[J-u-boot.git] / arch / arm / dts / r8a7794-silk.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the SILK board
 *
 * Copyright (C) 2014 Renesas Electronics Corporation
 * Copyright (C) 2014-2015 Renesas Solutions Corp.
 * Copyright (C) 2014-2015 Cogent Embedded, Inc.
 */

/*
 * SSI-AK4643
 *
 * SW1: 2-1: AK4643
 *      2-3: ADV7511
 *
 * This command is required before playback/capture:
 *
 *	amixer set "LINEOUT Mixer DACL" on
 */

/dts-v1/;
#include "r8a7794.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "SILK";
	compatible = "renesas,silk", "renesas,r8a7794";

	aliases {
		serial0 = &scif2;
		i2c9 = &gpioi2c1;
		i2c10 = &i2chdmi;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	gpio-keys {
		compatible = "gpio-keys";

		key-3 {
			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_3>;
			label = "SW3";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-4 {
			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_4>;
			label = "SW4";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-6 {
			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_6>;
			label = "SW6";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-a {
			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_A>;
			label = "SW12-1";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-b {
			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_B>;
			label = "SW12-2";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-c {
			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_C>;
			label = "SW12-3";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-d {
			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_D>;
			label = "SW12-4";
			wakeup-source;
			debounce-interval = <20>;
		};
	};

	d3_3v: regulator-d3-3v {
		compatible = "regulator-fixed";
		regulator-name = "D3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};

	vcc_sdhi1: regulator-vcc-sdhi1 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI1 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi1: regulator-vccq-sdhi1 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI1 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vga-encoder {
		compatible = "adi,adv7123";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7123_in: endpoint {
					remote-endpoint = <&du_out_rgb1>;
				};
			};
			port@1 {
				reg = <1>;
				adv7123_out: endpoint {
					remote-endpoint = <&vga_in>;
				};
			};
		};
	};

	hdmi-out {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&adv7511_out>;
			};
		};
	};

	vga {
		compatible = "vga-connector";

		port {
			vga_in: endpoint {
				remote-endpoint = <&adv7123_out>;
			};
		};
	};

	x2_clk: x2-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <148500000>;
	};

	x3_clk: x3-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <74250000>;
	};

	x9_clk: audio_clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <12288000>;
	};

	sound {
		compatible = "simple-audio-card";

		simple-audio-card,format = "left_j";
		simple-audio-card,bitclock-master = <&soundcodec>;
		simple-audio-card,frame-master = <&soundcodec>;

		simple-audio-card,cpu {
			sound-dai = <&rcar_sound>;
		};

		soundcodec: simple-audio-card,codec {
			sound-dai = <&ak4643>;
			clocks = <&x9_clk>;
		};
	};

	gpioi2c1: i2c-9 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	/*
	 * A fallback to GPIO is provided for I2C1.
	 */
	i2chdmi: i2c-10 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c1>, <&gpioi2c1>;
		i2c-bus-name = "i2c-hdmi";
		#address-cells = <1>;
		#size-cells = <0>;

		ak4643: codec@12 {
			compatible = "asahi-kasei,ak4643";
			#sound-dai-cells = <0>;
			reg = <0x12>;
		};

		composite-in@20 {
			compatible = "adi,adv7180";
			reg = <0x20>;
			remote = <&vin0>;

			port {
				adv7180: endpoint {
					bus-width = <8>;
					remote-endpoint = <&vin0ep>;
				};
			};
		};

		hdmi@39 {
			compatible = "adi,adv7511w";
			reg = <0x39>;
			interrupt-parent = <&gpio5>;
			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;

			adi,input-depth = <8>;
			adi,input-colorspace = "rgb";
			adi,input-clock = "1x";
			adi,input-style = <1>;
			adi,input-justification = "evenly";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7511_in: endpoint {
						remote-endpoint = <&du_out_rgb0>;
					};
				};

				port@1 {
					reg = <1>;
					adv7511_out: endpoint {
						remote-endpoint = <&hdmi_con>;
					};
				};
			};
		};

		eeprom@50 {
			compatible = "renesas,r1ex24002", "atmel,24c02";
			reg = <0x50>;
			pagesize = <16>;
		};
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	scif2_pins: scif2 {
		groups = "scif2_data";
		function = "scif2";
	};

	scif_clk_pins: scif_clk {
		groups = "scif_clk";
		function = "scif_clk";
	};

	ether_pins: ether {
		groups = "eth_link", "eth_mdio", "eth_rmii";
		function = "eth";
	};

	phy1_pins: phy1 {
		groups = "intc_irq8";
		function = "intc";
	};

