_BASE_ADDR 0xF0100000
6d0f6bcf JCPV	168	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
c609719b	169
6d0f6bcf JCPV	170	#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
	171	#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
	172	#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
c609719b WD	173
	174	/*-----------------------------------------------------------------------
	175	* Start addresses for the final memory configuration
	176	* (Set up by the startup code)
6d0f6bcf	177	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
c609719b	178	*/
6d0f6bcf JCPV	179	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	180	#define CONFIG_SYS_FLASH_BASE 0xFFFD0000
	181	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	182	#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
	183	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
c609719b WD	184
	185	/*
	186	* For booting Linux, the board info and command line data
	187	* have to be in the first 8 MB of memory, since this is
	188	* the maximum mapped by the Linux kernel during initialization.
	189	*/
6d0f6bcf	190	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
c609719b WD	191	/*-----------------------------------------------------------------------
	192	* FLASH organization
	193	*/
6d0f6bcf JCPV	194	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
6d0f6bcf JCPV	195	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
c609719b	196
6d0f6bcf JCPV	197	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	198	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
c609719b	199
6d0f6bcf JCPV	200	#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
	201	#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
	202	#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
c609719b WD	203	/*
	204	* The following defines are added for buggy IOP480 byte interface.
	205	* All other boards should use the standard values (CPCI405 etc.)
	206	*/
6d0f6bcf JCPV	207	#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
	208	#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
	209	#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
c609719b	210
6d0f6bcf	211	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
c609719b WD	212
	213	/*-----------------------------------------------------------------------
	214	* I2C EEPROM (CAT24WC08) for environment
	215	*/
	216	#define CONFIG_HARD_I2C /* I2c with hardware support */
6d0f6bcf JCPV	217	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
6d0f6bcf JCPV	218	#define CONFIG_SYS_I2C_SLAVE 0x7F
c609719b	219
6d0f6bcf JCPV	220	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
6d0f6bcf JCPV	221	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
c837dcb1	222	/* mask of address bits that overflow into the "EEPROM chip address" */
6d0f6bcf JCPV	223	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
6d0f6bcf JCPV	224	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
c609719b	225	/* 16 byte page write mode using*/
c837dcb1	226	/* last 4 bits of the address */
6d0f6bcf	227	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
c609719b	228
bb1f8b4f	229	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
0e8d1586 JCPV	230	#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
0e8d1586 JCPV	231	#define CONFIG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars */
8bde7f77	232	/* total size of a CAT24WC08 is 1024 bytes */
c609719b	233
c609719b WD	234	/*
	235	* Init Memory Controller:
	236	*
	237	* BR0/1 and OR0/1 (FLASH)
	238	*/
	239
	240	#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
	241	#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
	242
	243	/*-----------------------------------------------------------------------
	244	* External Bus Controller (EBC) Setup
	245	*/
	246
c837dcb1 WD	247	#define FLASH0_BA 0xFFC00000 /* FLASH 0 Base Address */
	248	#define FLASH1_BA 0xFF800000 /* FLASH 1 Base Address */
	249	#define CAN_BA 0xF0000000 /* CAN Base Address */
	250	#define DUART_BA 0xF0300000 /* DUART Base Address */
	251	#define CF_BA 0xF0100000 /* CompactFlash Base Address */
	252	#define SRAM_BA 0xF0200000 /* SRAM Base Address */
	253	#define DURAG_IO_BA 0xF0400000 /* DURAG Bus IO Base Address */
	254	#define DURAG_MEM_BA 0xF0500000 /* DURAG Bus Mem Base Address */
c609719b	255
c837dcb1	256	#define FPGA_MODE_REG (DUART_BA+0x80) /* FPGA Mode Register */
c609719b	257
c837dcb1	258	/* Memory Bank 0 (Flash Bank 0) initialization */
6d0f6bcf JCPV	259	#define CONFIG_SYS_EBC_PB0AP 0x92015480
6d0f6bcf JCPV	260	#define CONFIG_SYS_EBC_PB0CR FLASH0_BA \| 0x5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
c609719b	261
c837dcb1	262	/* Memory Bank 1 (Flash Bank 1) initialization */
6d0f6bcf JCPV	263	#define CONFIG_SYS_EBC_PB1AP 0x92015480
6d0f6bcf JCPV	264	#define CONFIG_SYS_EBC_PB1CR FLASH1_BA \| 0x5A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
c609719b	265
c837dcb1	266	/* Memory Bank 2 (CAN0) initialization */
6d0f6bcf JCPV	267	#define CONFIG_SYS_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	268	#define CONFIG_SYS_EBC_PB2CR CAN_BA \| 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
c609719b	269
c837dcb1	270	/* Memory Bank 3 (DUART) initialization */
6d0f6bcf JCPV	271	#define CONFIG_SYS_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	272	#define CONFIG_SYS_EBC_PB3CR DUART_BA \| 0x18000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
c609719b	273
c837dcb1	274	/* Memory Bank 4 (CompactFlash IDE) initialization */
6d0f6bcf JCPV	275	#define CONFIG_SYS_EBC_PB4AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	276	#define CONFIG_SYS_EBC_PB4CR CF_BA \| 0x1A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
c609719b	277
c837dcb1	278	/* Memory Bank 5 (SRAM) initialization */
6d0f6bcf JCPV	279	#define CONFIG_SYS_EBC_PB5AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	280	#define CONFIG_SYS_EBC_PB5CR SRAM_BA \| 0x1A000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
c609719b	281
c837dcb1	282	/* Memory Bank 6 (DURAG Bus IO Space) initialization */
6d0f6bcf JCPV	283	#define CONFIG_SYS_EBC_PB6AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	284	#define CONFIG_SYS_EBC_PB6CR DURAG_IO_BA \| 0x18000 /* BAS=0xF04,BS=1MB,BU=R/W,BW=8bit*/
c609719b	285
c837dcb1	286	/* Memory Bank 7 (DURAG Bus Mem Space) initialization */
6d0f6bcf JCPV	287	#define CONFIG_SYS_EBC_PB7AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	288	#define CONFIG_SYS_EBC_PB7CR DURAG_MEM_BA \| 0x18000 /* BAS=0xF05,BS=1MB,BU=R/W,BW=8bit */
c609719b WD	289
	290
	291	/*-----------------------------------------------------------------------
	292	* Definitions for initial stack pointer and data area (in DPRAM)
	293	*/
	294
	295	/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
6d0f6bcf	296	#define CONFIG_SYS_TEMP_STACK_OCM 1
c609719b WD	297
c609719b WD	298	/* On Chip Memory location */
6d0f6bcf JCPV	299	#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
	300	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
	301
	302	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
	303	#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
	304	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	305	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	306	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
c609719b WD	307
	308
	309	/*
	310	* Internal Definitions
	311	*
	312	* Boot Flags
	313	*/
	314	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	315	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	316
	317	#endif /* __CONFIG_H */