[J-u-boot.git] / include / configs / M5329EVB.h

/*
 * Configuation settings for the Freescale MCF5329 FireEngine board.
 *
 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
 * TsiChung Liew ([email protected])
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef _M5329EVB_H
#define _M5329EVB_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT		(0)
#define CONFIG_BAUDRATE		115200

#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */

/* Command line configuration */
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO

#ifdef CONFIG_NANDFLASH_SIZE
#      define CONFIG_CMD_NAND
#endif

#define CONFIG_SYS_UNIFY_CACHE

#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
#	define CONFIG_MII		1
#	define CONFIG_MII_INIT		1
#	define CONFIG_SYS_DISCOVER_PHY
#	define CONFIG_SYS_RX_ETH_BUFFER	8
#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN

#	define CONFIG_SYS_FEC0_PINMUX		0
#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
#	define MCFFEC_TOUT_LOOP		50000
/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
#	ifndef CONFIG_SYS_DISCOVER_PHY
#		define FECDUPLEX	FULL
#		define FECSPEED		_100BASET
#	else
#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#		endif
#	endif			/* CONFIG_SYS_DISCOVER_PHY */
#endif

#define CONFIG_MCFRTC
#undef RTC_DEBUG

/* Timer */
#define CONFIG_MCFTMR
#undef CONFIG_MCFPIT

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	80000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR

#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
#define CONFIG_UDP_CHECKSUM

#ifdef CONFIG_MCFFEC
#	define CONFIG_IPADDR	192.162.1.2
#	define CONFIG_NETMASK	255.255.255.0
#	define CONFIG_SERVERIP	192.162.1.1
#	define CONFIG_GATEWAYIP	192.162.1.1
#endif				/* FEC_ENET */

#define CONFIG_HOSTNAME		M5329EVB
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"			\
	"loadaddr=40010000\0"	\
	"u-boot=u-boot.bin\0"	\
	"load=tftp ${loadaddr) ${u-boot}\0"	\
	"upd=run load; run prog\0"	\
	"prog=prot off 0 3ffff;"	\
	"era 0 3ffff;"	\
	"cp.b ${loadaddr} 0 ${filesize};"	\
	"save\0"	\
	""

#define CONFIG_PRAM		512	/* 512 KB */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#ifdef CONFIG_CMD_KGDB
#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
#else
#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
#endif

#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
#define CONFIG_SYS_LOAD_ADDR		0x40010000

#define CONFIG_SYS_CLK			80000000
#define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3

#define CONFIG_SYS_MBAR		0xFC000000

#define CONFIG_SYS_LATCH_ADDR		(CONFIG_SYS_CS1_BASE + 0x80000)

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in internal SRAM */
#define CONFIG_SYS_INIT_RAM_CTRL	0x221
#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x40000000
#define CONFIG_SYS_SDRAM_SIZE		32	/* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_CFG1		0x53722730
#define CONFIG_SYS_SDRAM_CFG2		0x56670000
#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
#define CONFIG_SYS_SDRAM_EMOD		0x40010000
#define CONFIG_SYS_SDRAM_MODE		0x018D0000

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)

#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */

#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization ??
 */
#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
#define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI
#	define CONFIG_FLASH_CFI_DRIVER	1
#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
#endif

#ifdef CONFIG_NANDFLASH_SIZE
#	define CONFIG_SYS_MAX_NAND_DEVICE	1
#	define CONFIG_SYS_NAND_BASE		CONFIG_SYS_CS2_BASE
#	define CONFIG_SYS_NAND_SIZE		1
#	define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
#	define NAND_ALLOW_ERASE_ALL	1
#	define CONFIG_JFFS2_NAND	1
#	define CONFIG_JFFS2_DEV		"nand0"
#	define CONFIG_JFFS2_PART_SIZE	(CONFIG_SYS_CS2_MASK & ~1)
#	define CONFIG_JFFS2_PART_OFFSET	0x00000000
#endif

#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE

/* Configuration for environment
 * Environment is embedded in u-boot in the second sector of the flash
 */
#define CONFIG_ENV_OFFSET		0x4000
#define CONFIG_ENV_SECT_SIZE	0x2000
#define CONFIG_ENV_IS_IN_FLASH	1

#define LDS_BOARD_TEXT \
        . = DEFINED(env_offset) ? env_offset : .; \
        common/env_embedded.o (.text*);