	i2c1_pins: i2c1 {
		groups = "i2c1";
		function = "i2c1";
	};

	mmcif0_pins: mmcif0 {
		groups = "mmc_data8", "mmc_ctrl";
		function = "mmc";
	};

	sdhi1_pins: sd1 {
		groups = "sdhi1_data4", "sdhi1_ctrl";
		function = "sdhi1";
	};

	qspi_pins: qspi {
		groups = "qspi_ctrl", "qspi_data4";
		function = "qspi";
	};

	vin0_pins: vin0 {
		groups = "vin0_data8", "vin0_clk";
		function = "vin0";
	};

	usb0_pins: usb0 {
		groups = "usb0";
		function = "usb0";
	};

	usb1_pins: usb1 {
		groups = "usb1";
		function = "usb1";
	};

	du0_pins: du0 {
		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
		function = "du0";
	};

	du1_pins: du1 {
		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
		function = "du1";
	};

	ssi_pins: sound {
		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
		function = "ssi";
	};

	audio_clk_pins: audio_clk {
		groups = "audio_clkc";
		function = "audio_clk";
	};
};

&scif2 {
	pinctrl-0 = <&scif2_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif_clk {
	clock-frequency = <14745600>;
};

&ether {
	pinctrl-0 = <&ether_pins &phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
		interrupt-parent = <&irqc0>;
		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
		micrel,led-mode = <1>;
	};
};

&i2c1 {
	pinctrl-0 = <&i2c1_pins>;
	pinctrl-names = "i2c-hdmi";

	clock-frequency = <400000>;
};

&mmcif0 {
	pinctrl-0 = <&mmcif0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&d3_3v>;
	vqmmc-supply = <&d3_3v>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&sdhi1 {
	pinctrl-0 = <&sdhi1_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi1>;
	vqmmc-supply = <&vccq_sdhi1>;
	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash@0 {
		compatible = "spansion,s25fl512s", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <30000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		spi-cpol;
		spi-cpha;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "loader";
				reg = <0x00000000 0x00040000>;
				read-only;
			};
			partition@40000 {
				label = "user";
				reg = <0x00040000 0x00400000>;
				read-only;
			};
			partition@440000 {
				label = "flash";
				reg = <0x00440000 0x03bc0000>;
			};
		};
	};
};

/* composite video input */
&vin0 {
	status = "okay";
	pinctrl-0 = <&vin0_pins>;
	pinctrl-names = "default";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		vin0ep: endpoint {
			remote-endpoint = <&adv7180>;
			bus-width = <8>;
		};
	};
};

&pci0 {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
};

&pci1 {
	status = "okay";
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";
};

&usbphy {
	status = "okay";
};

&du {
	pinctrl-0 = <&du0_pins &du1_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
		 <&x2_clk>, <&x3_clk>;
	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";

	ports {
		port@0 {
			endpoint {
				remote-endpoint = <&adv7511_in>;
			};
		};
		port@1 {
			endpoint {
				remote-endpoint = <&adv7123_in>;
			};
		};
	};
};

&rcar_sound {
	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
	pinctrl-names = "default";
	status = "okay";

	/* Single DAI */
	#sound-dai-cells = <0>;

	rcar_sound,dai {
		dai0 {
			playback = <&ssi0>;
			capture  = <&ssi1>;
		};
	};
};

