projects / J-u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 83d290c5 | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| b5b06fb7 YS |
2 | /* |
| 3 | * Copyright 2011-2012 Freescale Semiconductor, Inc. | |
| b5b06fb7 YS |
4 | */ |
| 5 | ||
| 6 | #ifndef __CONFIG_H | |
| 7 | #define __CONFIG_H | |
| 8 | ||
| 9 | /* | |
| 10 | * B4860 QDS board configuration file | |
| 11 | */ | |
| b5b06fb7 | 12 | #ifdef CONFIG_RAMBOOT_PBL |
| c5dfe6ec PK |
13 | #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg |
| 14 | #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg | |
| 15 | #ifndef CONFIG_NAND | |
| b5b06fb7 YS |
16 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE |
| 17 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| c5dfe6ec | 18 | #else |
| c5dfe6ec | 19 | #define CONFIG_SPL_FLUSH_IMAGE |
| c5dfe6ec PK |
20 | #define CONFIG_SPL_PAD_TO 0x40000 |
| 21 | #define CONFIG_SPL_MAX_SIZE 0x28000 | |
| 22 | #define RESET_VECTOR_OFFSET 0x27FFC | |
| 23 | #define BOOT_PAGE_OFFSET 0x27000 | |
| c5dfe6ec PK |
24 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) |
| 25 | #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 | |
| 26 | #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 | |
| 27 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) | |
| 28 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
| 29 | #define CONFIG_SPL_NAND_BOOT | |
| 30 | #ifdef CONFIG_SPL_BUILD | |
| 31 | #define CONFIG_SPL_SKIP_RELOCATE | |
| 32 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 33 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE | |
| c5dfe6ec PK |
34 | #endif |
| 35 | #endif | |
| b5b06fb7 YS |
36 | #endif |
| 37 | ||
| 5870fe44 LG |
38 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| 39 | /* Set 1M boot space */ | |
| 40 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) | |
| 41 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ | |
| 42 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) | |
| 43 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| 5870fe44 LG |
44 | #endif |
| 45 | ||
| b5b06fb7 | 46 | /* High Level Configuration Options */ |
| b5b06fb7 | 47 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ |
| b5b06fb7 | 48 | |
| b5b06fb7 YS |
49 | #ifndef CONFIG_RESET_VECTOR_ADDRESS |
| 50 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 51 | #endif | |
| 52 | ||
| 53 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 51370d56 | 54 | #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS |
| b38eaec5 | 55 | #define CONFIG_PCIE1 /* PCIE controller 1 */ |
| b5b06fb7 YS |
56 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| 57 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 58 | ||
| b41f192b | 59 | #ifndef CONFIG_ARCH_B4420 |
| b5b06fb7 YS |
60 | #define CONFIG_SYS_SRIO |
| 61 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
| 62 | #define CONFIG_SRIO2 /* SRIO port 2 */ | |
| 3a01799b | 63 | #define CONFIG_SRIO_PCIE_BOOT_MASTER |
| b5b06fb7 YS |
64 | #endif |
| 65 | ||
| b5b06fb7 YS |
66 | /* I2C bus multiplexer */ |
| 67 | #define I2C_MUX_PCA_ADDR 0x77 | |
| 68 | ||
| 69 | /* VSC Crossbar switches */ | |
| 70 | #define CONFIG_VSC_CROSSBAR | |
| 71 | #define I2C_CH_DEFAULT 0x8 | |
| 72 | #define I2C_CH_VSC3316 0xc | |
| 73 | #define I2C_CH_VSC3308 0xd | |
| 74 | ||
| 75 | #define VSC3316_TX_ADDRESS 0x70 | |
| 76 | #define VSC3316_RX_ADDRESS 0x71 | |
| 77 | #define VSC3308_TX_ADDRESS 0x02 | |
| 78 | #define VSC3308_RX_ADDRESS 0x03 | |
| 79 | ||
| cb033741 SL |
80 | /* IDT clock synthesizers */ |
| 81 | #define CONFIG_IDT8T49N222A | |
| 82 | #define I2C_CH_IDT 0x9 | |
| 83 | ||
| 84 | #define IDT_SERDES1_ADDRESS 0x6E | |
| 85 | #define IDT_SERDES2_ADDRESS 0x6C | |
| 86 | ||
| 652e29b4 SL |
87 | /* Voltage monitor on channel 2*/ |
| 88 | #define I2C_MUX_CH_VOL_MONITOR 0xa | |
| 89 | #define I2C_VOL_MONITOR_ADDR 0x40 | |
| 90 | #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 | |
| 91 | #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 | |
| 92 | #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 | |
| 93 | ||
| 94 | #define CONFIG_ZM7300 | |
| 95 | #define I2C_MUX_CH_DPM 0xa | |
| 96 | #define I2C_DPM_ADDR 0x28 | |
| 97 | ||
| b5b06fb7 YS |
98 | #define CONFIG_ENV_OVERWRITE |
| 99 | ||
| b5b06fb7 | 100 | #if defined(CONFIG_SPIFLASH) |
| b5b06fb7 YS |
101 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ |
| 102 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 103 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 104 | #elif defined(CONFIG_SDCARD) | |
| b5b06fb7 YS |
105 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 106 | #define CONFIG_ENV_SIZE 0x2000 | |
| 107 | #define CONFIG_ENV_OFFSET (512 * 1097) | |
| 108 | #elif defined(CONFIG_NAND) | |
| c5dfe6ec PK |
109 | #define CONFIG_ENV_SIZE 0x2000 |
| 110 | #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 5870fe44 | 111 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 5870fe44 LG |
112 | #define CONFIG_ENV_ADDR 0xffe20000 |