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	16

#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 8)
#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 4)
#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
					 CF_ACR_EN | CF_ACR_SM_ALL)
#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
					 CF_CACR_DCM_P)

/*-----------------------------------------------------------------------
 * Chipselect bank definitions
 */
/*
 * CS0 - NOR Flash 1, 2, 4, or 8MB
 * CS1 - CompactFlash and registers
 * CS2 - NAND Flash 16, 32, or 64MB
 * CS3 - Available
 * CS4 - Available
 * CS5 - Available
 */
#define CONFIG_SYS_CS0_BASE		0
#define CONFIG_SYS_CS0_MASK		0x007f0001
#define CONFIG_SYS_CS0_CTRL		0x00001fa0

#define CONFIG_SYS_CS1_BASE		0x10000000
#define CONFIG_SYS_CS1_MASK		0x001f0001
#define CONFIG_SYS_CS1_CTRL		0x002A3780

#ifdef CONFIG_NANDFLASH_SIZE
#define CONFIG_SYS_CS2_BASE		0x20000000
#define CONFIG_SYS_CS2_MASK		((CONFIG_NANDFLASH_SIZE << 20) | 1)
#define CONFIG_SYS_CS2_CTRL		0x00001f60
#endif

#endif				/* _M5329EVB_H */
Commit	Line	Data
8e585f02 TL	1	/*
	2	* Configuation settings for the Freescale MCF5329 FireEngine board.
	3	*
	4	* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
	5	* TsiChung Liew ([email protected])
	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
8e585f02 TL	8	*/
	9
	10	/*
	11	* board/config.h - configuration options, board specific
	12	*/
	13
	14	#ifndef _M5329EVB_H
	15	#define _M5329EVB_H
	16
	17	/*
	18	* High Level Configuration Options
	19	* (easy to change)
	20	*/
8e585f02	21
9998bd37	22	#define CONFIG_MCFUART
6d0f6bcf	23	#define CONFIG_SYS_UART_PORT (0)
8e585f02	24	#define CONFIG_BAUDRATE 115200
8e585f02 TL	25
	26	#undef CONFIG_WATCHDOG
	27	#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
	28
ab77bc54	29	/* Command line configuration */
ab77bc54 TL	30	#define CONFIG_CMD_CACHE
ab77bc54 TL	31	#define CONFIG_CMD_DATE
ab77bc54	32	#define CONFIG_CMD_I2C
ab77bc54	33	#define CONFIG_CMD_MII
ab77bc54 TL	34	#define CONFIG_CMD_PING
ab77bc54 TL	35	#define CONFIG_CMD_REGINFO
0dca874d	36
96d94385	37	#ifdef CONFIG_NANDFLASH_SIZE
ab77bc54	38	# define CONFIG_CMD_NAND
1a33ce65 TL	39	#endif
1a33ce65 TL	40
6d0f6bcf	41	#define CONFIG_SYS_UNIFY_CACHE
8e585f02 TL	42
	43	#define CONFIG_MCFFEC
	44	#ifdef CONFIG_MCFFEC
8e585f02	45	# define CONFIG_MII 1
0f3ba7e9	46	# define CONFIG_MII_INIT 1
6d0f6bcf JCPV	47	# define CONFIG_SYS_DISCOVER_PHY
	48	# define CONFIG_SYS_RX_ETH_BUFFER 8
	49	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
8e585f02	50
6d0f6bcf JCPV	51	# define CONFIG_SYS_FEC0_PINMUX 0
6d0f6bcf JCPV	52	# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
53677ef1	53	# define MCFFEC_TOUT_LOOP 50000
6d0f6bcf JCPV	54	/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
6d0f6bcf JCPV	55	# ifndef CONFIG_SYS_DISCOVER_PHY
8e585f02 TL	56	# define FECDUPLEX FULL
	57	# define FECSPEED _100BASET
	58	# else
6d0f6bcf JCPV	59	# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
6d0f6bcf JCPV	60	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
8e585f02	61	# endif
6d0f6bcf	62	# endif /* CONFIG_SYS_DISCOVER_PHY */
8e585f02 TL	63	#endif
8e585f02 TL	64
8e585f02	65	#define CONFIG_MCFRTC
48dbfeab	66	#undef RTC_DEBUG
8e585f02 TL	67
	68	/* Timer */
	69	#define CONFIG_MCFTMR
8e585f02	70	#undef CONFIG_MCFPIT
8e585f02	71
eaf9e447	72	/* I2C */
00f792e0 HS	73	#define CONFIG_SYS_I2C
	74	#define CONFIG_SYS_I2C_FSL
	75	#define CONFIG_SYS_FSL_I2C_SPEED 80000
	76	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	77	#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000
