[J-u-boot.git] / scripts / Makefile.spl

#
# (C) Copyright 2000-2011
# Wolfgang Denk, DENX Software Engineering, [email protected].
#
# (C) Copyright 2011
# Daniel Schwierzeck, [email protected].
#
# (C) Copyright 2011
# Texas Instruments Incorporated - http://www.ti.com/
# Aneesh V <[email protected]>
#
# SPDX-License-Identifier:	GPL-2.0+
#
# Based on top-level Makefile.
#

src := $(obj)

# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))

include $(srctree)/scripts/Kbuild.include

UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)

-include $(obj)/include/config/auto.conf
-include $(obj)/include/autoconf.mk

ifeq ($(CONFIG_TPL_BUILD),y)
export CONFIG_TPL_BUILD
SPL_BIN := u-boot-tpl
else
SPL_BIN := u-boot-spl
endif

include $(srctree)/config.mk

# Enable garbage collection of un-used sections for SPL
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
LDFLAGS_FINAL += --gc-sections

# FIX ME
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
							$(NOSTDINC_FLAGS)

HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)

ifdef	CONFIG_SPL_START_S_PATH
START_PATH := $(CONFIG_SPL_START_S_PATH:"%"=%)
else
START_PATH := $(CPUDIR)
endif

head-y := $(START_PATH)/start.o
head-$(CONFIG_X86) += $(START_PATH)/start16.o $(START_PATH)/resetvec.o
head-$(CONFIG_4xx) += $(START_PATH)/resetvec.o
head-$(CONFIG_MPC85xx) += $(START_PATH)/resetvec.o

libs-y += arch/$(ARCH)/lib/

libs-y += $(CPUDIR)/

libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/

libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
libs-y += fs/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
libs-$(CONFIG_SPL_NET_SUPPORT) += net/
libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/

ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
libs-y += arch/$(ARCH)/imx-common/
endif

libs-$(CONFIG_ARM) += arch/arm/cpu/
libs-$(CONFIG_PPC) += arch/powerpc/cpu/

head-y		:= $(addprefix $(obj)/,$(head-y))
libs-y		:= $(addprefix $(obj)/,$(libs-y))
u-boot-spl-dirs	:= $(patsubst %/,%,$(filter %/, $(libs-y)))

libs-y := $(patsubst %/, %/built-in.o, $(libs-y))

# Add GCC lib
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
endif

u-boot-spl-init := $(head-y)
u-boot-spl-main := $(libs-y)

# Linker Script
ifdef CONFIG_SPL_LDSCRIPT
# need to strip off double quotes
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
endif

ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif

# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
	-include $(srctree)/include/u-boot/u-boot.lds.h \
	-include $(objtree)/include/config.h \
	-DCPUDIR=$(CPUDIR) \
	$(shell $(LD) --version | \
	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')

quiet_cmd_mkimage = MKIMAGE $@
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
	$(if $(KBUILD_VERBOSE:1=), >/dev/null)

MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)

MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)

MLO MLO.byteswap: $(obj)/u-boot-spl.bin
	$(call if_changed,mkimage)

MKIMAGEFLAGS_boot.bin = -T atmelimage

ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)

boot.bin: $(obj)/../tools/atmel_pmecc_params
endif

boot.bin: $(obj)/u-boot-spl.bin
	$(call if_changed,mkimage)

ALL-y	+= $(obj)/$(SPL_BIN).bin

ifdef CONFIG_SAMSUNG
ALL-y	+= $(obj)/$(BOARD)-spl.bin
endif

ifdef CONFIG_SUNXI
ifndef CONFIG_SPL_FEL
ALL-y	+= $(obj)/sunxi-spl.bin
endif
endif

ifeq ($(CONFIG_SYS_SOC),"at91")
ALL-y	+= boot.bin
endif

all:	$(ALL-y)

ifdef CONFIG_SAMSUNG
ifdef CONFIG_VAR_SIZE_SPL
VAR_SIZE_PARAM = --vs
else
VAR_SIZE_PARAM =
endif
$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
	$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
	$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
	$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
endif

quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary

$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
	$(call if_changed,objcopy)

LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
ifneq ($(CONFIG_SPL_TEXT_BASE),)
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
endif

ifdef CONFIG_SUNXI
quiet_cmd_mksunxiboot = MKSUNXI $@
cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
	$(call if_changed,mksunxiboot)
endif

quiet_cmd_u-boot-spl = LD      $@
      cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
		       $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
		       $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
		       $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))

$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
	$(call if_changed,u-boot-spl)

$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;

PHONY += $(u-boot-spl-dirs)
$(u-boot-spl-dirs):
	$(Q)$(MAKE) $(build)=$@

quiet_cmd_cpp_lds = LDS     $@
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
		-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<

$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
	$(call if_changed_dep,cpp_lds)

# read all saved command lines

targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))

ifneq ($(cmd_files),)
  $(cmd_files): ;	# Do not try to update included dependency files
  include $(cmd_files)
endif

