projects / J-u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| c609719b | 1 | /* |
| a471db07 SR |
2 | * (C) Copyright 2007 |
| 3 | * Stefan Roese, DENX Software Engineering, [email protected]. | |
| 4 | * | |
| 5 | * Copyright (C) 2002 Scott McNutt <[email protected]> | |
| 6 | * | |
| 1a459660 | 7 | * SPDX-License-Identifier: GPL-2.0+ |
| a471db07 | 8 | */ |
| c609719b | 9 | |
| 25ddd1fb | 10 | #include <asm-offsets.h> |
| c609719b WD |
11 | #include <ppc_asm.tmpl> |
| 12 | #include <config.h> | |
| 61f2b38a | 13 | #include <asm/mmu.h> |
| c609719b WD |
14 | |
| 15 | /************************************************************************** | |
| 16 | * TLB TABLE | |
| 17 | * | |
| 18 | * This table is used by the cpu boot code to setup the initial tlb | |
| 19 | * entries. Rather than make broad assumptions in the cpu source tree, | |
| 20 | * this table lets each board set things up however they like. | |
| 21 | * | |
| 22 | * Pointer to the table is returned in r1 | |
| 23 | * | |
| 24 | *************************************************************************/ | |
| a471db07 SR |
25 | .section .bootpg,"ax" |
| 26 | .globl tlbtab | |
| c609719b WD |
27 | |
| 28 | tlbtab: | |
| a471db07 SR |
29 | tlbtab_start |
| 30 | ||
| 31 | /* | |
| 32 | * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the | |
| 33 | * speed up boot process. It is patched after relocation to enable SA_I | |
| 34 | */ | |
| 35 | #ifndef CONFIG_NAND_SPL | |
| cf6eb6da | 36 | tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G) |
| a471db07 | 37 | #else |
| cf6eb6da SR |
38 | tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_RWX | SA_G) |
| 39 | tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG) | |
| a471db07 SR |
40 | #endif |
| 41 | ||
| 42 | /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ | |
| cf6eb6da | 43 | tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) |
| a471db07 | 44 | |
| a471db07 | 45 | /* PCI base & peripherals */ |
| cf6eb6da | 46 | tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG) |
| a471db07 | 47 | |
| cf6eb6da SR |
48 | tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I) |
| 49 | tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_RWX | SA_W|SA_I) | |
| a471db07 SR |
50 | |
| 51 | /* PCI */ | |
| cf6eb6da SR |
52 | tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG) |
| 53 | tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG) | |
| 54 | tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG) | |
| 55 | tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG) | |
| a471db07 SR |
56 | |
| 57 | /* USB 2.0 Device */ | |
| cf6eb6da | 58 | tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG) |
| a471db07 SR |
59 | |
| 60 | tlbtab_end | |
| 61 | ||
| 62 | #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) | |
| 63 | /* | |
| 64 | * For NAND booting the first TLB has to be reconfigured to full size | |
| 65 | * and with caching disabled after running from RAM! | |
| 66 | */ | |
| 6d0f6bcf JCPV |
67 | #define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) |
| 68 | #define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0) | |
| cf6eb6da | 69 | #define TLB02 TLB2(AC_RWX | SA_IG) |
| a471db07 SR |
70 | |
| 71 | .globl reconfig_tlb0 | |
| 72 | reconfig_tlb0: | |
| 73 | sync | |
| 74 | isync | |
| 75 | addi r4,r0,0x0000 /* TLB entry #0 */ | |
| 76 | lis r5,TLB00@h | |
| 77 | ori r5,r5,TLB00@l | |
| 78 | tlbwe r5,r4,0x0000 /* Save it out */ | |
| 79 | lis r5,TLB01@h | |
| 80 | ori r5,r5,TLB01@l | |
| 81 | tlbwe r5,r4,0x0001 /* Save it out */ | |
| 82 | lis r5,TLB02@h | |
| 83 | ori r5,r5,TLB02@l | |
| 84 | tlbwe r5,r4,0x0002 /* Save it out */ | |
| 85 | sync | |
| 86 | isync | |
| 87 | blr | |
| 88 | #endif |