| 113 | #define CONFIG_ENV_SIZE 0x2000 | |
| 114 | #elif defined(CONFIG_ENV_IS_NOWHERE) | |
| 115 | #define CONFIG_ENV_SIZE 0x2000 | |
| b5b06fb7 | 116 | #else |
| b5b06fb7 YS |
117 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| 118 | #define CONFIG_ENV_SIZE 0x2000 | |
| 119 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 120 | #endif | |
| b5b06fb7 YS |
121 | |
| 122 | #ifndef __ASSEMBLY__ | |
| 123 | unsigned long get_board_sys_clk(void); | |
| 124 | unsigned long get_board_ddr_clk(void); | |
| 125 | #endif | |
| 126 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ | |
| 127 | #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() | |
| 128 | ||
| 129 | /* | |
| 130 | * These can be toggled for performance analysis, otherwise use default. | |
| 131 | */ | |
| 132 | #define CONFIG_SYS_CACHE_STASHING | |
| 133 | #define CONFIG_BTB /* toggle branch predition */ | |
| 134 | #define CONFIG_DDR_ECC | |
| 135 | #ifdef CONFIG_DDR_ECC | |
| 136 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 137 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 138 | #endif | |
| 139 | ||
| 140 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 141 | ||
| 142 | #ifdef CONFIG_PHYS_64BIT | |
| 143 | #define CONFIG_ADDR_MAP | |
| 144 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 145 | #endif | |
| 146 | ||
| 147 | #if 0 | |
| 148 | #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ | |
| 149 | #endif | |
| 150 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 151 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| b5b06fb7 YS |
152 | |
| 153 | /* | |
| 154 | * Config the L3 Cache as L3 SRAM | |
| 155 | */ | |
| c5dfe6ec PK |
156 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
| 157 | #define CONFIG_SYS_L3_SIZE 256 << 10 | |
| 158 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) | |
| 159 | #ifdef CONFIG_NAND | |
| 160 | #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) | |
| 161 | #endif | |
| 162 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) | |
| 163 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) | |
| 164 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) | |
| b5b06fb7 YS |
165 | |
| 166 | #ifdef CONFIG_PHYS_64BIT | |
| 167 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 168 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 169 | #endif | |
| 170 | ||
| 171 | /* EEPROM */ | |
| 1de271b4 | 172 | #define CONFIG_ID_EEPROM |
| b5b06fb7 YS |
173 | #define CONFIG_SYS_I2C_EEPROM_NXID |
| 174 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 175 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 176 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 177 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 178 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 179 | ||
| 180 | /* | |
| 181 | * DDR Setup | |
| 182 | */ | |
| 183 | #define CONFIG_VERY_BIG_RAM | |
| 184 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 185 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 186 | ||
| b5b06fb7 YS |
187 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| 188 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 189 | ||
| 190 | #define CONFIG_DDR_SPD | |
| 191 | #define CONFIG_SYS_DDR_RAW_TIMING | |
| b5b06fb7 YS |
192 | |
| 193 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 194 | #define SPD_EEPROM_ADDRESS1 0x51 | |
| 195 | #define SPD_EEPROM_ADDRESS2 0x53 | |
| 196 | ||
| 197 | #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 | |
| 198 | #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ | |
| 199 | ||
| 200 | /* | |
| 201 | * IFC Definitions | |
| 202 | */ | |
| 203 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 204 | #ifdef CONFIG_PHYS_64BIT | |
| 205 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 206 | #else | |
| 207 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 208 | #endif | |
| 209 | ||
| 210 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
| 211 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 212 | + 0x8000000) | \ | |
| 213 | CSPR_PORT_SIZE_16 | \ | |
| 214 | CSPR_MSEL_NOR | \ | |
| 215 | CSPR_V) | |
| 216 | #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) | |
| 217 | #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 218 | CSPR_PORT_SIZE_16 | \ | |
| 219 | CSPR_MSEL_NOR | \ | |
| 220 | CSPR_V) | |
| 221 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) | |
| 222 | /* NOR Flash Timing Params */ | |
| 223 | #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) | |
| 224 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \ | |
| 4d0e6e0d | 225 | FTIM0_NOR_TEADC(0x04) | \ |
| b5b06fb7 YS |
226 | FTIM0_NOR_TEAHC(0x20)) |
| 227 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 228 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
| 229 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 230 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \ | |
| 231 | FTIM2_NOR_TCH(0x0E) | \ | |
| 232 | FTIM2_NOR_TWPH(0x0E) | \ | |
| 233 | FTIM2_NOR_TWP(0x1c)) | |
