[J-u-boot.git] / include / configs / ep82xxm.h

/*
 * Copyright (C) 2006 Embedded Planet, LLC.
 *
 * U-Boot configuration for Embedded Planet EP82xxM boards.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MPC8260
#define CPU_ID_STR		"MPC8270"

#define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board */
			/* 256MB SDRAM / 64MB FLASH */

#undef DEBUG

#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */

/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
#define CONFIG_ENV_OVERWRITE

/*
 * Select serial console configuration
 *
 * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
 * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
 * for SCC).
 */
#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
#undef	CONFIG_CONS_NONE		/* It's not on external UART */
#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */

#define CFG_BCSR		0xFA000000

/*
 * Select ethernet configuration
 *
 * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
 * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
 * SCC, 1-3 for FCC)
 *
 * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
 * must be defined elsewhere (as for the console), or CFG_CMD_NET must
 * be removed from CONFIG_COMMANDS to remove support for networking.
 */
#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */

#define CONFIG_NET_MULTI

#define CONFIG_ETHER_ON_FCC2
#define CONFIG_ETHER_ON_FCC3

#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
#define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)
#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
#define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)

#define CFG_CPMFCR_RAMTYPE	0
#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)

#define CONFIG_MII			/* MII PHY management        */
#define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */

/*
 * GPIO pins used for bit-banged MII communications
 */
#define MDIO_PORT		0	/* Not used - implemented in BCSR */
#define MDIO_ACTIVE		(*(vu_char *)(CFG_BCSR + 8) &= 0xFB)
#define MDIO_TRISTATE		(*(vu_char *)(CFG_BCSR + 8) |= 0x04)
#define MDIO_READ		(*(vu_char *)(CFG_BCSR + 8) & 1)

#define MDIO(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \
				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFE

#define MDC(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \
				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFD

#define MIIDELAY		udelay(1)


#ifndef CONFIG_8260_CLKIN
#define CONFIG_8260_CLKIN	66000000 /* in Hz */
#endif

#define CONFIG_BAUDRATE		115200

#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>


#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_PCI
#define CONFIG_CMD_DIAG


#define CONFIG_ETHADDR		00:10:EC:00:88:65
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR		00:10:EC:80:88:65
#define CONFIG_IPADDR		10.0.0.245
#define CONFIG_HOSTNAME		EP82xxM
#define CONFIG_SERVERIP		10.0.0.26
#define CONFIG_GATEWAYIP	10.0.0.1
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
#define CFG_ENV_IN_OWN_SECT	1
#define CONFIG_AUTO_COMPLETE	1
#define	CONFIG_EXTRA_ENV_SETTINGS	"ethprime=FCC3 ETHERNET"

#if defined(CONFIG_CMD_KGDB)
#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
#define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */
#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
#endif

#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */

/*
 * Miscellaneous configurable options
 */
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2	"> "
#define CFG_LONGHELP			/* undef to save memory	    */
#define CFG_PROMPT		"ep82xxm=> "	/* Monitor Command Prompt   */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
#else
#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
#define CFG_MAXARGS		16		/* max number of command args */
#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */

#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

#define CFG_LOAD_ADDR		0x100000	/* default load address */

#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/*-----------------------------------------------------------------------
 * Environment
 *----------------------------------------------------------------------*/
/*
 * Define here the location of the environment variables (FLASH or EEPROM).
 * Note: DENX encourages to use redundant environment in FLASH.
 */
#if 1
#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
#else
#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
#endif

/*-----------------------------------------------------------------------
 * FLASH related
 *----------------------------------------------------------------------*/
#define CFG_FLASH_BASE		0xFC000000
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_DRIVER
#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector in flinfo */

#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE	0x20000
#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#endif /* CFG_ENV_IS_IN_FLASH */