&ssi1 {
	shared-pin;
};
Commit	Line	Data
83d290c5	1	// SPDX-License-Identifier: GPL-2.0
9a26fc5a MV	2	/*
	3	* Device Tree Source for the SILK board
	4	*
	5	* Copyright (C) 2014 Renesas Electronics Corporation
	6	* Copyright (C) 2014-2015 Renesas Solutions Corp.
	7	* Copyright (C) 2014-2015 Cogent Embedded, Inc.
9a26fc5a MV	8	*/
	9
	10	/*
	11	* SSI-AK4643
	12	*
	13	* SW1: 2-1: AK4643
	14	* 2-3: ADV7511
	15	*
	16	* This command is required before playback/capture:
	17	*
	18	* amixer set "LINEOUT Mixer DACL" on
	19	*/
	20
	21	/dts-v1/;
	22	#include "r8a7794.dtsi"
	23	#include <dt-bindings/gpio/gpio.h>
252c8b45	24	#include <dt-bindings/input/input.h>
9a26fc5a MV	25
	26	/ {
	27	model = "SILK";
	28	compatible = "renesas,silk", "renesas,r8a7794";
	29
	30	aliases {
	31	serial0 = &scif2;
252c8b45 MV	32	i2c9 = &gpioi2c1;
252c8b45 MV	33	i2c10 = &i2chdmi;
9a26fc5a MV	34	};
	35
	36	chosen {
	37	bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
	38	stdout-path = "serial0:115200n8";
	39	};
	40
	41	memory@40000000 {
	42	device_type = "memory";
	43	reg = <0 0x40000000 0 0x40000000>;
	44	};
	45
252c8b45 MV	46	gpio-keys {
	47	compatible = "gpio-keys";
	48
	49	key-3 {
	50	gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
	51	linux,code = <KEY_3>;
	52	label = "SW3";
	53	wakeup-source;
	54	debounce-interval = <20>;
	55	};
	56	key-4 {
	57	gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
	58	linux,code = <KEY_4>;
	59	label = "SW4";
	60	wakeup-source;
	61	debounce-interval = <20>;
	62	};
	63	key-6 {
	64	gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
	65	linux,code = <KEY_6>;
	66	label = "SW6";
	67	wakeup-source;
	68	debounce-interval = <20>;
	69	};
	70	key-a {
	71	gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
	72	linux,code = <KEY_A>;
	73	label = "SW12-1";
	74	wakeup-source;
	75	debounce-interval = <20>;
	76	};
	77	key-b {
	78	gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
	79	linux,code = <KEY_B>;
	80	label = "SW12-2";
	81	wakeup-source;
	82	debounce-interval = <20>;
	83	};
	84	key-c {
	85	gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
	86	linux,code = <KEY_C>;
	87	label = "SW12-3";
	88	wakeup-source;
	89	debounce-interval = <20>;
	90	};
	91	key-d {
	92	gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
	93	linux,code = <KEY_D>;
	94	label = "SW12-4";
	95	wakeup-source;
	96	debounce-interval = <20>;
	97	};
	98	};
	99
9a26fc5a MV	100	d3_3v: regulator-d3-3v {
	101	compatible = "regulator-fixed";
	102	regulator-name = "D3.3V";
	103	regulator-min-microvolt = <3300000>;
	104	regulator-max-microvolt = <3300000>;
	105	regulator-boot-on;
	106	regulator-always-on;
	107	};
	108
	109	vcc_sdhi1: regulator-vcc-sdhi1 {
	110	compatible = "regulator-fixed";
	111
	112	regulator-name = "SDHI1 Vcc";
	113	regulator-min-microvolt = <3300000>;
	114	regulator-max-microvolt = <3300000>;
	115
	116	gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
	117	enable-active-high;
	118	};
	119
	120	vccq_sdhi1: regulator-vccq-sdhi1 {
	121	compatible = "regulator-gpio";
	122
	123	regulator-name = "SDHI1 VccQ";
	124	regulator-min-microvolt = <1800000>;
	125	regulator-max-microvolt = <3300000>;
	126
	127	gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
	128	gpios-states = <1>;
	129	states = <3300000 1
	130	1800000 0>;
	131	};
	132
	133	vga-encoder {
	134	compatible = "adi,adv7123";
	135
	136	ports {
	137	#address-cells = <1>;
	138	#size-cells = <0>;
	139
	140	port@0 {
	141	reg = <0>;
	142	adv7123_in: endpoint {
	143	remote-endpoint = <&du_out_rgb1>;
	144	};
	145	};
	146	port@1 {
	147	reg = <1>;
	148	adv7123_out: endpoint {
	149	remote-endpoint = <&vga_in>;
	150	};
	151	};
	152	};
	153	};
	154
	155	hdmi-out {
	156	compatible = "hdmi-connector";
	157	type = "a";
	158
	159	port {
	160	hdmi_con: endpoint {
