projects / J-u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 466f0137 HS |
1 | The common CFI driver provides this weak default implementation for |
| 2 | flash_cmd_reset(): | |
| 3 | ||
| 66723eda | 4 | static void __flash_cmd_reset(flash_info_t *info) |
| 466f0137 HS |
5 | { |
| 6 | /* | |
| 7 | * We do not yet know what kind of commandset to use, so we issue | |
| 8 | * the reset command in both Intel and AMD variants, in the hope | |
| 9 | * that AMD flash roms ignore the Intel command. | |
| 10 | */ | |
| 11 | flash_write_cmd(info, 0, 0, AMD_CMD_RESET); | |
| 66723eda | 12 | udelay(1); |
| 466f0137 HS |
13 | flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); |
| 14 | } | |
| 15 | void flash_cmd_reset(flash_info_t *info) | |
| 16 | __attribute__((weak,alias("__flash_cmd_reset"))); | |
| 17 | ||
| 66723eda RD |
18 | Some flash chips seem to have trouble with this reset sequence. |
| 19 | In this case, board-specific code can override this weak default | |
| 20 | version with a board-specific function. | |
| 466f0137 | 21 | |
| 66723eda RD |
22 | At the time of writing, there are two boards that define their own |
| 23 | routine for this. | |
| 24 | ||
| 25 | First, the digsy_mtc board equipped with the M29W128GH from Numonyx | |
| 26 | needs this version to function properly: | |
| 466f0137 HS |
27 | |
| 28 | void flash_cmd_reset(flash_info_t *info) | |
| 29 | { | |
| 30 | flash_write_cmd(info, 0, 0, AMD_CMD_RESET); | |
| 31 | } | |
| 32 | ||
| 66723eda RD |
33 | In addition, the t3corp board defines the routine thusly: |
| 34 | ||
| 35 | void flash_cmd_reset(flash_info_t *info) | |
| 36 | { | |
| 37 | /* | |
| 38 | * FLASH at address CONFIG_SYS_FLASH_BASE is a Spansion chip and | |
| 39 | * needs the Spansion type reset commands. The other flash chip | |
| 40 | * is located behind a FPGA (Xilinx DS617) and needs the Intel type | |
| 41 | * reset command. | |
| 42 | */ | |
| 43 | if (info->start[0] == CONFIG_SYS_FLASH_BASE) | |
| 44 | flash_write_cmd(info, 0, 0, AMD_CMD_RESET); | |
| 45 | else | |
| 46 | flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); | |
| 47 | } | |
| 48 | ||
| 466f0137 HS |
49 | see also: |
| 50 | http://www.mail-archive.com/[email protected]/msg24368.html | |
| 3df3bc1e | 51 | |
| 52 | ||
| 53 | Config Option | |
| 54 | ||
| 55 | CONFIG_SYS_MAX_FLASH_SECT: Number of sectors available on Flash device | |
| 56 | ||
| 57 | CONFIG_SYS_FLASH_CFI_WIDTH: Data-width of the flash device | |
| 58 | ||
| 59 | CONFIG_CMD_FLASH: Enables Flash command library | |
| 60 | ||
| 61 | CONFIG_FLASH_CFI_DRIVER: Enables CFI Flash driver | |
| 62 | ||
| 63 | CONFIG_FLASH_CFI_MTD: Enables MTD frame work for NOR Flash devices |