PHONY += FORCE
FORCE:

# Declare the contents of the .PHONY variable as phony.  We keep that
# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)
Commit	Line	Data
6a11cf48 DS	1	#
	2	# (C) Copyright 2000-2011
	3	# Wolfgang Denk, DENX Software Engineering, [email protected].
	4	#
	5	# (C) Copyright 2011
	6	# Daniel Schwierzeck, [email protected].
	7	#
	8	# (C) Copyright 2011
	9	# Texas Instruments Incorporated - http://www.ti.com/
	10	# Aneesh V <[email protected]>
	11	#
1a459660	12	# SPDX-License-Identifier: GPL-2.0+
6a11cf48 DS	13	#
	14	# Based on top-level Makefile.
	15	#
	16
9e414032 MY	17	src := $(obj)
	18
	19	# Create output directory if not already present
	20	_dummy := $(shell [ -d $(obj) ] \|\| mkdir -p $(obj))
	21
bf4b3de1 MY	22	include $(srctree)/scripts/Kbuild.include
bf4b3de1 MY	23
51148790	24	UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
6a11cf48	25
51148790 MY	26	-include $(obj)/include/config/auto.conf
51148790 MY	27	-include $(obj)/include/autoconf.mk
e0d5d9f8	28
3aa29de0 YZ	29	ifeq ($(CONFIG_TPL_BUILD),y)
	30	export CONFIG_TPL_BUILD
	31	SPL_BIN := u-boot-tpl
	32	else
	33	SPL_BIN := u-boot-spl
	34	endif
	35
4379ac61	36	include $(srctree)/config.mk
6a11cf48	37
026f9cf2 MY	38	# Enable garbage collection of un-used sections for SPL
	39	KBUILD_CFLAGS += -ffunction-sections -fdata-sections
	40	LDFLAGS_FINAL += --gc-sections
	41
5fe6301a	42	# FIX ME
026f9cf2 MY	43	cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
026f9cf2 MY	44	$(NOSTDINC_FLAGS)
5fe6301a	45
01286329	46	HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
6a11cf48	47
08e4f700	48	ifdef CONFIG_SPL_START_S_PATH
a8c07541	49	START_PATH := $(CONFIG_SPL_START_S_PATH:"%"=%)
08e4f700 MV	50	else
	51	START_PATH := $(CPUDIR)
	52	endif
	53
e8a8b824 MY	54	head-y := $(START_PATH)/start.o
	55	head-$(CONFIG_X86) += $(START_PATH)/start16.o $(START_PATH)/resetvec.o
	56	head-$(CONFIG_4xx) += $(START_PATH)/resetvec.o
	57	head-$(CONFIG_MPC85xx) += $(START_PATH)/resetvec.o
6a11cf48	58
656de6b8	59	libs-y += arch/$(ARCH)/lib/
510ed3b8	60
656de6b8	61	libs-y += $(CPUDIR)/
510ed3b8	62
bf69d664	63	libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
656de6b8 MY	64	libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
	65
	66	libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
	67	libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
	68	libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
	69	libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
	70	libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
	71	libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
	72	libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
	73	libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
	74	libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
	75	libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
	76	libs-y += fs/
	77	libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
	78	libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
6dd3b566	79	libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
167544e8	80	libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
656de6b8 MY	81	libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
	82	libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
	83	libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
	84	libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
	85	libs-$(CONFIG_SPL_NET_SUPPORT) += net/
	86	libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
	87	libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
	88	libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
	89	libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
	90	libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
	91	libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
	92	libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
	93	libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
	94	libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
efcc6096	95
ba931259	96	ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
656de6b8	97	libs-y += arch/$(ARCH)/imx-common/
cfb8e87a MV	98	endif
cfb8e87a MV	99
656de6b8 MY	100	libs-$(CONFIG_ARM) += arch/arm/cpu/
656de6b8 MY	101	libs-$(CONFIG_PPC) += arch/powerpc/cpu/
d9e73a87	102
656de6b8 MY	103	head-y := $(addprefix $(obj)/,$(head-y))
	104	libs-y := $(addprefix $(obj)/,$(libs-y))
	105	u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
	106
	107	libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
e2906a59	108
660e98f2	109	# Add GCC lib
cd2e46cb	110	ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
a86cf89c	111	PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
6445262c	112	PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
660e98f2 AM	113	endif
660e98f2 AM	114
656de6b8 MY	115	u-boot-spl-init := $(head-y)
656de6b8 MY	116	u-boot-spl-main := $(libs-y)
6a11cf48 DS	117
	118	# Linker Script
	119	ifdef CONFIG_SPL_LDSCRIPT
	120	# need to strip off double quotes