	161	remote-endpoint = <&adv7511_out>;
	162	};
	163	};
164	};
165
166	vga {
167	compatible = "vga-connector";
168
169	port {
170	vga_in: endpoint {
171	remote-endpoint = <&adv7123_out>;
172	};
173	};
174	};
175
176	x2_clk: x2-clock {
177	compatible = "fixed-clock";
178	#clock-cells = <0>;
179	clock-frequency = <148500000>;
180	};
181
182	x3_clk: x3-clock {
183	compatible = "fixed-clock";
184	#clock-cells = <0>;
185	clock-frequency = <74250000>;
186	};
187
188	x9_clk: audio_clock {
189	compatible = "fixed-clock";
190	#clock-cells = <0>;
191	clock-frequency = <12288000>;
192	};
193
194	sound {
195	compatible = "simple-audio-card";
196
197	simple-audio-card,format = "left_j";
198	simple-audio-card,bitclock-master = <&soundcodec>;
199	simple-audio-card,frame-master = <&soundcodec>;
200
201	simple-audio-card,cpu {
202	sound-dai = <&rcar_sound>;
203	};
204
205	soundcodec: simple-audio-card,codec {
206	sound-dai = <&ak4643>;
207	clocks = <&x9_clk>;
208	};
209	};
252c8b45 MV	210
	211	gpioi2c1: i2c-9 {
	212	#address-cells = <1>;
	213	#size-cells = <0>;
	214	compatible = "i2c-gpio";
	215	status = "disabled";
	216	scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	217	sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	218	i2c-gpio,delay-us = <5>;
	219	};
	220
	221	/*
	222	* A fallback to GPIO is provided for I2C1.
	223	*/
	224	i2chdmi: i2c-10 {
	225	compatible = "i2c-demux-pinctrl";
	226	i2c-parent = <&i2c1>, <&gpioi2c1>;
	227	i2c-bus-name = "i2c-hdmi";
	228	#address-cells = <1>;
	229	#size-cells = <0>;
	230
	231	ak4643: codec@12 {
	232	compatible = "asahi-kasei,ak4643";
	233	#sound-dai-cells = <0>;
	234	reg = <0x12>;
	235	};
	236
	237	composite-in@20 {
	238	compatible = "adi,adv7180";
	239	reg = <0x20>;
	240	remote = <&vin0>;
	241
	242	port {
	243	adv7180: endpoint {
	244	bus-width = <8>;
	245	remote-endpoint = <&vin0ep>;
	246	};
	247	};
	248	};
	249
	250	hdmi@39 {
	251	compatible = "adi,adv7511w";
	252	reg = <0x39>;
	253	interrupt-parent = <&gpio5>;
	254	interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
	255
	256	adi,input-depth = <8>;
	257	adi,input-colorspace = "rgb";
	258	adi,input-clock = "1x";
	259	adi,input-style = <1>;
	260	adi,input-justification = "evenly";
	261
	262	ports {
	263	#address-cells = <1>;
	264	#size-cells = <0>;
	265
	266	port@0 {
	267	reg = <0>;
	268	adv7511_in: endpoint {
	269	remote-endpoint = <&du_out_rgb0>;
	270	};
	271	};
	272
	273	port@1 {
274	reg = <1>;
275	adv7511_out: endpoint {
276	remote-endpoint = <&hdmi_con>;
277	};
278	};
279	};
280	};
281
282	eeprom@50 {
283	compatible = "renesas,r1ex24002", "atmel,24c02";
284	reg = <0x50>;
285	pagesize = <16>;
286	};
287	};
9a26fc5a MV	288	};
	289
	290	&extal_clk {
	291	clock-frequency = <20000000>;
	292	};
	293
	294	&pfc {
	295	pinctrl-0 = <&scif_clk_pins>;
	296	pinctrl-names = "default";
	297
	298	scif2_pins: scif2 {
	299	groups = "scif2_data";
	300	function = "scif2";
	301	};
	302
	303	scif_clk_pins: scif_clk {
	304	groups = "scif_clk";
	305	function = "scif_clk";
	306	};
	307
	308	ether_pins: ether {
	309	groups = "eth_link", "eth_mdio", "eth_rmii";
	310	function = "eth";
	311	};
	312
	313	phy1_pins: phy1 {
	314	groups = "intc_irq8";
	315	function = "intc";
	316	};
	317
	318	i2c1_pins: i2c1 {
	319	groups = "i2c1";
	320	function = "i2c1";
	321	};
	322
	323	mmcif0_pins: mmcif0 {
	324	groups = "mmc_data8", "mmc_ctrl";
	325	function = "mmc";
	326	};
	327
	328	sdhi1_pins: sd1 {
	329	groups = "sdhi1_data4", "sdhi1_ctrl";
	330	function = "sdhi1";
	331	};
	332
	333	qspi_pins: qspi {
	334	groups = "qspi_ctrl", "qspi_data4";
	335	function = "qspi";
	336	};
	337
	338	vin0_pins: vin0 {
	339	groups = "vin0_data8", "vin0_clk";
	340	function = "vin0";
	341	};
	342
	343	usb0_pins: usb0 {
	344	groups = "usb0";
	345	function = "usb0";
	346	};
	347
