[J-u-boot.git] / include / configs / WUH405.h

/*
 * (C) Copyright 2004
 * Stefan Roese, esd gmbh germany, [email protected]
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_IDENT_STRING     " $Name:  $"

#define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
#define CONFIG_WUH405		1	/* ...on a WUH405 board		*/

#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000

#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
#define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/

#define CONFIG_SYS_CLK_FREQ	33333300 /* external frequency to pll	*/

#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

#undef	CONFIG_BOOTARGS
#undef  CONFIG_BOOTCOMMAND

#define CONFIG_PREBOOT                  /* enable preboot variable      */

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0	/* PHY address			*/
#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */

#define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_ELF
#define CONFIG_CMD_NAND
#define CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_EEPROM


#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/

#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/

#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/

#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define CONFIG_CONS_INDEX	2	/* Use UART1			*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()

#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
#define CONFIG_SYS_BASE_BAUD	    691200

/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */

#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */

#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */

/*-----------------------------------------------------------------------
 * NAND-FLASH stuff
 *-----------------------------------------------------------------------
 */
#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
#define NAND_BIG_DELAY_US	25

#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */

#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0		/* configure as pci adapter	*/
#define PCI_HOST_FORCE	1		/* configure as pci host	*/
#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/

#define CONFIG_PCI			/* include pci support		*/
#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_HOST	/* select pci host function	*/
#undef	CONFIG_PCI_PNP			/* do pci plug-and-play		*/
					/* resource configuration	*/

#undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/

#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/

#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
/*
 * The following defines are added for buggy IOP480 byte interface.
 * All other boards should use the standard values (CPCI405 etc.)
 */
#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/

#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

#if 0 /* test-only */
#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
#endif

/*-----------------------------------------------------------------------
 * Environment Variable setup
 */
#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
				   /* total size of a CAT24WC16 is 2048 bytes */

#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/

/*-----------------------------------------------------------------------
 * I2C EEPROM (CAT24WC16) for environment
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_PPC4XX
#define CONFIG_SYS_I2C_PPC4XX_CH0
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
					/* 16 byte page write mode using*/
					/* last 4 bits of the address	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 */

/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
#define CONFIG_SYS_EBC_PB0AP		0x92015480
/*#define CONFIG_SYS_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
#define CONFIG_SYS_EBC_PB1AP		0x92015480
#define CONFIG_SYS_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization	*/
#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */

#define CAN_BA		0xF0000000	    /* CAN Base Address			*/
#define DUART0_BA	0xF0000400	    /* DUART Base Address		*/
#define DUART1_BA	0xF0000408	    /* DUART Base Address		*/
#define DUART2_BA	0xF0000410	    /* DUART Base Address		*/
#define DUART3_BA	0xF0000418	    /* DUART Base Address		*/
#define RTC_BA		0xF0000500	    /* RTC Base Address			*/
#define CONFIG_SYS_NAND_BASE	0xF4000000

/*-----------------------------------------------------------------------
 * FPGA stuff
 */
#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/

/* FPGA program pin configuration */
#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in data cache)
 */
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
#define CONFIG_SYS_TEMP_STACK_OCM	  1

/* On Chip Memory location */
#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM	*/

#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Definitions for GPIO setup (PPC405EP specific)
 *
 * GPIO0[0]	- External Bus Controller BLAST output
 * GPIO0[1-9]	- Instruction trace outputs -> GPIO
 * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
 * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO
 * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
 * GPIO0[24-27] - UART0 control signal inputs/outputs
 * GPIO0[28-29] - UART1 data signal input/output
 * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
 */
#define CONFIG_SYS_GPIO0_OSRL		0x40000550
#define CONFIG_SYS_GPIO0_OSRH		0x00000110
#define CONFIG_SYS_GPIO0_ISR1L		0x00000000
#define CONFIG_SYS_GPIO0_ISR1H		0x15555445
#define CONFIG_SYS_GPIO0_TSRL		0x00000000
#define CONFIG_SYS_GPIO0_TSRH		0x00000000
#define CONFIG_SYS_GPIO0_TCR		0xF7FE0014

#define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)

/*
 * Default speed selection (cpu_plb_opb_ebc) in mhz.
 * This value will be set if iic boot eprom is disabled.
 */
#if 0
#define PLLMR0_DEFAULT	 PLLMR0_266_133_66_33
#define PLLMR1_DEFAULT	 PLLMR1_266_133_66_33
#endif
#if 1
#define PLLMR0_DEFAULT	 PLLMR0_200_100_50_33
#define PLLMR1_DEFAULT	 PLLMR1_200_100_50_33
#endif
#if 0
#define PLLMR0_DEFAULT	 PLLMR0_133_66_66_33
#define PLLMR1_DEFAULT	 PLLMR1_133_66_66_33
#endif

