]> Git Repo - J-u-boot.git/blame - include/configs/plutux.h
ARM: add Raspberry Pi model B board, using BCM2835 SoC
[J-u-boot.git] / include / configs / plutux.h
CommitLineData
4026aca6
TR
1/*
2 * (C) Copyright 2010,2011
3 * NVIDIA Corporation <www.nvidia.com>
a7dafd7b 4 * (C) Copyright 2011-2012
4026aca6
TR
5 * Avionic Design GmbH <www.avionic-design.de>
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#ifndef __CONFIG_H
27#define __CONFIG_H
28
29#include "tegra2-common.h"
30
a7dafd7b
TR
31/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */
32#define CONFIG_DEFAULT_DEVICE_TREE tegra2-plutux
33#define CONFIG_OF_CONTROL
34#define CONFIG_OF_SEPARATE
35
4026aca6 36/* High-level configuration options */
4026aca6
TR
37#define V_PROMPT "Tegra2 (Plutux) # "
38#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Plutux"
4026aca6
TR
39
40/* Board-specific serial config */
41#define CONFIG_SERIAL_MULTI
42#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */
43#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
44
45#define CONFIG_BOARD_EARLY_INIT_F
46
a783bdb8
SG
47#define CONFIG_ENV_IS_NOWHERE
48
4026aca6
TR
49/* SD/MMC */
50#define CONFIG_MMC
51#define CONFIG_GENERIC_MMC
3f82d89d 52#define CONFIG_TEGRA_MMC
4026aca6
TR
53#define CONFIG_CMD_MMC
54
a7dafd7b
TR
55/* USB host support */
56#define CONFIG_USB_EHCI
57#define CONFIG_USB_EHCI_TEGRA
58#define CONFIG_USB_STORAGE
59#define CONFIG_CMD_USB
60
61/* USB networking support */
62#define CONFIG_USB_HOST_ETHER
63#define CONFIG_USB_ETHER_SMSC95XX
64
65/* General networking support */
66#define CONFIG_CMD_NET
67#define CONFIG_CMD_DHCP
68
4026aca6
TR
69#define CONFIG_DOS_PARTITION
70#define CONFIG_EFI_PARTITION
71#define CONFIG_CMD_EXT2
72#define CONFIG_CMD_FAT
73
74#define CONFIG_FIT
75
76#define CONFIG_BOOTCOMMAND \
77 "mmc rescan;" \
78 "ext2load mmc 0 0x17000000 /boot/uImage;" \
79 "bootm"
80
bea2674c
SW
81#include "tegra2-common-post.h"
82
4026aca6 83#endif /* __CONFIG_H */
This page took 0.114518 seconds and 4 git commands to generate.