6d0f6bcf	78	#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
eaf9e447	79
8e585f02	80	#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
ab77bc54 TL	81	#define CONFIG_UDP_CHECKSUM
ab77bc54 TL	82
8e585f02	83	#ifdef CONFIG_MCFFEC
eaf9e447 TL	84	# define CONFIG_IPADDR 192.162.1.2
	85	# define CONFIG_NETMASK 255.255.255.0
	86	# define CONFIG_SERVERIP 192.162.1.1
8e585f02	87	# define CONFIG_GATEWAYIP 192.162.1.1
8e585f02 TL	88	#endif /* FEC_ENET */
	89
	90	#define CONFIG_HOSTNAME M5329EVB
	91	#define CONFIG_EXTRA_ENV_SETTINGS \
	92	"netdev=eth0\0" \
	93	"loadaddr=40010000\0" \
	94	"u-boot=u-boot.bin\0" \
	95	"load=tftp ${loadaddr) ${u-boot}\0" \
	96	"upd=run load; run prog\0" \
09933fb0 JJ	97	"prog=prot off 0 3ffff;" \
09933fb0 JJ	98	"era 0 3ffff;" \
8e585f02 TL	99	"cp.b ${loadaddr} 0 ${filesize};" \
	100	"save\0" \
	101	""
	102
eaf9e447	103	#define CONFIG_PRAM 512 /* 512 KB */
6d0f6bcf	104	#define CONFIG_SYS_LONGHELP /* undef to save memory */
8e585f02	105
ab77bc54	106	#ifdef CONFIG_CMD_KGDB
6d0f6bcf	107	# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
8e585f02	108	#else
6d0f6bcf	109	# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
8e585f02 TL	110	#endif
8e585f02 TL	111
6d0f6bcf JCPV	112	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	113	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	114	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	115	#define CONFIG_SYS_LOAD_ADDR 0x40010000
8e585f02	116
6d0f6bcf JCPV	117	#define CONFIG_SYS_CLK 80000000
6d0f6bcf JCPV	118	#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
8e585f02	119
6d0f6bcf	120	#define CONFIG_SYS_MBAR 0xFC000000
8e585f02	121
6d0f6bcf	122	#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)
1a33ce65	123
8e585f02 TL	124	/*
	125	* Low Level Configuration Settings
	126	* (address mappings, register initial values, etc.)
	127	* You should know what you are doing if you make changes here.
	128	*/
	129	/*-----------------------------------------------------------------------
	130	* Definitions for initial stack pointer and data area (in DPRAM)
	131	*/
6d0f6bcf	132	#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
553f0982	133	#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */
6d0f6bcf	134	#define CONFIG_SYS_INIT_RAM_CTRL 0x221
25ddd1fb	135	#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
6d0f6bcf	136	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
8e585f02 TL	137
	138	/*-----------------------------------------------------------------------
	139	* Start addresses for the final memory configuration
	140	* (Set up by the startup code)
6d0f6bcf	141	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
8e585f02	142	*/
6d0f6bcf JCPV	143	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	144	#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */
	145	#define CONFIG_SYS_SDRAM_CFG1 0x53722730
	146	#define CONFIG_SYS_SDRAM_CFG2 0x56670000
	147	#define CONFIG_SYS_SDRAM_CTRL 0xE1092000
	148	#define CONFIG_SYS_SDRAM_EMOD 0x40010000
	149	#define CONFIG_SYS_SDRAM_MODE 0x018D0000
8e585f02	150
6d0f6bcf JCPV	151	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
6d0f6bcf JCPV	152	#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
8e585f02	153
6d0f6bcf JCPV	154	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
6d0f6bcf JCPV	155	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
8e585f02	156
6d0f6bcf JCPV	157	#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
6d0f6bcf JCPV	158	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
8e585f02 TL	159
	160	/*
	161	* For booting Linux, the board info and command line data
	162	* have to be in the first 8 MB of memory, since this is
