[J-u-boot.git] / include / configs / pxm2.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * siemens pxm2
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, [email protected].
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 */

#ifndef __CONFIG_PXM2_H
#define __CONFIG_PXM2_H

#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_PXM2

#include "siemens-am33x-common.h"

#define DDR_IOCTRL_VAL		0x18b
#define DDR_PLL_FREQ		266

#define BOARD_DFU_BUTTON_GPIO	59
#define BOARD_LCD_POWER		111
#define BOARD_BACK_LIGHT	112
#define BOARD_TOUCH_POWER	57

#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=59\0" \
	"led0=117,0,1\0" \

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		400000
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50

#define CONFIG_FACTORYSET

#ifndef CONFIG_SPL_BUILD

/* Use common default */

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=pxm2\0" \
	"ubi_off=2048\0"\
	"nand_img_size=0x500000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"splashpos=m,m\0"	\
	CONFIG_ENV_SETTINGS_V1 \
	CONFIG_ENV_SETTINGS_NAND_V1 \
	"mmc_dev=0\0" \
	"mmc_root=/dev/mmcblk0p2 rw\0" \
	"mmc_root_fs_type=ext4 rootwait\0" \
	"mmc_load_uimage=" \
		"mmc rescan; " \
		"setenv bootfile uImage;" \
		"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"mmc_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv bootargs ${bootargs} " \
		"root=${mmc_root} ${mtdparts}" \
		"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
		"eth=${ethaddr} " \
		"\0" \
	"mmc_boot=run mmc_args; " \
		"run mmc_load_uimage; " \
		"bootm ${kloadaddr}\0" \
	""

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */

#define CONFIG_BOOTCOMMAND \
	"if dfubutton; then " \
		"run dfu_start; " \
		"reset; " \
	"fi; " \
	"if mmc rescan; then " \
		"echo SD/MMC found on device ${mmc_dev};" \
		"if run loadbootenv; then " \
			"echo Loaded environment from ${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if test -n $uenvcmd; then " \
			"echo Running uenvcmd ...;" \
			"run uenvcmd;" \
		"fi;" \
		"if run mmc_load_uimage; then " \
			"run mmc_args;" \
			"bootm ${kloadaddr};" \
		"fi;" \
	"fi;" \
	"run nand_boot;" \
	"reset;"

#else

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */

#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
#define PWM_TICKS	0x1388
#define PWM_DUTY	0x200
#endif