/*-----------------------------------------------------------------------
 * I2C
 *----------------------------------------------------------------------*/
/* EEPROM Configuration */
#define CFG_EEPROM_SIZE	0x1000
#define CFG_I2C_EEPROM_ADDR	0x54
#define CFG_I2C_EEPROM_ADDR_LEN	1
#define CFG_EEPROM_PAGE_WRITE_BITS	3
#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10

#ifdef CFG_ENV_IS_IN_EEPROM
#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
#define CFG_ENV_OFFSET		0x0
#endif /* CFG_ENV_IS_IN_EEPROM */

/* RTC Configuration */
#define CONFIG_RTC_M41T11	1 	/* uses a M41T81 */
#define CFG_I2C_RTC_ADDR	0x68
#define CONFIG_M41T11_BASE_YEAR	1900

/* I2C SYSMON (LM75) */
#define CONFIG_DTT_LM75		1
#define CONFIG_DTT_SENSORS	{0}
#define CFG_DTT_MAX_TEMP	70
#define CFG_DTT_LOW_TEMP	-30
#define	CFG_DTT_HYSTERESIS	3

/*-----------------------------------------------------------------------
 * NVRAM Configuration
 *-----------------------------------------------------------------------
 */
#define CFG_NVRAM_BASE_ADDR	0xFA080000
#define CFG_NVRAM_SIZE		(128*1024)-16


/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
/* General PCI */
#define CONFIG_PCI			/* include pci support	        */
#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
#define CONFIG_PCI_BOOTDELAY	0

/* PCI Memory map (if different from default map */
#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE		/* Local base */
#define CFG_PCI_SLV_MEM_BUS		0x00000000	/* PCI base */
#define CFG_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
				 PICMR_PREFETCH_EN)

/*
 * These are the windows that allow the CPU to access PCI address space.
 * All three PCI master windows, which allow the CPU to access PCI
 * prefetch, non prefetch, and IO space (see below), must all fit within
 * these windows.
 */

/*
 * Master window that allows the CPU to access PCI Memory (prefetch).
 * This window will be setup with the second set of Outbound ATU registers
 * in the bridge.
 */

#define CFG_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
#define CFG_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
#define	CFG_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
#define CFG_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
#define CFG_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)

/*
 * Master window that allows the CPU to access PCI Memory (non-prefetch).
 * This window will be setup with the second set of Outbound ATU registers
 * in the bridge.
 */

#define CFG_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
#define CFG_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
#define CFG_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
#define CFG_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
#define CFG_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)

/*
 * Master window that allows the CPU to access PCI IO space.
 * This window will be setup with the first set of Outbound ATU registers
 * in the bridge.
 */

#define CFG_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
#define CFG_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
#define CFG_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
#define CFG_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
#define CFG_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)


/* PCIBR0 - for PCI IO*/
#define CFG_PCI_MSTR0_LOCAL		CFG_PCI_MSTR_IO_LOCAL		/* Local base */
#define CFG_PCIMSK0_MASK		~(CFG_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
/* PCIBR1 - prefetch and non-prefetch regions joined together */
#define CFG_PCI_MSTR1_LOCAL		CFG_PCI_MSTR_MEM_LOCAL
#define CFG_PCIMSK1_MASK		~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)


#define	CFG_DIRECT_FLASH_TFTP

#if defined(CONFIG_CMD_JFFS2)
#define CFG_JFFS2_FIRST_BANK	0
#define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
#define CFG_JFFS2_FIRST_SECTOR  0
#define CFG_JFFS2_LAST_SECTOR   62
#define CFG_JFFS2_SORT_FRAGMENTS
#define CFG_JFFS_CUSTOM_PART
#endif /* CFG_CMD_JFFS2 */

#if defined(CONFIG_CMD_I2C)
#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
#define CFG_I2C_SPEED		100000	/* I2C speed			*/
#define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
#endif /* CFG_CMD_I2C */

#define CFG_MONITOR_BASE	TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#endif