	163	* the maximum mapped by the Linux kernel during initialization ??
	164	*/
6d0f6bcf	165	#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
d6e4baf4	166	#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20)
8e585f02 TL	167
	168	/*-----------------------------------------------------------------------
	169	* FLASH organization
	170	*/
6d0f6bcf JCPV	171	#define CONFIG_SYS_FLASH_CFI
6d0f6bcf JCPV	172	#ifdef CONFIG_SYS_FLASH_CFI
00b1883a	173	# define CONFIG_FLASH_CFI_DRIVER 1
6d0f6bcf JCPV	174	# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */
	175	# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	176	# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	177	# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
	178	# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
8e585f02 TL	179	#endif
8e585f02 TL	180
96d94385	181	#ifdef CONFIG_NANDFLASH_SIZE
6d0f6bcf JCPV	182	# define CONFIG_SYS_MAX_NAND_DEVICE 1
	183	# define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE
	184	# define CONFIG_SYS_NAND_SIZE 1
	185	# define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
ab77bc54 TL	186	# define NAND_ALLOW_ERASE_ALL 1
	187	# define CONFIG_JFFS2_NAND 1
	188	# define CONFIG_JFFS2_DEV "nand0"
6d0f6bcf	189	# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1)
ab77bc54	190	# define CONFIG_JFFS2_PART_OFFSET 0x00000000
1a33ce65 TL	191	#endif
1a33ce65 TL	192
6d0f6bcf	193	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
8e585f02 TL	194
	195	/* Configuration for environment
	196	* Environment is embedded in u-boot in the second sector of the flash
	197	*/
0e8d1586 JCPV	198	#define CONFIG_ENV_OFFSET 0x4000
0e8d1586 JCPV	199	#define CONFIG_ENV_SECT_SIZE 0x2000
5a1aceb0	200	#define CONFIG_ENV_IS_IN_FLASH 1
8e585f02	201
5296cb1d	202	#define LDS_BOARD_TEXT \
	203	. = DEFINED(env_offset) ? env_offset : .; \
	204	common/env_embedded.o (.text*);
	205
8e585f02 TL	206	/*-----------------------------------------------------------------------
	207	* Cache Configuration
	208	*/
6d0f6bcf	209	#define CONFIG_SYS_CACHELINE_SIZE 16
8e585f02	210
dd9f054e	211	#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	212	CONFIG_SYS_INIT_RAM_SIZE - 8)
dd9f054e	213	#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	214	CONFIG_SYS_INIT_RAM_SIZE - 4)
dd9f054e TL	215	#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
	216	#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE \| \
	217	CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) \| \
	218	CF_ACR_EN \| CF_ACR_SM_ALL)
	219	#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC \| CF_CACR_CINVA \| \
	220	CF_CACR_DCM_P)
	221
8e585f02 TL	222	/*-----------------------------------------------------------------------
	223	* Chipselect bank definitions
	224	*/
	225	/*
	226	* CS0 - NOR Flash 1, 2, 4, or 8MB
	227	* CS1 - CompactFlash and registers
	228	* CS2 - NAND Flash 16, 32, or 64MB
	229	* CS3 - Available
	230	* CS4 - Available
	231	* CS5 - Available
	232	*/
6d0f6bcf JCPV	233	#define CONFIG_SYS_CS0_BASE 0
	234	#define CONFIG_SYS_CS0_MASK 0x007f0001
	235	#define CONFIG_SYS_CS0_CTRL 0x00001fa0
8e585f02	236
6d0f6bcf JCPV	237	#define CONFIG_SYS_CS1_BASE 0x10000000
	238	#define CONFIG_SYS_CS1_MASK 0x001f0001
	239	#define CONFIG_SYS_CS1_CTRL 0x002A3780
8e585f02	240
96d94385	241	#ifdef CONFIG_NANDFLASH_SIZE
6d0f6bcf	242	#define CONFIG_SYS_CS2_BASE 0x20000000
96d94385	243	#define CONFIG_SYS_CS2_MASK ((CONFIG_NANDFLASH_SIZE << 20) \| 1)
6d0f6bcf	244	#define CONFIG_SYS_CS2_CTRL 0x00001f60
8e585f02 TL	245	#endif
8e585f02 TL	246
8e585f02	247	#endif /* _M5329EVB_H */