#endif	/* __CONFIG_H */
Commit	Line	Data
a20b27a3 SR	1	/*
	2	* (C) Copyright 2004
	3	* Stefan Roese, esd gmbh germany, [email protected]
	4	*
3765b3e7	5	* SPDX-License-Identifier: GPL-2.0+
a20b27a3 SR	6	*/
	7
	8	/*
	9	* board/config.h - configuration options, board specific
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	/*
	16	* High Level Configuration Options
	17	* (easy to change)
	18	*/
82f4c6ac	19	#define CONFIG_IDENT_STRING " $Name: $"
a20b27a3 SR	20
a20b27a3 SR	21	#define CONFIG_405EP 1 /* This is a PPC405 CPU */
a20b27a3 SR	22	#define CONFIG_WUH405 1 /* ...on a WUH405 board */
a20b27a3 SR	23
2ae18241 WD	24	#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
2ae18241 WD	25
a20b27a3 SR	26	#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
	27	#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
	28
	29	#define CONFIG_SYS_CLK_FREQ 33333300 /* external frequency to pll */
	30
	31	#define CONFIG_BAUDRATE 9600
	32	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	33
	34	#undef CONFIG_BOOTARGS
	35	#undef CONFIG_BOOTCOMMAND
	36
	37	#define CONFIG_PREBOOT /* enable preboot variable */
	38
	39	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	40	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
a20b27a3	41
96e21f86	42	#define CONFIG_PPC4xx_EMAC
a20b27a3 SR	43	#define CONFIG_MII 1 /* MII PHY management */
	44	#define CONFIG_PHY_ADDR 0 /* PHY address */
	45	#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
	46
	47	#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
	48
a5562901	49
a1aa0bb5 JL	50	/*
	51	* BOOTP options
	52	*/
	53	#define CONFIG_BOOTP_BOOTFILESIZE
	54	#define CONFIG_BOOTP_BOOTPATH
	55	#define CONFIG_BOOTP_GATEWAY
	56	#define CONFIG_BOOTP_HOSTNAME
	57
	58
a5562901 JL	59	/*
	60	* Command line configuration.
	61	*/
	62	#include <config_cmd_default.h>
	63
	64	#define CONFIG_CMD_DHCP
	65	#define CONFIG_CMD_IRQ
	66	#define CONFIG_CMD_ELF
	67	#define CONFIG_CMD_NAND
	68	#define CONFIG_CMD_DATE
	69	#define CONFIG_CMD_I2C
	70	#define CONFIG_CMD_MII
	71	#define CONFIG_CMD_PING
	72	#define CONFIG_CMD_EEPROM
	73
a20b27a3 SR	74
	75	#undef CONFIG_WATCHDOG /* watchdog disabled */
	76
	77	#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
6d0f6bcf	78	#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */
a20b27a3 SR	79
	80	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
	81
	82	/*
	83	* Miscellaneous configurable options
	84	*/
6d0f6bcf	85	#define CONFIG_SYS_LONGHELP /* undef to save memory */
a20b27a3	86
6d0f6bcf	87	#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
a20b27a3	88
a5562901	89	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	90	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
a20b27a3	91	#else
6d0f6bcf	92	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
a20b27a3	93	#endif
6d0f6bcf JCPV	94	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	95	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	96	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
a20b27a3	97
6d0f6bcf	98	#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
a20b27a3	99
6d0f6bcf	100	#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
a20b27a3	101
6d0f6bcf JCPV	102	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	103	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
a20b27a3	104
550650dd SR	105	#define CONFIG_CONS_INDEX 2 /* Use UART1 */
	106	#define CONFIG_SYS_NS16550
	107	#define CONFIG_SYS_NS16550_SERIAL
	108	#define CONFIG_SYS_NS16550_REG_SIZE 1
	109	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
	110
6d0f6bcf	111	#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
6d0f6bcf	112	#define CONFIG_SYS_BASE_BAUD 691200
a20b27a3 SR	113
a20b27a3 SR	114	/* The following table includes the supported baudrates */
6d0f6bcf	115	#define CONFIG_SYS_BAUDRATE_TABLE \
a20b27a3 SR	116	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
	117	57600, 115200, 230400, 460800, 921600 }
	118
6d0f6bcf JCPV	119	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	120	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
a20b27a3	121
a20b27a3 SR	122	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	123
	124	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
	125
6d0f6bcf	126	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
a20b27a3 SR	127
	128	/*-----------------------------------------------------------------------
	129	* NAND-FLASH stuff
	130	*-----------------------------------------------------------------------
	131	*/
6d0f6bcf	132	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
6d0f6bcf	133	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
bd84ee4c MF	134	#define NAND_BIG_DELAY_US 25
bd84ee4c MF	135
6d0f6bcf JCPV	136	#define CONFIG_SYS_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
	137	#define CONFIG_SYS_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
	138	#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
	139	#define CONFIG_SYS_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
bd84ee4c	140