#define CFG_MONITOR_LEN		(512 << 10)	/* Reserve 256KB for Monitor */

#define CFG_DEFAULT_IMMR	0x00010000
#define CFG_IMMR		0xF0000000

#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET


/* Hard reset configuration word */
#define CFG_HRCW_MASTER		0 /*0x1C800641*/  /* Not used - provided by CPLD */
/* No slaves */
#define CFG_HRCW_SLAVE1 	0
#define CFG_HRCW_SLAVE2 	0
#define CFG_HRCW_SLAVE3 	0
#define CFG_HRCW_SLAVE4 	0
#define CFG_HRCW_SLAVE5 	0
#define CFG_HRCW_SLAVE6 	0
#define CFG_HRCW_SLAVE7 	0

#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM		0x02	/* Software reboot                  */

#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif

#define CFG_HID0_INIT		0
#define CFG_HID0_FINAL		0

#define CFG_HID2		0

#define CFG_SIUMCR		0x02610000
#define CFG_SYPCR		0xFFFF0689
#define CFG_BCR			0x8080E000
#define CFG_SCCR		0x00000001

#define CFG_RMR			0
#define CFG_TMCNTSC		0x000000C3
#define CFG_PISCR		0x00000083
#define CFG_RCCR		0

#define CFG_MPTPR		0x0A00
#define CFG_PSDMR		0xC432246E
#define CFG_PSRT		0x32

#define CFG_SDRAM_BASE		0x00000000
#define CFG_SDRAM_BR		(CFG_SDRAM_BASE | 0x00000041)
#define CFG_SDRAM_OR		0xF0002900

#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00001801)
#define CFG_OR0_PRELIM		0xFC000882
#define CFG_BR4_PRELIM		(CFG_BCSR | 0x00001001)
#define CFG_OR4_PRELIM		0xFFF00050