| 234 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 235 | ||
| 236 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 237 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 238 | ||
| 239 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 240 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 241 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 242 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 243 | ||
| 244 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 245 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 246 | + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} | |
| 247 | ||
| 248 | #define CONFIG_FSL_QIXIS /* use common QIXIS code */ | |
| 249 | #define CONFIG_FSL_QIXIS_V2 | |
| 250 | #define QIXIS_BASE 0xffdf0000 | |
| 251 | #ifdef CONFIG_PHYS_64BIT | |
| 252 | #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) | |
| 253 | #else | |
| 254 | #define QIXIS_BASE_PHYS QIXIS_BASE | |
| 255 | #endif | |
| 256 | #define QIXIS_LBMAP_SWITCH 0x01 | |
| 257 | #define QIXIS_LBMAP_MASK 0x0f | |
| 258 | #define QIXIS_LBMAP_SHIFT 0 | |
| 259 | #define QIXIS_LBMAP_DFLTBANK 0x00 | |
| 260 | #define QIXIS_LBMAP_ALTBANK 0x02 | |
| 261 | #define QIXIS_RST_CTL_RESET 0x31 | |
| 262 | #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 | |
| 263 | #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 | |
| 264 | #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 | |
| 265 | ||
| 266 | #define CONFIG_SYS_CSPR3_EXT (0xf) | |
| 267 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | |
| 268 | | CSPR_PORT_SIZE_8 \ | |
| 269 | | CSPR_MSEL_GPCM \ | |
| 270 | | CSPR_V) | |
| 088d52cf | 271 | #define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) |
| b5b06fb7 YS |
272 | #define CONFIG_SYS_CSOR3 0x0 |
| 273 | /* QIXIS Timing parameters for IFC CS3 */ | |
| 274 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 275 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 276 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 277 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
| 278 | FTIM1_GPCM_TRAD(0x1f)) | |
| 279 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| de519163 | 280 | FTIM2_GPCM_TCH(0x8) | \ |
| b5b06fb7 YS |
281 | FTIM2_GPCM_TWP(0x1f)) |
| 282 | #define CONFIG_SYS_CS3_FTIM3 0x0 | |
| 283 | ||
| 284 | /* NAND Flash on IFC */ | |
| 285 | #define CONFIG_NAND_FSL_IFC | |
| ab13ad58 YS |
286 | #define CONFIG_SYS_NAND_MAX_ECCPOS 256 |
| 287 | #define CONFIG_SYS_NAND_MAX_OOBFREE 2 | |
| b5b06fb7 YS |
288 | #define CONFIG_SYS_NAND_BASE 0xff800000 |
| 289 | #ifdef CONFIG_PHYS_64BIT | |
| 290 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
| 291 | #else | |
| 292 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 293 | #endif | |
| 294 | ||
| 295 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
| 296 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 297 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 298 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 299 | | CSPR_V) | |
| 300 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) | |
| 301 | ||
| 302 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 303 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 304 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 305 | | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ | |
| 306 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | |
| 307 | | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ | |
| 308 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
| 309 | ||
| 310 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 311 | ||
| 312 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 313 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
| 314 | FTIM0_NAND_TWP(0x18) | \ | |
| 315 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 316 | FTIM0_NAND_TWH(0x0a)) | |
| 317 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 318 | FTIM1_NAND_TWBE(0x39) | \ | |
| 319 | FTIM1_NAND_TRR(0x0e) | \ | |
| 320 | FTIM1_NAND_TRP(0x18)) | |
| 321 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 322 | FTIM2_NAND_TREH(0x0a) | \ | |
| 323 | FTIM2_NAND_TWHRE(0x1e)) | |
| 324 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 325 | ||
| 326 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 327 | ||
| 328 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 329 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| b5b06fb7 YS |
330 | |
| 331 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 332 | ||
| 333 | #if defined(CONFIG_NAND) | |
| 334 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 335 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 336 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 337 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 338 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 339 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 340 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 341 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 342 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 343 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR | |
