[J-u-boot.git] / include / configs / aristainetos-common.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2015
 * (C) Copyright 2014
 * Heiko Schocher, DENX Software Engineering, [email protected].
 *
 * Based on:
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6Q SabreSD board.
 */
#ifndef __ARISTAINETOS_COMMON_CONFIG_H
#define __ARISTAINETOS_COMMON_CONFIG_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4501
#define CONFIG_MMCROOT		"/dev/mmcblk0p1"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(64 * SZ_1M)

#define CONFIG_MXC_UART

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

#define CONFIG_FEC_MXC
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0

#define CONFIG_SPI_FLASH_MTD
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=u-boot.scr\0" \
	"fit_file=/boot/system.itb\0" \
	"loadaddr=0x12000000\0" \
	"fit_addr_r=0x14000000\0" \
	"uboot=/boot/u-boot.imx\0" \
	"uboot_sz=d0000\0" \
	"rescue_sys_addr=f0000\0" \
	"rescue_sys_length=f10000\0" \
	"panel=lb07wv8\0" \
	"splashpos=m,m\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
		"default ${board_type}\0" \
	"get_env=mw ${loadaddr} 0 0x20000;" \
		"mmc rescan;" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
		"env import -t ${loadaddr}\0" \
	"default_env=mw ${loadaddr} 0 0x20000;" \
		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
		"board_type panel;" \
		"env default -a;" \
		"env import -t ${loadaddr}\0" \
	"loadbootscript=" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"mmcpart=1\0" \
	"mmcdev=0\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
		"${fit_file}\0" \
	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
		"${uboot}\0" \
	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
		"sf write ${loadaddr} 400 ${filesize};" \
		"sf read ${cmp_buf} 400 ${uboot_sz};" \
		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	"ubiboot=echo Booting from ubi ...; " \
		"run ubiargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"rescueargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/ram rw\0 " \
	"rescueboot=echo Booting rescue system from NOR ...; " \
		"run rescueargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
		"${rescue_sys_length}; imi ${fit_addr_r}\0" \
	CONFIG_EXTRA_ENV_BOARD_SETTINGS

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run mmc_load_fit; then " \
				"run mmcboot; " \
			"else " \
				"if run ubifs_load_fit; then " \
					"run ubiboot; " \
				"else " \
					"if run rescue_load_fit; then " \
						"run rescueboot; " \
					"else " \
						"echo RESCUE SYSTEM BOOT " \
							"FAILURE;" \
					"fi; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"else " \
		"if run ubifs_load_fit; then " \
			"run ubiboot; " \
		"else " \
			"if run rescue_load_fit; then " \
				"run rescueboot; " \
			"else " \
				"echo RESCUE SYSTEM BOOT FAILURE;" \
			"fi; " \
		"fi; " \
	"fi"

#define CONFIG_ARP_TIMEOUT		200UL

#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

/* Physical Memory Map */
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(12 * 1024)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SECT_SIZE		(0x010000)
#define CONFIG_ENV_OFFSET		(0x0d0000)
#define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)

#define CONFIG_SYS_FSL_USDHC_NUM	2

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		0x7f
#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }

/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */

/* RTC */
#define CONFIG_SYS_I2C_RTC_ADDR	0x68
#define CONFIG_SYS_RTC_BUS_NUM	2
#define CONFIG_RTC_M41T11

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* UBI support */

/* Framebuffer */
#define CONFIG_VIDEO_IPUV3
/* check this console not needed, after test remove it */
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK	66000000

