[J-u-boot.git] / include / configs / gplugd.h

/*
 * (C) Copyright 2011
 * eInfochips Ltd. <www.einfochips.com>
 * Written-by: Ajay Bhargav <[email protected]>
 *
 * Based on Aspenite:
 * (C) Copyright 2010
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <[email protected]>
 * Contributor: Mahavir Jain <[email protected]>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301 USA
 */

#ifndef __CONFIG_GPLUGD_H
#define __CONFIG_GPLUGD_H

/*
 * Version number information
 */
#define CONFIG_IDENT_STRING	"\nMarvell-gplugD"

/*
 * High Level Configuration Options
 */
#define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
#define CONFIG_ARMADA100		1	/* SOC Family Name */
#define CONFIG_ARMADA168		1	/* SOC Used on this Board */
#define CONFIG_MACH_SHEEVAD			/* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

#define	CONFIG_SYS_TEXT_BASE	0x00f00000

/*
 * There is no internal RAM in ARMADA100, using DRAM
 * TBD: dcache to be used for this
 */
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - 0x00200000)
#define CONFIG_NR_DRAM_BANKS_MAX	2

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
#define CONFIG_CMD_I2C
#define CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA

/* Disable DCACHE */
#define CONFIG_SYS_DCACHE_OFF

/* Network configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_ARMADA100_FEC

/* DHCP Support */
#define CONFIG_CMD_DHCP
#define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
#endif /* CONFIG_CMD_NET */

/* GPIO Support */
#define CONFIG_MARVELL_GPIO

/* PHY configuration */
#define CONFIG_MII
#define CONFIG_CMD_MII
#define CONFIG_RESET_PHY_R
/* 88E3015 register definition */
#define PHY_LED_PAR_SEL_REG		22
#define PHY_LED_MAN_REG			25
#define PHY_LED_VAL			0x5b	/* LINK LED1, ACT LED2 */
/* GPIO Configuration for PHY */
#define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */

/* SPI Support */
#define CONFIG_ARMADA100_SPI
#define CONFIG_ENV_SPI_CS		110
#define CONFIG_SYS_SSP_PORT		2

/* Flash Support */
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_ATMEL

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"
#undef CONFIG_ARCH_MISC_INIT

#ifdef CONFIG_SYS_NS16550_COM1
#undef CONFIG_SYS_NS16550_COM1
#endif /* CONFIG_SYS_NS16550_COM1 */

#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE

/*
 * Environment variables configurations
 */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE		0x4000
#define CONFIG_ENV_SIZE			0x4000
#define CONFIG_ENV_OFFSET		0x07C000

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_EDITENV
#define CONFIG_CMD_SAVEENV

#endif	/* __CONFIG_GPLUGD_H */
Commit	Line	Data
26749582 AB	1	/*
	2	* (C) Copyright 2011
	3	* eInfochips Ltd. <www.einfochips.com>
	4	* Written-by: Ajay Bhargav <[email protected]>
	5	*
	6	* Based on Aspenite:
	7	* (C) Copyright 2010
	8	* Marvell Semiconductor <www.marvell.com>
	9	* Written-by: Prafulla Wadaskar <[email protected]>
	10	* Contributor: Mahavir Jain <[email protected]>
	11	*
	12	* See file CREDITS for list of people who contributed to this
	13	* project.
	14	*
	15	* This program is free software; you can redistribute it and/or
	16	* modify it under the terms of the GNU General Public License as
	17	* published by the Free Software Foundation; either version 2 of
	18	* the License, or (at your option) any later version.
	19	*
	20	* This program is distributed in the hope that it will be useful,
	21	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	22	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	23	* GNU General Public License for more details.
	24	*
	25	* You should have received a copy of the GNU General Public License
	26	* along with this program; if not, write to the Free Software
	27	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	28	* MA 02110-1301 USA
	29	*/
	30
	31	#ifndef __CONFIG_GPLUGD_H
	32	#define __CONFIG_GPLUGD_H
	33
	34	/*
	35	* Version number information
	36	*/
	37	#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
	38
	39	/*
	40	* High Level Configuration Options
	41	*/
	42	#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
	43	#define CONFIG_ARMADA100 1 /* SOC Family Name */
	44	#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
	45	#define CONFIG_MACH_SHEEVAD /* Machine type */
	46	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	47
	48	#define CONFIG_SYS_TEXT_BASE 0x00f00000
	49
	50	/*
	51	* There is no internal RAM in ARMADA100, using DRAM
	52	* TBD: dcache to be used for this
	53	*/
	54	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
	55	#define CONFIG_NR_DRAM_BANKS_MAX 2
	56
	57	/*
	58	* Commands configuration
	59	*/
	60	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	61	#include <config_cmd_default.h>
	62	#define CONFIG_CMD_I2C
	63	#define CONFIG_CMD_AUTOSCRIPT
	64	#undef CONFIG_CMD_FPGA
aa0ecfeb AB	65
	66	/* Disable DCACHE */
	67	#define CONFIG_SYS_DCACHE_OFF
	68
	69	/* Network configuration */
	70	#ifdef CONFIG_CMD_NET
	71	#define CONFIG_CMD_PING
aa0ecfeb AB	72	#define CONFIG_ARMADA100_FEC
	73
	74	/* DHCP Support */
	75	#define CONFIG_CMD_DHCP
	76	#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
	77	#endif /* CONFIG_CMD_NET */
26749582	78
47e75d72 AB	79	/* GPIO Support */
	80	#define CONFIG_MARVELL_GPIO
	81
	82	/* PHY configuration */
	83	#define CONFIG_MII
	84	#define CONFIG_CMD_MII
	85	#define CONFIG_RESET_PHY_R
	86	/* 88E3015 register definition */
	87	#define PHY_LED_PAR_SEL_REG 22
	88	#define PHY_LED_MAN_REG 25
	89	#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
	90	/* GPIO Configuration for PHY */
	91	#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
	92
daa4b2f7 AB	93	/* SPI Support */
	94	#define CONFIG_ARMADA100_SPI
	95	#define CONFIG_ENV_SPI_CS 110
	96	#define CONFIG_SYS_SSP_PORT 2
	97
2f83cd57 AB	98	/* Flash Support */
	99	#define CONFIG_CMD_SF
	100	#define CONFIG_SPI_FLASH_ATMEL
	101
26749582 AB	102	/*
	103	* mv-common.h should be defined after CMD configs since it used them
	104	* to enable certain macros
	105	*/
	106	#include "mv-common.h"
	107	#undef CONFIG_ARCH_MISC_INIT
	108
	109	#ifdef CONFIG_SYS_NS16550_COM1
	110	#undef CONFIG_SYS_NS16550_COM1
	111	#endif /* CONFIG_SYS_NS16550_COM1 */
	112
	113	#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
	114
	115	/*
	116	* Environment variables configurations
	117	*/
b5de038f AB	118	#define CONFIG_ENV_IS_IN_SPI_FLASH
	119	#define CONFIG_ENV_SECT_SIZE 0x4000
	120	#define CONFIG_ENV_SIZE 0x4000
	121	#define CONFIG_ENV_OFFSET 0x07C000
	122
	123	#define CONFIG_CMD_ASKENV
	124	#define CONFIG_CMD_EDITENV
	125	#define CONFIG_CMD_SAVEENV
26749582 AB	126
26749582 AB	127	#endif /* __CONFIG_GPLUGD_H */