| 344 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 345 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 346 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 347 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 348 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 349 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 350 | #else | |
| 351 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 352 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
| 353 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 354 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 355 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 356 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 357 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 358 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 359 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 360 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR | |
| 361 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK | |
| 362 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR | |
| 363 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 364 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 365 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 366 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 367 | #endif | |
| 368 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 369 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR | |
| 370 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 371 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 372 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 373 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 374 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 375 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 376 | ||
| c5dfe6ec PK |
377 | #ifdef CONFIG_SPL_BUILD |
| 378 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 379 | #else | |
| 380 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
| 381 | #endif | |
| b5b06fb7 YS |
382 | |
| 383 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 384 | #define CONFIG_SYS_RAMBOOT | |
| 385 | #endif | |
| 386 | ||
| b5b06fb7 YS |
387 | #define CONFIG_HWCONFIG |
| 388 | ||
| 389 | /* define to use L1 as initial stack */ | |
| 390 | #define CONFIG_L1_INIT_RAM | |
| 391 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 392 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
| 393 | #ifdef CONFIG_PHYS_64BIT | |
| 394 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| b3142e2c | 395 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 |
| b5b06fb7 YS |
396 | /* The assembler doesn't like typecast */ |
| 397 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 398 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 399 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 400 | #else | |
| b3142e2c | 401 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ |
| b5b06fb7 YS |
402 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 |
| 403 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 404 | #endif | |
| 405 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 406 | ||
| 407 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 408 | GENERATED_GBL_DATA_SIZE) | |
| 409 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 410 | ||
| 9307cbab | 411 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| b5b06fb7 YS |
412 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
| 413 | ||
| 414 | /* Serial Port - controlled on board with jumper J8 | |
| 415 | * open - index 2 | |
| 416 | * shorted - index 1 | |
| 417 | */ | |
| b5b06fb7 YS |
418 | #define CONFIG_SYS_NS16550_SERIAL |
| 419 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 420 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 421 | ||
| 422 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 423 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 424 | ||
| 425 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 426 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 427 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 428 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| b5b06fb7 | 429 | |
| b5b06fb7 | 430 | /* I2C */ |
| 00f792e0 HS |
431 | #define CONFIG_SYS_I2C |
| 432 | #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ | |
| 433 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ | |
| 434 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 435 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ | |
| 436 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 437 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
| 438 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 | |
| b5b06fb7 YS |
439 | |
| 440 | /* | |
| 441 | * RTC configuration | |
| 442 | */ | |
| 443 | #define RTC | |
| 444 | #define CONFIG_RTC_DS3231 1 | |