#endif /* __ARISTAINETOS_COMMON_CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
7254d92e HS	2	/*
	3	* (C) Copyright 2015
	4	* (C) Copyright 2014
	5	* Heiko Schocher, DENX Software Engineering, [email protected].
	6	*
	7	* Based on:
	8	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	9	*
	10	* Configuration settings for the Freescale i.MX6Q SabreSD board.
7254d92e HS	11	*/
	12	#ifndef __ARISTAINETOS_COMMON_CONFIG_H
	13	#define __ARISTAINETOS_COMMON_CONFIG_H
	14
7254d92e	15	#include "mx6_common.h"
7254d92e	16
7254d92e HS	17	#define CONFIG_MACH_TYPE 4501
7254d92e HS	18	#define CONFIG_MMCROOT "/dev/mmcblk0p1"
7254d92e	19
7254d92e HS	20	/* Size of malloc() pool */
	21	#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
	22
7254d92e HS	23	#define CONFIG_MXC_UART
7254d92e HS	24
7254d92e	25	/* MMC Configs */
7254d92e HS	26	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
7254d92e HS	27
7254d92e	28	#define CONFIG_FEC_MXC
7254d92e HS	29	#define IMX_FEC_BASE ENET_BASE_ADDR
	30	#define CONFIG_ETHPRIME "FEC"
	31	#define CONFIG_FEC_MXC_PHYADDR 0
	32
7254d92e	33	#define CONFIG_SPI_FLASH_MTD
7254d92e HS	34	#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
7254d92e HS	35
7254d92e HS	36	#define CONFIG_EXTRA_ENV_SETTINGS \
	37	"script=u-boot.scr\0" \
	38	"fit_file=/boot/system.itb\0" \
	39	"loadaddr=0x12000000\0" \
	40	"fit_addr_r=0x14000000\0" \
	41	"uboot=/boot/u-boot.imx\0" \
	42	"uboot_sz=d0000\0" \
	43	"rescue_sys_addr=f0000\0" \
	44	"rescue_sys_length=f10000\0" \
	45	"panel=lb07wv8\0" \
	46	"splashpos=m,m\0" \
12ca05a3	47	"console=" CONSOLE_DEV "\0" \
7254d92e HS	48	"fdt_high=0xffffffff\0" \
	49	"initrd_high=0xffffffff\0" \
	50	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	51	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
	52	"default ${board_type}\0" \
	53	"get_env=mw ${loadaddr} 0 0x20000;" \
	54	"mmc rescan;" \
	55	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
	56	"env import -t ${loadaddr}\0" \
	57	"default_env=mw ${loadaddr} 0 0x20000;" \
	58	"env export -t ${loadaddr} serial# ethaddr eth1addr " \
	59	"board_type panel;" \
	60	"env default -a;" \
	61	"env import -t ${loadaddr}\0" \
	62	"loadbootscript=" \
	63	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	64	"bootscript=echo Running bootscript from mmc ...; " \
	65	"source\0" \
	66	"mmcpart=1\0" \
	67	"mmcdev=0\0" \
	68	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	69	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	70	"root=${mmcroot}\0" \
	71	"mmcboot=echo Booting from mmc ...; " \
	72	"run mmcargs addmtd addmisc set_fit_default;" \
	73	"bootm ${fit_addr_r}\0" \
	74	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
	75	"${fit_file}\0" \
	76	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
	77	"${uboot}\0" \
	78	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
	79	"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
	80	"setexpr uboot_maxsize ${uboot_sz} - 400;" \
	81	"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
	82	"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
	83	"sf write ${loadaddr} 400 ${filesize};" \
	84	"sf read ${cmp_buf} 400 ${uboot_sz};" \
	85	"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	86	"ubiboot=echo Booting from ubi ...; " \
	87	"run ubiargs addmtd addmisc set_fit_default;" \
	88	"bootm ${fit_addr_r}\0" \
7254d92e HS	89	"rescueargs=setenv bootargs console=${console},${baudrate} " \
	90	"root=/dev/ram rw\0 " \
	91	"rescueboot=echo Booting rescue system from NOR ...; " \
	92	"run rescueargs addmtd addmisc set_fit_default;" \
	93	"bootm ${fit_addr_r}\0" \
	94	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
	95	"${rescue_sys_length}; imi ${fit_addr_r}\0" \
	96	CONFIG_EXTRA_ENV_BOARD_SETTINGS
	97
	98	#define CONFIG_BOOTCOMMAND \
	99	"mmc dev ${mmcdev};" \