#define CFG_RESET_ADDRESS	0xFFF00100

#endif /* __CONFIG_H */
Commit	Line	Data
7ce343e4 WD	1	/*
	2	* Copyright (C) 2006 Embedded Planet, LLC.
	3	*
	4	* U-Boot configuration for Embedded Planet EP82xxM boards.
	5	*
	6	* See file CREDITS for list of people who contributed to this
	7	* project.
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of
	12	* the License, or (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	22	* MA 02111-1307 USA
	23	*/
	24
	25	#ifndef __CONFIG_H
	26	#define __CONFIG_H
	27
	28	#define CONFIG_MPC8260
	29	#define CPU_ID_STR "MPC8270"
	30
f836e414	31	#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */
7ce343e4 WD	32	/* 256MB SDRAM / 64MB FLASH */
	33
	34	#undef DEBUG
	35
	36	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
	37
	38	/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
	39	#define CONFIG_ENV_OVERWRITE
	40
	41	/*
	42	* Select serial console configuration
	43	*
	44	* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	45	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	46	* for SCC).
	47	*/
	48	#define CONFIG_CONS_ON_SMC /* Console is on SMC */
	49	#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
	50	#undef CONFIG_CONS_NONE /* It's not on external UART */
	51	#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
	52
	53	#define CFG_BCSR 0xFA000000
	54
	55	/*
	56	* Select ethernet configuration
	57	*
	58	* If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
	59	* then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
	60	* SCC, 1-3 for FCC)
	61	*
	62	* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
	63	* must be defined elsewhere (as for the console), or CFG_CMD_NET must
	64	* be removed from CONFIG_COMMANDS to remove support for networking.
	65	*/
	66	#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
	67	#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
	68	#undef CONFIG_ETHER_NONE /* No external Ethernet */
	69
	70	#define CONFIG_NET_MULTI
	71
	72	#define CONFIG_ETHER_ON_FCC2
	73	#define CONFIG_ETHER_ON_FCC3
	74
	75	#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 \| CMXFCR_RF3CS_MSK \| CMXFCR_TF3CS_MSK)
	76	#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 \| CMXFCR_TF3CS_CLK16)
	77	#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)
	78	#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)
	79
	80	#define CFG_CPMFCR_RAMTYPE 0
	81	#define CFG_FCC_PSMR (FCC_PSMR_FDE \| FCC_PSMR_LPB)
	82
	83	#define CONFIG_MII /* MII PHY management */
	84	#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
	85
	86	/*
	87	* GPIO pins used for bit-banged MII communications
	88	*/
	89	#define MDIO_PORT 0 /* Not used - implemented in BCSR */
	90	#define MDIO_ACTIVE ((vu_char )(CFG_BCSR + 8) &= 0xFB)
	91	#define MDIO_TRISTATE ((vu_char )(CFG_BCSR + 8) \|= 0x04)
	92	#define MDIO_READ ((vu_char )(CFG_BCSR + 8) & 1)
	93
	94	#define MDIO(bit) if(bit) (vu_char )(CFG_BCSR + 8) \|= 0x01; \
	95	else (vu_char )(CFG_BCSR + 8) &= 0xFE
96
97	#define MDC(bit) if(bit) (vu_char )(CFG_BCSR + 8) \|= 0x02; \
98	else (vu_char )(CFG_BCSR + 8) &= 0xFD
99
100	#define MIIDELAY udelay(1)
101
102
103	#ifndef CONFIG_8260_CLKIN
104	#define CONFIG_8260_CLKIN 66000000 /* in Hz */
105	#endif
106
107	#define CONFIG_BAUDRATE 115200
108
109	#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
110
1bec3d30 JL	111
	112	/*
	113	* Command line configuration.
	114	*/
	115	#include <config_cmd_default.h>
	116
	117
	118	#define CONFIG_CMD_DHCP
	119	#define CONFIG_CMD_ECHO
	120	#define CONFIG_CMD_I2C
	121	#define CONFIG_CMD_IMMAP
	122	#define CONFIG_CMD_MII
	123	#define CONFIG_CMD_PING
	124	#define CONFIG_CMD_DATE
	125	#define CONFIG_CMD_DTT
	126	#define CONFIG_CMD_EEPROM
	127	#define CONFIG_CMD_PCI
	128	#define CONFIG_CMD_DIAG
	129
7ce343e4 WD	130
	131	#define CONFIG_ETHADDR 00:10:EC:00:88:65
	132	#define CONFIG_HAS_ETH1
	133	#define CONFIG_ETH1ADDR 00:10:EC:80:88:65
	134	#define CONFIG_IPADDR 10.0.0.245
	135	#define CONFIG_HOSTNAME EP82xxM
	136	#define CONFIG_SERVERIP 10.0.0.26
	137	#define CONFIG_GATEWAYIP 10.0.0.1
	138	#define CONFIG_NETMASK 255.255.255.0
	139	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	140	#define CFG_ENV_IN_OWN_SECT 1
8078f1a5	141	#define CONFIG_AUTO_COMPLETE 1
7ce343e4 WD	142	#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"
7ce343e4 WD	143
1bec3d30	144	#if defined(CONFIG_CMD_KGDB)
7ce343e4 WD	145	#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
	146	#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
	147	#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
	148	#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