| 445 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 | |
| 446 | ||
| 447 | /* | |
| 448 | * RapidIO | |
| 449 | */ | |
| 450 | #ifdef CONFIG_SYS_SRIO | |
| 451 | #ifdef CONFIG_SRIO1 | |
| 452 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
| 453 | #ifdef CONFIG_PHYS_64BIT | |
| 454 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
| 455 | #else | |
| 456 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 | |
| 457 | #endif | |
| 458 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ | |
| 459 | #endif | |
| 460 | ||
| 461 | #ifdef CONFIG_SRIO2 | |
| 462 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
| 463 | #ifdef CONFIG_PHYS_64BIT | |
| 464 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull | |
| 465 | #else | |
| 466 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 | |
| 467 | #endif | |
| 468 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ | |
| 469 | #endif | |
| 470 | #endif | |
| 471 | ||
| 472 | /* | |
| 473 | * for slave u-boot IMAGE instored in master memory space, | |
| 474 | * PHYS must be aligned based on the SIZE | |
| 475 | */ | |
| e4911815 LG |
476 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull |
| 477 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull | |
| 478 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ | |
| 479 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull | |
| b5b06fb7 YS |
480 | /* |
| 481 | * for slave UCODE and ENV instored in master memory space, | |
| 482 | * PHYS must be aligned based on the SIZE | |
| 483 | */ | |
| e4911815 | 484 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull |
| b5b06fb7 YS |
485 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull |
| 486 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ | |
| 487 | ||
| 488 | /* slave core release by master*/ | |
| 489 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 | |
| 490 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ | |
| 491 | ||
| 492 | /* | |
| 493 | * SRIO_PCIE_BOOT - SLAVE | |
| 494 | */ | |
| 495 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE | |
| 496 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 | |
| 497 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ | |
| 498 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) | |
| 499 | #endif | |
| 500 | ||
| 501 | /* | |
| 502 | * eSPI - Enhanced SPI | |
| 503 | */ | |
| b5b06fb7 | 504 | |
| 6eaeba23 SL |
505 | /* |
| 506 | * MAPLE | |
| 507 | */ | |
| 508 | #ifdef CONFIG_PHYS_64BIT | |
| 509 | #define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull | |
| 510 | #else | |
| 511 | #define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000 | |
| 512 | #endif | |
| 513 | ||
| b5b06fb7 YS |
514 | /* |
| 515 | * General PCI | |
| 516 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 517 | */ | |
| 518 | ||
| 519 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 520 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 521 | #ifdef CONFIG_PHYS_64BIT | |
| 522 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 523 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 524 | #else | |
| 525 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 526 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 527 | #endif | |
| 528 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 529 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 530 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 531 | #ifdef CONFIG_PHYS_64BIT | |
| 532 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 533 | #else | |
| 534 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 | |
| 535 | #endif | |
| 536 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 537 | ||
| 538 | /* Qman/Bman */ | |
| 539 | #ifndef CONFIG_NOBQFMAN | |
| b5b06fb7 YS |
540 | #define CONFIG_SYS_BMAN_NUM_PORTALS 25 |
| 541 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 542 | #ifdef CONFIG_PHYS_64BIT | |
| 543 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 544 | #else | |
| 545 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE | |
| 546 | #endif | |
| 547 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
548 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 549 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
| 550 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
| 551 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 552 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
| 553 | CONFIG_SYS_BMAN_CENA_SIZE) | |
| 554 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 555 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
| b5b06fb7 YS |
556 | #define CONFIG_SYS_QMAN_NUM_PORTALS 25 |
| 557 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
| 558 | #ifdef CONFIG_PHYS_64BIT | |
| 559 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
| 560 | #else | |
| 561 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE | |
| 562 | #endif | |
| 563 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