	100	"if mmc rescan; then " \
	101	"if run loadbootscript; then " \
	102	"run bootscript; " \
	103	"else " \
	104	"if run mmc_load_fit; then " \
	105	"run mmcboot; " \
	106	"else " \
	107	"if run ubifs_load_fit; then " \
	108	"run ubiboot; " \
	109	"else " \
	110	"if run rescue_load_fit; then " \
	111	"run rescueboot; " \
	112	"else " \
	113	"echo RESCUE SYSTEM BOOT " \
	114	"FAILURE;" \
	115	"fi; " \
	116	"fi; " \
	117	"fi; " \
	118	"fi; " \
	119	"else " \
	120	"if run ubifs_load_fit; then " \
	121	"run ubiboot; " \
	122	"else " \
	123	"if run rescue_load_fit; then " \
	124	"run rescueboot; " \
	125	"else " \
	126	"echo RESCUE SYSTEM BOOT FAILURE;" \
	127	"fi; " \
	128	"fi; " \
	129	"fi"
	130
	131	#define CONFIG_ARP_TIMEOUT 200UL
	132
7254d92e HS	133	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	134	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
	135	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	136
7254d92e	137	/* Physical Memory Map */
7254d92e HS	138	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	139
	140	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	141	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	142	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	143
	144	#define CONFIG_SYS_INIT_SP_OFFSET \
	145	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	146	#define CONFIG_SYS_INIT_SP_ADDR \
	147	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	148
056845c2	149	/* Environment organization */
7254d92e	150	#define CONFIG_ENV_SIZE (12 * 1024)
7254d92e HS	151	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	152	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	153	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	154	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	155	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	156	#define CONFIG_ENV_SECT_SIZE (0x010000)
	157	#define CONFIG_ENV_OFFSET (0x0d0000)
	158	#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
	159
7254d92e HS	160	#define CONFIG_SYS_FSL_USDHC_NUM 2
	161
	162	/* I2C */
7254d92e HS	163	#define CONFIG_SYS_I2C
7254d92e HS	164	#define CONFIG_SYS_I2C_MXC
03544c66 AA	165	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	166	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
7254d92e HS	167	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	168	#define CONFIG_SYS_I2C_SPEED 100000
	169	#define CONFIG_SYS_I2C_SLAVE 0x7f
	170	#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
	171
7254d92e	172	/* NAND stuff */
7254d92e HS	173	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	174	#define CONFIG_SYS_NAND_BASE 0x40000000
	175	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	176	#define CONFIG_SYS_NAND_ONFI_DETECTION
	177
	178	/* DMA stuff, needed for GPMI/MXS NAND support */
7254d92e HS	179
	180	/* RTC */
	181	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	182	#define CONFIG_SYS_RTC_BUS_NUM 2
	183	#define CONFIG_RTC_M41T11
7254d92e HS	184
7254d92e HS	185	/* USB Configs */
7254d92e HS	186	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	187	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	188	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	189	#define CONFIG_MXC_USB_FLAGS 0
	190
	191	/* UBI support */
7254d92e	192
7254d92e	193	/* Framebuffer */
7254d92e HS	194	#define CONFIG_VIDEO_IPUV3
7254d92e HS	195	/* check this console not needed, after test remove it */
7254d92e HS	196	#define CONFIG_VIDEO_BMP_RLE8
	197	#define CONFIG_SPLASH_SCREEN
	198	#define CONFIG_SPLASH_SCREEN_ALIGN
	199	#define CONFIG_BMP_16BPP
	200	#define CONFIG_VIDEO_LOGO
	201	#define CONFIG_VIDEO_BMP_LOGO
7254d92e HS	202	#define CONFIG_IMX_VIDEO_SKIP
7254d92e HS	203
7254d92e HS	204	#define CONFIG_PWM_IMX
	205	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	206
	207	#endif /* __ARISTAINETOS_COMMON_CONFIG_H */