#endif	/* ! __CONFIG_PXM2_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
c0dcece7 HS	2	/*
	3	* siemens pxm2
	4	* (C) Copyright 2013 Siemens Schweiz AG
	5	* (C) Heiko Schocher, DENX Software Engineering, [email protected].
	6	*
	7	* Based on:
	8	* U-Boot file:/include/configs/am335x_evm.h
	9	*
	10	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
c0dcece7 HS	11	*/
	12
	13	#ifndef __CONFIG_PXM2_H
	14	#define __CONFIG_PXM2_H
	15
c0dcece7 HS	16	#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
	17
	18	#include "siemens-am33x-common.h"
	19
9fc2ed40	20	#define DDR_IOCTRL_VAL 0x18b
c0dcece7 HS	21	#define DDR_PLL_FREQ 266
	22
	23	#define BOARD_DFU_BUTTON_GPIO 59
c0dcece7 HS	24	#define BOARD_LCD_POWER 111
	25	#define BOARD_BACK_LIGHT 112
	26	#define BOARD_TOUCH_POWER 57
	27
61159b76 HS	28	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	29	"button_dfu0=59\0" \
	30	"led0=117,0,1\0" \
	31
c0dcece7 HS	32	/* Physical Memory Map */
	33	#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
	34
	35	/* I2C Configuration */
	36	#define CONFIG_SYS_I2C_SPEED 400000
	37	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	38
c0dcece7 HS	39	#define CONFIG_FACTORYSET
c0dcece7 HS	40
c0dcece7 HS	41	#ifndef CONFIG_SPL_BUILD
c0dcece7 HS	42
61159b76	43	/* Use common default */
61159b76	44
c0dcece7 HS	45	/* Default env settings */
	46	#define CONFIG_EXTRA_ENV_SETTINGS \
	47	"hostname=pxm2\0" \
6b3943f1	48	"ubi_off=2048\0"\
c0dcece7 HS	49	"nand_img_size=0x500000\0" \
c0dcece7 HS	50	"optargs=\0" \
61159b76 HS	51	"preboot=draco_led 0\0" \
61159b76 HS	52	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
56eb3da4	53	"splashpos=m,m\0" \
61159b76 HS	54	CONFIG_ENV_SETTINGS_V1 \
61159b76 HS	55	CONFIG_ENV_SETTINGS_NAND_V1 \
c0dcece7 HS	56	"mmc_dev=0\0" \
	57	"mmc_root=/dev/mmcblk0p2 rw\0" \
	58	"mmc_root_fs_type=ext4 rootwait\0" \
	59	"mmc_load_uimage=" \
	60	"mmc rescan; " \
	61	"setenv bootfile uImage;" \
	62	"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	63	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	64	"importbootenv=echo Importing environment from mmc ...; " \
	65	"env import -t $loadaddr $filesize\0" \
	66	"mmc_args=run bootargs_defaults;" \
	67	"mtdparts default;" \
	68	"setenv bootargs ${bootargs} " \
	69	"root=${mmc_root} ${mtdparts}" \
	70	"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
	71	"eth=${ethaddr} " \
	72	"\0" \
	73	"mmc_boot=run mmc_args; " \
	74	"run mmc_load_uimage; " \
	75	"bootm ${kloadaddr}\0" \
	76	""
	77
	78	#ifndef CONFIG_RESTORE_FLASH
	79	/* set to negative value for no autoboot */
c0dcece7 HS	80
	81	#define CONFIG_BOOTCOMMAND \
	82	"if dfubutton; then " \
	83	"run dfu_start; " \
	84	"reset; " \
	85	"fi; " \
	86	"if mmc rescan; then " \
	87	"echo SD/MMC found on device ${mmc_dev};" \
	88	"if run loadbootenv; then " \
	89	"echo Loaded environment from ${bootenv};" \
	90	"run importbootenv;" \
	91	"fi;" \
	92	"if test -n $uenvcmd; then " \
	93	"echo Running uenvcmd ...;" \
	94	"run uenvcmd;" \
	95	"fi;" \
	96	"if run mmc_load_uimage; then " \
	97	"run mmc_args;" \
	98	"bootm ${kloadaddr};" \
	99	"fi;" \
	100	"fi;" \
	101	"run nand_boot;" \
56eb3da4	102	"reset;"
c0dcece7 HS	103
c0dcece7 HS	104	#else
c0dcece7 HS	105
	106	#define CONFIG_BOOTCOMMAND \
	107	"setenv autoload no; " \
	108	"dhcp; " \
	109	"if tftp 80000000 debrick.scr; then " \
	110	"source 80000000; " \
	111	"fi"
	112	#endif
	113	#endif /* CONFIG_SPL_BUILD */
	114
c0dcece7 HS	115	#if defined(CONFIG_VIDEO)
c0dcece7 HS	116	#define CONFIG_VIDEO_DA8XX
c0dcece7 HS	117	#define CONFIG_SPLASH_SCREEN
	118	#define CONFIG_SPLASH_SCREEN_ALIGN
	119	#define CONFIG_VIDEO_LOGO
	120	#define CONFIG_VIDEO_BMP_RLE8
	121	#define CONFIG_VIDEO_BMP_LOGO
c0dcece7 HS	122	#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
	123	#define PWM_TICKS 0x1388
	124	#define PWM_DUTY 0x200
	125	#endif
	126
	127	#endif /* ! __CONFIG_PXM2_H */