pico-imx7d: Enable auxiliary code support

[J-u-boot.git] / configs / conga-qeval20-qa3-e3845-internal-uart_defconfig

CONFIG_X86=y
CONFIG_SYS_TEXT_BASE=0xFFF00000
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_VENDOR_CONGATEC=y
CONFIG_TARGET_CONGA_QEVAL20_QA3_E3845=y
CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
CONFIG_INTERNAL_UART=y
CONFIG_DEBUG_UART=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffb0000
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_SEABIOS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/sda2 ro quiet"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_WINBOND_W83627=y
CONFIG_E1000=y
CONFIG_SPI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5