	348	usb1_pins: usb1 {
	349	groups = "usb1";
	350	function = "usb1";
	351	};
352
353	du0_pins: du0 {
354	groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
355	function = "du0";
356	};
357
358	du1_pins: du1 {
359	groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
360	function = "du1";
361	};
362
363	ssi_pins: sound {
364	groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
365	function = "ssi";
366	};
367
368	audio_clk_pins: audio_clk {
369	groups = "audio_clkc";
370	function = "audio_clk";
371	};
372	};
373
374	&scif2 {
375	pinctrl-0 = <&scif2_pins>;
376	pinctrl-names = "default";
377
378	status = "okay";
379	};
380
381	&scif_clk {
382	clock-frequency = <14745600>;
383	};
384
385	&ether {
386	pinctrl-0 = <&ether_pins &phy1_pins>;
387	pinctrl-names = "default";
388
389	phy-handle = <&phy1>;
390	renesas,ether-link-active-low;
391	status = "okay";
392
393	phy1: ethernet-phy@1 {
394	reg = <1>;
395	interrupt-parent = <&irqc0>;
396	interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
397	micrel,led-mode = <1>;
398	};
399	};
400
401	&i2c1 {
402	pinctrl-0 = <&i2c1_pins>;
252c8b45	403	pinctrl-names = "i2c-hdmi";
9a26fc5a	404
9a26fc5a	405	clock-frequency = <400000>;
9a26fc5a MV	406	};
	407
	408	&mmcif0 {
	409	pinctrl-0 = <&mmcif0_pins>;
	410	pinctrl-names = "default";
	411
	412	vmmc-supply = <&d3_3v>;
	413	vqmmc-supply = <&d3_3v>;
	414	bus-width = <8>;
	415	non-removable;
	416	status = "okay";
	417	};
	418
	419	&sdhi1 {
	420	pinctrl-0 = <&sdhi1_pins>;
	421	pinctrl-names = "default";
	422
	423	vmmc-supply = <&vcc_sdhi1>;
	424	vqmmc-supply = <&vccq_sdhi1>;
	425	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	426	status = "okay";
	427	};
	428
	429	&qspi {
	430	pinctrl-0 = <&qspi_pins>;
	431	pinctrl-names = "default";
	432
	433	status = "okay";
	434
	435	flash@0 {
	436	compatible = "spansion,s25fl512s", "jedec,spi-nor";
	437	reg = <0>;
	438	spi-max-frequency = <30000000>;
	439	spi-tx-bus-width = <4>;
	440	spi-rx-bus-width = <4>;
	441	spi-cpol;
	442	spi-cpha;
	443	m25p,fast-read;
	444
	445	partitions {
	446	compatible = "fixed-partitions";
	447	#address-cells = <1>;
	448	#size-cells = <1>;
	449
	450	partition@0 {
	451	label = "loader";
	452	reg = <0x00000000 0x00040000>;
	453	read-only;
	454	};
	455	partition@40000 {
	456	label = "user";
	457	reg = <0x00040000 0x00400000>;
	458	read-only;
	459	};
	460	partition@440000 {
	461	label = "flash";
	462	reg = <0x00440000 0x03bc0000>;
	463	};
	464	};
	465	};
	466	};
	467
	468	/* composite video input */
	469	&vin0 {
470	status = "okay";
471	pinctrl-0 = <&vin0_pins>;
472	pinctrl-names = "default";
473
474	port {
475	#address-cells = <1>;
476	#size-cells = <0>;
477
478	vin0ep: endpoint {
479	remote-endpoint = <&adv7180>;
480	bus-width = <8>;
481	};
482	};
483	};
484
485	&pci0 {
486	status = "okay";
487	pinctrl-0 = <&usb0_pins>;
488	pinctrl-names = "default";
489	};
490
491	&pci1 {
492	status = "okay";
493	pinctrl-0 = <&usb1_pins>;
494	pinctrl-names = "default";
495	};
496
497	&usbphy {
498	status = "okay";
499	};
500
501	&du {
502	pinctrl-0 = <&du0_pins &du1_pins>;
503	pinctrl-names = "default";
504	status = "okay";
505
506	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
507	<&x2_clk>, <&x3_clk>;
508	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
509
510	ports {
511	port@0 {
512	endpoint {
513	remote-endpoint = <&adv7511_in>;
514	};
515	};
516	port@1 {
517	endpoint {
518	remote-endpoint = <&adv7123_in>;
519	};
520	};
521	};
522	};
523
524	&rcar_sound {
525	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
526	pinctrl-names = "default";
527	status = "okay";
528
529	/* Single DAI */
530	#sound-dai-cells = <0>;
531
532	rcar_sound,dai {
533	dai0 {
534	playback = <&ssi0>;
535	capture = <&ssi1>;
536	};
537	};
538	};
539
540	&ssi1 {
541	shared-pin;
542	};