6d0f6bcf	141	#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
a20b27a3 SR	142
	143	/*-----------------------------------------------------------------------
	144	* PCI stuff
	145	*-----------------------------------------------------------------------
	146	*/
	147	#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
	148	#define PCI_HOST_FORCE 1 /* configure as pci host */
	149	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	150
	151	#define CONFIG_PCI /* include pci support */
842033e6	152	#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
a20b27a3 SR	153	#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
	154	#undef CONFIG_PCI_PNP /* do pci plug-and-play */
	155	/* resource configuration */
	156
	157	#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
	158
6d0f6bcf JCPV	159	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
	160	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
	161	#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
	162	#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
	163	#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
	164	#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	165	#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
	166	#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
	167	#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
a20b27a3 SR	168
	169	/*-----------------------------------------------------------------------
	170	* Start addresses for the final memory configuration
	171	* (Set up by the startup code)
6d0f6bcf	172	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
a20b27a3	173	*/
6d0f6bcf JCPV	174	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	175	#define CONFIG_SYS_FLASH_BASE 0xFFFC0000
	176	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	177	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
	178	#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
a20b27a3 SR	179
	180	/*
	181	* For booting Linux, the board info and command line data
	182	* have to be in the first 8 MB of memory, since this is
	183	* the maximum mapped by the Linux kernel during initialization.
	184	*/
6d0f6bcf	185	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
a20b27a3 SR	186	/*-----------------------------------------------------------------------
	187	* FLASH organization
	188	*/
6d0f6bcf JCPV	189	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	190	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
a20b27a3	191
6d0f6bcf JCPV	192	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	193	#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
a20b27a3	194
6d0f6bcf JCPV	195	#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
	196	#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
	197	#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
a20b27a3 SR	198	/*
	199	* The following defines are added for buggy IOP480 byte interface.
	200	* All other boards should use the standard values (CPCI405 etc.)
	201	*/
6d0f6bcf JCPV	202	#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
	203	#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
	204	#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
a20b27a3	205
6d0f6bcf	206	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
a20b27a3 SR	207
a20b27a3 SR	208	#if 0 /* test-only */
6d0f6bcf JCPV	209	#define CONFIG_SYS_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
6d0f6bcf JCPV	210	#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
a20b27a3 SR	211	#endif
	212
	213	/*-----------------------------------------------------------------------
	214	* Environment Variable setup
	215	*/
bb1f8b4f	216	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
0e8d1586 JCPV	217	#define CONFIG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */
0e8d1586 JCPV	218	#define CONFIG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/
a20b27a3 SR	219	/* total size of a CAT24WC16 is 2048 bytes */
a20b27a3 SR	220
6d0f6bcf JCPV	221	#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */
6d0f6bcf JCPV	222	#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */
a20b27a3 SR	223
	224	/*-----------------------------------------------------------------------
	225	* I2C EEPROM (CAT24WC16) for environment
	226	*/
880540de DE	227	#define CONFIG_SYS_I2C
	228	#define CONFIG_SYS_I2C_PPC4XX
	229	#define CONFIG_SYS_I2C_PPC4XX_CH0
	230	#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
	231	#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
a20b27a3	232
6d0f6bcf JCPV	233	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
6d0f6bcf JCPV	234	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
a20b27a3	235	/* mask of address bits that overflow into the "EEPROM chip address" */
6d0f6bcf JCPV	236	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
6d0f6bcf JCPV	237	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
a20b27a3 SR	238	/* 16 byte page write mode using*/
a20b27a3 SR	239	/* last 4 bits of the address */