	149	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
	150	#endif
	151
	152	#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
	153	#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
	154
	155	/*
	156	* Miscellaneous configurable options
	157	*/
	158	#define CFG_HUSH_PARSER
	159	#define CFG_PROMPT_HUSH_PS2 "> "
	160	#define CFG_LONGHELP /* undef to save memory */
	161	#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */
1bec3d30	162	#if defined(CONFIG_CMD_KGDB)
7ce343e4 WD	163	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	164	#else
	165	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	166	#endif
	167	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	168	#define CFG_MAXARGS 16 /* max number of command args */
	169	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	170
	171	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	172	#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
	173
	174	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	175
	176	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	177
	178	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
	179
	180	/*-----------------------------------------------------------------------
	181	* Environment
	182	----------------------------------------------------------------------/
	183	/*
	184	* Define here the location of the environment variables (FLASH or EEPROM).
	185	* Note: DENX encourages to use redundant environment in FLASH.
	186	*/
	187	#if 1
	188	#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
	189	#else
	190	#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
	191	#endif
	192
	193	/*-----------------------------------------------------------------------
	194	* FLASH related
	195	----------------------------------------------------------------------/
	196	#define CFG_FLASH_BASE 0xFC000000
	197	#define CFG_FLASH_CFI
	198	#define CFG_FLASH_CFI_DRIVER
	199	#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
	200	#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
	201	#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector in flinfo */
	202
	203	#ifdef CFG_ENV_IS_IN_FLASH
	204	#define CFG_ENV_SECT_SIZE 0x20000
	205	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
	206	#endif /* CFG_ENV_IS_IN_FLASH */
	207
	208	/*-----------------------------------------------------------------------
	209	* I2C
	210	----------------------------------------------------------------------/
	211	/* EEPROM Configuration */
	212	#define CFG_EEPROM_SIZE 0x1000
	213	#define CFG_I2C_EEPROM_ADDR 0x54
	214	#define CFG_I2C_EEPROM_ADDR_LEN 1
	215	#define CFG_EEPROM_PAGE_WRITE_BITS 3
	216	#define CFG_EEPROM_PAGE_WRITE_ENABLE
	217	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
	218
	219	#ifdef CFG_ENV_IS_IN_EEPROM
	220	#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
	221	#define CFG_ENV_OFFSET 0x0
	222	#endif /* CFG_ENV_IS_IN_EEPROM */
	223
	224	/* RTC Configuration */
	225	#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */
	226	#define CFG_I2C_RTC_ADDR 0x68
227	#define CONFIG_M41T11_BASE_YEAR 1900
228
229	/* I2C SYSMON (LM75) */
230	#define CONFIG_DTT_LM75 1
231	#define CONFIG_DTT_SENSORS {0}
232	#define CFG_DTT_MAX_TEMP 70
233	#define CFG_DTT_LOW_TEMP -30
234	#define CFG_DTT_HYSTERESIS 3
235
236	/*-----------------------------------------------------------------------
237	* NVRAM Configuration
238	*-----------------------------------------------------------------------
239	*/
240	#define CFG_NVRAM_BASE_ADDR 0xFA080000
241	#define CFG_NVRAM_SIZE (128*1024)-16
242
243
244	/*-----------------------------------------------------------------------
245	* PCI stuff
246	*-----------------------------------------------------------------------
247	*/
248	/* General PCI */
249	#define CONFIG_PCI /* include pci support */
250	#define CONFIG_PCI_PNP /* do pci plug-and-play */
251	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
252	#define CONFIG_PCI_BOOTDELAY 0
253
254	/* PCI Memory map (if different from default map */
255	#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
256	#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
257	#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB \| PICMR_ENABLE \| \
258	PICMR_PREFETCH_EN)
259
260	/*
261	* These are the windows that allow the CPU to access PCI address space.
262	* All three PCI master windows, which allow the CPU to access PCI
263	* prefetch, non prefetch, and IO space (see below), must all fit within
264	* these windows.
265	*/
266
267	/*
268	* Master window that allows the CPU to access PCI Memory (prefetch).
269	* This window will be setup with the second set of Outbound ATU registers