564 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 565 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
| 566 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
| 567 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 568 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
| 569 | CONFIG_SYS_QMAN_CENA_SIZE) | |
| 570 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 571 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
| b5b06fb7 YS |
572 | |
| 573 | #define CONFIG_SYS_DPAA_FMAN | |
| 574 | ||
| 0795eff3 ML |
575 | #define CONFIG_SYS_DPAA_RMAN |
| 576 | ||
| b5b06fb7 YS |
577 | /* Default address of microcode for the Linux Fman driver */ |
| 578 | #if defined(CONFIG_SPIFLASH) | |
| 579 | /* | |
| 580 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 581 | * env, so we got 0x110000. | |
| 582 | */ | |
| 583 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
| dcf1d774 | 584 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 |
| b5b06fb7 YS |
585 | #elif defined(CONFIG_SDCARD) |
| 586 | /* | |
| 587 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| 588 | * about 545KB (1089 blocks), Env is stored after the image, and the env size is | |
| 589 | * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. | |
| 590 | */ | |
| 591 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
| dcf1d774 | 592 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130) |
| b5b06fb7 YS |
593 | #elif defined(CONFIG_NAND) |
| 594 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
| c5dfe6ec | 595 | #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 5870fe44 LG |
596 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 597 | /* | |
| 598 | * Slave has no ucode locally, it can fetch this from remote. When implementing | |
| 599 | * in two corenet boards, slave's ucode could be stored in master's memory | |
| 600 | * space, the address can be mapped from slave TLB->slave LAW-> | |
| 601 | * slave SRIO or PCIE outbound window->master inbound window-> | |
| 602 | * master LAW->the ucode address in master's memory space. | |
| 603 | */ | |
| 604 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE | |
| dcf1d774 | 605 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 |
| b5b06fb7 YS |
606 | #else |
| 607 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
| dcf1d774 | 608 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 |
| b5b06fb7 YS |
609 | #endif |
| 610 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
| 611 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 612 | #endif /* CONFIG_NOBQFMAN */ | |
| 613 | ||
| 614 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 615 | #define CONFIG_FMAN_ENET | |
| 616 | #define CONFIG_PHYLIB_10G | |
| 617 | #define CONFIG_PHY_VITESSE | |
| 618 | #define CONFIG_PHY_TERANETICS | |
| 619 | #define SGMII_CARD_PORT1_PHY_ADDR 0x1C | |
| 620 | #define SGMII_CARD_PORT2_PHY_ADDR 0x10 | |
| 621 | #define SGMII_CARD_PORT3_PHY_ADDR 0x1E | |
| 622 | #define SGMII_CARD_PORT4_PHY_ADDR 0x11 | |
| 623 | #endif | |
| 624 | ||
| 625 | #ifdef CONFIG_PCI | |
| 842033e6 | 626 | #define CONFIG_PCI_INDIRECT_BRIDGE |
| b5b06fb7 YS |
627 | |
| 628 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| b5b06fb7 YS |
629 | #endif /* CONFIG_PCI */ |
| 630 | ||
| 631 | #ifdef CONFIG_FMAN_ENET | |
| f1d8074c SL |
632 | #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10 |
| 633 | #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11 | |
| 16d88f41 SG |
634 | |
| 635 | /*B4860 QDS AMC2PEX-2S default PHY_ADDR */ | |
| 636 | #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ | |
| 637 | #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ | |
| 638 | ||
| b5b06fb7 YS |
639 | #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c |
| 640 | #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d | |
| 641 | #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e | |
| 642 | #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f | |
| 643 | ||
| b5b06fb7 | 644 | #define CONFIG_ETHPRIME "FM1@DTSEC1" |
| b5b06fb7 YS |
645 | #endif |
| 646 | ||
| b24f6d40 SX |
647 | #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR |
| 648 | ||
| b5b06fb7 YS |
649 | /* |
| 650 | * Environment | |
| 651 | */ | |
| 652 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 653 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 654 | ||
| b5b06fb7 YS |
655 | /* |
| 656 | * USB | |
| 657 | */ | |
| 658 | #define CONFIG_HAS_FSL_DR_USB | |
| 659 | ||
| 660 | #ifdef CONFIG_HAS_FSL_DR_USB | |
| 8850c5d5 | 661 | #ifdef CONFIG_USB_EHCI_HCD |
| b5b06fb7 YS |
662 | #define CONFIG_USB_EHCI_FSL |
| 663 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| b5b06fb7 YS |
664 | #endif |
| 665 | #endif | |
| 666 | ||
| 667 | /* | |
| 668 | * Miscellaneous configurable options | |
| 669 | */ | |
| b5b06fb7 | 670 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| b5b06fb7 YS |
671 | |
| 672 | /* | |
| 673 | * For booting Linux, the board info and command line data | |
| 674 | * have to be in the first 64 MB of memory, since this is | |