6d0f6bcf	240	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
a20b27a3	241
a20b27a3 SR	242	/*
	243	* Init Memory Controller:
	244	*
	245	* BR0/1 and OR0/1 (FLASH)
	246	*/
	247
	248	#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
	249
	250	/*-----------------------------------------------------------------------
	251	* External Bus Controller (EBC) Setup
	252	*/
	253
	254	/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
6d0f6bcf JCPV	255	#define CONFIG_SYS_EBC_PB0AP 0x92015480
	256	/#define CONFIG_SYS_EBC_PB0AP 0x08055880 /XXX TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
	257	#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
a20b27a3 SR	258
a20b27a3 SR	259	/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */
6d0f6bcf JCPV	260	#define CONFIG_SYS_EBC_PB1AP 0x92015480
6d0f6bcf JCPV	261	#define CONFIG_SYS_EBC_PB1CR 0xF4018000 /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit */
a20b27a3 SR	262
a20b27a3 SR	263	/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization */
6d0f6bcf JCPV	264	#define CONFIG_SYS_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	265	#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
a20b27a3 SR	266
a20b27a3 SR	267	/* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization */
6d0f6bcf JCPV	268	#define CONFIG_SYS_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
6d0f6bcf JCPV	269	#define CONFIG_SYS_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
a20b27a3 SR	270
	271	#define CAN_BA 0xF0000000 /* CAN Base Address */
	272	#define DUART0_BA 0xF0000400 /* DUART Base Address */
	273	#define DUART1_BA 0xF0000408 /* DUART Base Address */
	274	#define DUART2_BA 0xF0000410 /* DUART Base Address */
	275	#define DUART3_BA 0xF0000418 /* DUART Base Address */
	276	#define RTC_BA 0xF0000500 /* RTC Base Address */
6d0f6bcf	277	#define CONFIG_SYS_NAND_BASE 0xF4000000
a20b27a3 SR	278
	279	/*-----------------------------------------------------------------------
	280	* FPGA stuff
	281	*/
6d0f6bcf JCPV	282	#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
6d0f6bcf JCPV	283	#define CONFIG_SYS_FPGA_MAX_SIZE 1281024 / 128kByte is enough for XC2S50E*/
a20b27a3 SR	284
a20b27a3 SR	285	/* FPGA program pin configuration */
6d0f6bcf JCPV	286	#define CONFIG_SYS_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
	287	#define CONFIG_SYS_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
	288	#define CONFIG_SYS_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
	289	#define CONFIG_SYS_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */
	290	#define CONFIG_SYS_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */
a20b27a3 SR	291
	292	/*-----------------------------------------------------------------------
	293	* Definitions for initial stack pointer and data area (in data cache)
	294	*/
	295	/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
6d0f6bcf	296	#define CONFIG_SYS_TEMP_STACK_OCM 1
a20b27a3 SR	297
a20b27a3 SR	298	/* On Chip Memory location */
6d0f6bcf JCPV	299	#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
	300	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
	301	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
553f0982	302	#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
a20b27a3	303
25ddd1fb	304	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
6d0f6bcf	305	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
a20b27a3 SR	306
	307	/*-----------------------------------------------------------------------
	308	* Definitions for GPIO setup (PPC405EP specific)
	309	*
	310	* GPIO0[0] - External Bus Controller BLAST output
	311	* GPIO0[1-9] - Instruction trace outputs -> GPIO
	312	* GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
	313	* GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO
	314	* GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
	315	* GPIO0[24-27] - UART0 control signal inputs/outputs
	316	* GPIO0[28-29] - UART1 data signal input/output
	317	* GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
	318	*/
afabb498 SR	319	#define CONFIG_SYS_GPIO0_OSRL 0x40000550
	320	#define CONFIG_SYS_GPIO0_OSRH 0x00000110
	321	#define CONFIG_SYS_GPIO0_ISR1L 0x00000000
	322	#define CONFIG_SYS_GPIO0_ISR1H 0x15555445
6d0f6bcf	323	#define CONFIG_SYS_GPIO0_TSRL 0x00000000
afabb498	324	#define CONFIG_SYS_GPIO0_TSRH 0x00000000
6d0f6bcf JCPV	325	#define CONFIG_SYS_GPIO0_TCR 0xF7FE0014
	326
	327	#define CONFIG_SYS_DUART_RST (0x80000000 >> 14)
a20b27a3	328
a20b27a3 SR	329	/*
	330	* Default speed selection (cpu_plb_opb_ebc) in mhz.
	331	* This value will be set if iic boot eprom is disabled.
	332	*/
	333	#if 0
	334	#define PLLMR0_DEFAULT PLLMR0_266_133_66_33
	335	#define PLLMR1_DEFAULT PLLMR1_266_133_66_33
	336	#endif
	337	#if 1
	338	#define PLLMR0_DEFAULT PLLMR0_200_100_50_33
	339	#define PLLMR1_DEFAULT PLLMR1_200_100_50_33
	340	#endif
	341	#if 0
	342	#define PLLMR0_DEFAULT PLLMR0_133_66_66_33
	343	#define PLLMR1_DEFAULT PLLMR1_133_66_66_33
	344	#endif
	345
	346	#endif /* __CONFIG_H */