270	* in the bridge.
271	*/
272
273	#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
274	#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
275	#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
276	#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
277	#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB \| POCMR_ENABLE \| POCMR_PREFETCH_EN)
278
279	/*
280	* Master window that allows the CPU to access PCI Memory (non-prefetch).
281	* This window will be setup with the second set of Outbound ATU registers
282	* in the bridge.
283	*/
284
285	#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
286	#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
287	#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
288	#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
289	#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB \| POCMR_ENABLE)
290
291	/*
292	* Master window that allows the CPU to access PCI IO space.
293	* This window will be setup with the first set of Outbound ATU registers
294	* in the bridge.
295	*/
296
297	#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
298	#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
299	#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
300	#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
301	#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB \| POCMR_ENABLE \| POCMR_PCI_IO)
302
303
304	/* PCIBR0 - for PCI IO*/
305	#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */
306	#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
307	/* PCIBR1 - prefetch and non-prefetch regions joined together */
308	#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
309	#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
310
311
312	#define CFG_DIRECT_FLASH_TFTP
313
1bec3d30	314	#if defined(CONFIG_CMD_JFFS2)
7ce343e4 WD	315	#define CFG_JFFS2_FIRST_BANK 0
	316	#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
	317	#define CFG_JFFS2_FIRST_SECTOR 0
	318	#define CFG_JFFS2_LAST_SECTOR 62
	319	#define CFG_JFFS2_SORT_FRAGMENTS
	320	#define CFG_JFFS_CUSTOM_PART
	321	#endif /* CFG_CMD_JFFS2 */
	322
1bec3d30	323	#if defined(CONFIG_CMD_I2C)
7ce343e4 WD	324	#define CONFIG_HARD_I2C 1 /* To enable I2C support */
	325	#define CFG_I2C_SPEED 100000 /* I2C speed */
	326	#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
	327	#endif /* CFG_CMD_I2C */
	328
	329	#define CFG_MONITOR_BASE TEXT_BASE
	330	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	331	#define CFG_RAMBOOT
	332	#endif
	333
	334	#define CFG_MONITOR_LEN (512 << 10) /* Reserve 256KB for Monitor */
	335
	336	#define CFG_DEFAULT_IMMR 0x00010000
	337	#define CFG_IMMR 0xF0000000
	338
	339	#define CFG_INIT_RAM_ADDR CFG_IMMR
	340	#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
	341	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	342	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	343	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	344
	345
	346	/* Hard reset configuration word */
	347	#define CFG_HRCW_MASTER 0 /0x1C800641/ /* Not used - provided by CPLD */
	348	/* No slaves */
	349	#define CFG_HRCW_SLAVE1 0
	350	#define CFG_HRCW_SLAVE2 0
	351	#define CFG_HRCW_SLAVE3 0
	352	#define CFG_HRCW_SLAVE4 0
	353	#define CFG_HRCW_SLAVE5 0
	354	#define CFG_HRCW_SLAVE6 0
	355	#define CFG_HRCW_SLAVE7 0
	356
	357	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	358	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	359
	360	#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
	361	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	362
	363	#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
1bec3d30	364	#if defined(CONFIG_CMD_KGDB)
7ce343e4 WD	365	#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	366	#endif
	367
	368	#define CFG_HID0_INIT 0
	369	#define CFG_HID0_FINAL 0
	370
	371	#define CFG_HID2 0
	372
	373	#define CFG_SIUMCR 0x02610000
	374	#define CFG_SYPCR 0xFFFF0689
	375	#define CFG_BCR 0x8080E000
	376	#define CFG_SCCR 0x00000001
	377
	378	#define CFG_RMR 0
	379	#define CFG_TMCNTSC 0x000000C3
	380	#define CFG_PISCR 0x00000083
	381	#define CFG_RCCR 0
	382
	383	#define CFG_MPTPR 0x0A00
	384	#define CFG_PSDMR 0xC432246E
	385	#define CFG_PSRT 0x32
	386
	387	#define CFG_SDRAM_BASE 0x00000000
	388	#define CFG_SDRAM_BR (CFG_SDRAM_BASE \| 0x00000041)
	389	#define CFG_SDRAM_OR 0xF0002900
	390
	391	#define CFG_BR0_PRELIM (CFG_FLASH_BASE \| 0x00001801)
	392	#define CFG_OR0_PRELIM 0xFC000882
	393	#define CFG_BR4_PRELIM (CFG_BCSR \| 0x00001001)
	394	#define CFG_OR4_PRELIM 0xFFF00050
	395
	396	#define CFG_RESET_ADDRESS 0xFFF00100
	397
	398	#endif /* __CONFIG_H */