projects / J-u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 689551c5 GL |
1 | /* |
| 2 | * Copyright (C) 2009 | |
| 3 | * Guennadi Liakhovetski, DENX Software Engineering, <[email protected]> | |
| 4 | * | |
| 1a459660 | 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 689551c5 GL |
6 | */ |
| 7 | #include <common.h> | |
| 8 | #include <spi.h> | |
| 9 | #include <s6e63d6.h> | |
| 10 | ||
| 11 | /* | |
| 12 | * Each transfer is performed as: | |
| 13 | * 1. chip-select active | |
| 14 | * 2. send 8-bit start code | |
| 15 | * 3. send 16-bit data | |
| 16 | * 4. chip-select inactive | |
| 17 | */ | |
| 18 | static int send_word(struct s6e63d6 *data, u8 rs, u16 word) | |
| 19 | { | |
| 20 | /* | |
| 21 | * The start byte looks like (binary): | |
| 22 | * 01110<ID><RS><R/W> | |
| 23 | * RS is 0 for index or 1 for data, and R/W is 0 for write. | |
| 24 | */ | |
| 25 | u32 buf8 = 0x70 | data->id | (rs & 2); | |
| 26 | u32 buf16 = cpu_to_le16(word); | |
| 27 | u32 buf_in; | |
| 28 | int err; | |
| 29 | ||
| 30 | err = spi_xfer(data->slave, 8, &buf8, &buf_in, SPI_XFER_BEGIN); | |
| 31 | if (err) | |
| 32 | return err; | |
| 33 | ||
| 34 | return spi_xfer(data->slave, 16, &buf16, &buf_in, SPI_XFER_END); | |
| 35 | } | |
| 36 | ||
| 37 | /* Index and param differ in Register Select bit */ | |
| 38 | int s6e63d6_index(struct s6e63d6 *data, u8 idx) | |
| 39 | { | |
| 40 | return send_word(data, 0, idx); | |
| 41 | } | |
| 42 | ||
| 43 | int s6e63d6_param(struct s6e63d6 *data, u16 param) | |
| 44 | { | |
| 45 | return send_word(data, 2, param); | |
| 46 | } | |
| 47 | ||
| 48 | int s6e63d6_init(struct s6e63d6 *data) | |
| 49 | { | |
| 50 | if (data->id != 0 && data->id != 4) { | |
| 51 | printf("s6e63d6: invalid ID %u\n", data->id); | |
| 52 | return 1; | |
| 53 | } | |
| 54 | ||
| 55 | data->slave = spi_setup_slave(data->bus, data->cs, 100000, SPI_MODE_3); | |
| 56 | if (!data->slave) | |
| 57 | return 1; | |
| 58 | ||
| 59 | return 0; | |
| 60 | } |