01286329	121	LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
6a11cf48 DS	122	endif
	123
	124	ifeq ($(wildcard $(LDSCRIPT)),)
4379ac61	125	LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
6a11cf48 DS	126	endif
6a11cf48 DS	127	ifeq ($(wildcard $(LDSCRIPT)),)
4379ac61	128	LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
6a11cf48	129	endif
ee60197e	130	ifeq ($(wildcard $(LDSCRIPT)),)
4379ac61	131	LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
ee60197e	132	endif
6a11cf48 DS	133	ifeq ($(wildcard $(LDSCRIPT)),)
	134	$(error could not find linker script)
	135	endif
	136
	137	# Special flags for CPP when processing the linker script.
	138	# Pass the version down so we can handle backwards compatibility
	139	# on the fly.
	140	LDPPFLAGS += \
4379ac61	141	-include $(srctree)/include/u-boot/u-boot.lds.h \
5ee828ca	142	-include $(objtree)/include/config.h \
7e6403a6	143	-DCPUDIR=$(CPUDIR) \
6a11cf48 DS	144	$(shell $(LD) --version \| \
	145	sed -ne 's/GNU ld version \([0-9][0-9]\)\.\([0-9][0-9]\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
	146
b97241b3	147	quiet_cmd_mkimage = MKIMAGE $@
9bf215b0 MY	148	cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
9bf215b0 MY	149	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
79b9ebb7	150
9bf215b0 MY	151	MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
	152
	153	MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
	154
	155	MLO MLO.byteswap: $(obj)/u-boot-spl.bin
	156	$(call if_changed,mkimage)
3decb14a	157
5c390a5b AB	158	MKIMAGEFLAGS_boot.bin = -T atmelimage
	159
	160	ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
	161	MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
	162
	163	boot.bin: $(obj)/../tools/atmel_pmecc_params
	164	endif
	165
	166	boot.bin: $(obj)/u-boot-spl.bin
	167	$(call if_changed,mkimage)
	168
9e414032	169	ALL-y += $(obj)/$(SPL_BIN).bin
6a11cf48	170
98a48c5d	171	ifdef CONFIG_SAMSUNG
9e414032	172	ALL-y += $(obj)/$(BOARD)-spl.bin
98a48c5d CK	173	endif
98a48c5d CK	174
50827a59 IC	175	ifdef CONFIG_SUNXI
	176	ifndef CONFIG_SPL_FEL
	177	ALL-y += $(obj)/sunxi-spl.bin
	178	endif
	179	endif
	180
c001486d HS	181	ifeq ($(CONFIG_SYS_SOC),"at91")
	182	ALL-y += boot.bin
	183	endif
	184
6a11cf48 DS	185	all: $(ALL-y)
6a11cf48 DS	186
98a48c5d	187	ifdef CONFIG_SAMSUNG
0fcac1ab RS	188	ifdef CONFIG_VAR_SIZE_SPL
	189	VAR_SIZE_PARAM = --vs
	190	else
	191	VAR_SIZE_PARAM =
	192	endif
9e414032	193	$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
5ee828ca MY	194	$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
	195	$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
	196	$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
98a48c5d CK	197	endif
98a48c5d CK	198
f9c235fd MY	199	quiet_cmd_objcopy = OBJCOPY $@
	200	cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
	201
	202	OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
	203
	204	$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
	205	$(call if_changed,objcopy)
6a11cf48	206
9e414032	207	LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
e0d5d9f8 MY	208	ifneq ($(CONFIG_SPL_TEXT_BASE),)
	209	LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
	210	endif
	211
50827a59 IC	212	ifdef CONFIG_SUNXI
	213	quiet_cmd_mksunxiboot = MKSUNXI $@
	214	cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
	215	$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
	216	$(call if_changed,mksunxiboot)
	217	endif
	218
656de6b8	219	quiet_cmd_u-boot-spl = LD $@
9adb6d24	220	cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
656de6b8 MY	221	$(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
656de6b8 MY	222	$(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
9adb6d24	223	$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
6a11cf48	224
9adb6d24 MY	225	$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
9adb6d24 MY	226	$(call if_changed,u-boot-spl)
6a11cf48	227
656de6b8	228	$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
6a11cf48	229
656de6b8 MY	230	PHONY += $(u-boot-spl-dirs)
	231	$(u-boot-spl-dirs):
	232	$(Q)$(MAKE) $(build)=$@
6a11cf48	233
04a34c96	234	quiet_cmd_cpp_lds = LDS $@
395e60cd MY	235	cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
395e60cd MY	236	-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
04a34c96	237
6825a95b	238	$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
395e60cd	239	$(call if_changed_dep,cpp_lds)
6a11cf48	240
f9c235fd MY	241	# read all saved command lines
	242
	243	targets := $(wildcard $(sort $(targets)))
	244	cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
	245
	246	ifneq ($(cmd_files),)
	247	$(cmd_files): ; # Do not try to update included dependency files
	248	include $(cmd_files)
	249	endif
	250
6825a95b MY	251	PHONY += FORCE
	252	FORCE:
	253
	254	# Declare the contents of the .PHONY variable as phony. We keep that
	255	# information in a variable so we can use it in if_changed and friends.
	256	.PHONY: $(PHONY)