| 675 | * the maximum mapped by the Linux kernel during initialization. | |
| 676 | */ | |
| 677 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
| 678 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 679 | ||
| 680 | #ifdef CONFIG_CMD_KGDB | |
| 681 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| b5b06fb7 YS |
682 | #endif |
| 683 | ||
| 684 | /* | |
| 685 | * Environment Configuration | |
| 686 | */ | |
| 687 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 688 | #define CONFIG_BOOTFILE "uImage" | |
| 689 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ | |
| 690 | ||
| 691 | /* default location for tftp and bootm */ | |
| 692 | #define CONFIG_LOADADDR 1000000 | |
| 693 | ||
| b5b06fb7 YS |
694 | #define __USB_PHY_TYPE ulpi |
| 695 | ||
| 3006ebc3 | 696 | #ifdef CONFIG_ARCH_B4860 |
| 38e0e153 SL |
697 | #define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \ |
| 698 | "bank_intlv=cs0_cs1;" \ | |
| 699 | "en_cpc:cpc2;" | |
| 700 | #else | |
| 701 | #define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;" | |
| 702 | #endif | |
| 703 | ||
| b5b06fb7 | 704 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 38e0e153 | 705 | HWCONFIG \ |
| b5b06fb7 YS |
706 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ |
| 707 | "netdev=eth0\0" \ | |
| 708 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 709 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 710 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 711 | "protect off $ubootaddr +$filesize && " \ | |
| 712 | "erase $ubootaddr +$filesize && " \ | |
| 713 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 714 | "protect on $ubootaddr +$filesize && " \ | |
| 715 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 716 | "consoledev=ttyS0\0" \ | |
| 717 | "ramdiskaddr=2000000\0" \ | |
| 718 | "ramdiskfile=b4860qds/ramdisk.uboot\0" \ | |
| b24a4f62 | 719 | "fdtaddr=1e00000\0" \ |
| b5b06fb7 | 720 | "fdtfile=b4860qds/b4860qds.dtb\0" \ |
| 3246584d | 721 | "bdev=sda3\0" |
| b5b06fb7 YS |
722 | |
| 723 | /* For emulation this causes u-boot to jump to the start of the proof point | |
| 724 | app code automatically */ | |
| 725 | #define CONFIG_PROOF_POINTS \ | |
| 726 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 727 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 728 | "cpu 1 release 0x29000000 - - -;" \ | |
| 729 | "cpu 2 release 0x29000000 - - -;" \ | |
| 730 | "cpu 3 release 0x29000000 - - -;" \ | |
| 731 | "cpu 4 release 0x29000000 - - -;" \ | |
| 732 | "cpu 5 release 0x29000000 - - -;" \ | |
| 733 | "cpu 6 release 0x29000000 - - -;" \ | |
| 734 | "cpu 7 release 0x29000000 - - -;" \ | |
| 735 | "go 0x29000000" | |
| 736 | ||
| 737 | #define CONFIG_HVBOOT \ | |
| 738 | "setenv bootargs config-addr=0x60000000; " \ | |
| 739 | "bootm 0x01000000 - 0x00f00000" | |
| 740 | ||
| 741 | #define CONFIG_ALU \ | |
| 742 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 743 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 744 | "cpu 1 release 0x01000000 - - -;" \ | |
| 745 | "cpu 2 release 0x01000000 - - -;" \ | |
| 746 | "cpu 3 release 0x01000000 - - -;" \ | |
| 747 | "cpu 4 release 0x01000000 - - -;" \ | |
| 748 | "cpu 5 release 0x01000000 - - -;" \ | |
| 749 | "cpu 6 release 0x01000000 - - -;" \ | |
| 750 | "cpu 7 release 0x01000000 - - -;" \ | |
| 751 | "go 0x01000000" | |
| 752 | ||
| 753 | #define CONFIG_LINUX \ | |
| 754 | "setenv bootargs root=/dev/ram rw " \ | |
| 755 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 756 | "setenv ramdiskaddr 0x02000000;" \ | |
| b24a4f62 | 757 | "setenv fdtaddr 0x01e00000;" \ |
| b5b06fb7 YS |
758 | "setenv loadaddr 0x1000000;" \ |
| 759 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 760 | ||
| 761 | #define CONFIG_HDBOOT \ | |
| 762 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 763 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 764 | "tftp $loadaddr $bootfile;" \ | |
| 765 | "tftp $fdtaddr $fdtfile;" \ | |
| 766 | "bootm $loadaddr - $fdtaddr" | |
| 767 | ||
| 768 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 769 | "setenv bootargs root=/dev/nfs rw " \ | |
| 770 | "nfsroot=$serverip:$rootpath " \ | |
| 771 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 772 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 773 | "tftp $loadaddr $bootfile;" \ | |
| 774 | "tftp $fdtaddr $fdtfile;" \ | |
| 775 | "bootm $loadaddr - $fdtaddr" | |
| 776 | ||
| 777 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 778 | "setenv bootargs root=/dev/ram rw " \ | |
| 779 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 780 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 781 | "tftp $loadaddr $bootfile;" \ | |
| 782 | "tftp $fdtaddr $fdtfile;" \ | |
| 783 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 784 | ||
| 785 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
| 786 | ||
| b5b06fb7 | 787 | #include <asm/fsl_secure_boot.h> |
| b5b06fb7 YS |
788 | |
| 789 | #endif /* __CONFIG_H */ |