[J-u-boot.git] / include / configs / DU440.h

/*
 * (C) Copyright 2008
 * Matthias Fuchs, esd gmbh, [email protected]
 *
 * based on the Sequoia board configuration by
 * Stefan Roese, Jacqueline Pira-Ferriol and Alain Saurel
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 **********************************************************************
 * DU440.h - configuration for esd's DU440 board (Power PC440EPx)
 **********************************************************************
 */
#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_DU440		1		/* Board is esd DU440	*/
#define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
#define CONFIG_4xx		1		/* ... PPC4xx family	*/
#define CONFIG_SYS_CLK_FREQ	33333400	/* external freq to pll	*/

#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
#define CONFIG_LAST_STAGE_INIT  1               /* last_stage_init      */

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN		(8 << 20)	/* Reserve 8 MB for malloc()  */

#define CFG_BOOT_BASE_ADDR	0xf0000000
#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH	*/
#define CFG_MONITOR_BASE	TEXT_BASE
#define CFG_NAND0_ADDR		0xd0000000      /* NAND Flash		*/
#define CFG_NAND1_ADDR		0xd0100000      /* NAND Flash		*/
#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
#define CFG_PCI_IOBASE          0xe8000000


/* Don't change either of these */
#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/

#define CFG_USB2D0_BASE		0xe0000100
#define CFG_USB_DEVICE		0xe0000000
#define CFG_USB_HOST		0xe0000400

/*
 * Initial RAM & stack pointer
 */
/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
#define CFG_INIT_RAM_OCM	1		/* OCM as init ram	*/
#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/

#define CFG_INIT_RAM_END	(4 << 10)
#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*
 * Serial Port
 */
/* TODO: external clock oscillator will be removed */
#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
#define CONFIG_BAUDRATE		115200
#define CONFIG_SERIAL_MULTI     1
#undef CONFIG_UART1_CONSOLE

#define CFG_BAUDRATE_TABLE						\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

/*
 * Video Port
 */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_SMI_LYNXEM
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_BMP_GZIP              /* gzip compressed bmp images */
#define CFG_VIDEO_LOGO_MAX_SIZE (4 << 20)  /* for decompressed img */
#define CFG_DEFAULT_VIDEO_MODE 0x31a       /* 1280x1024,16bpp */
#define CFG_CONSOLE_IS_IN_ENV
#define CFG_ISA_IO CFG_PCI_IOBASE

/*
 * Environment
 */
#define CFG_ENV_IS_IN_EEPROM    1	/* use FLASH for environment vars */

/*
 * FLASH related
 */
#define CFG_FLASH_CFI			/* The flash is CFI compatible */
#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver       */

#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }

#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	      */
#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip  */

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */

#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
/* CFI_FLASH_PROTECTION make flash_protect hang sometimes -> disabled */
#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection      */

#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */

#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE	0x20000 /* size of one complete sector        */
#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */

/* Address and size of Redundant Environment Sector	*/
#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
#endif

#ifdef CFG_ENV_IS_IN_EEPROM
#define CFG_ENV_OFFSET		0	/* environment starts at */
					/* the beginning of the EEPROM */
#define CFG_ENV_SIZE		0x1000 /* 4096 bytes may be used for env vars */
#endif

/*
 * DDR SDRAM
 */
#define CFG_MBYTES_SDRAM        (1024)	/* 512 MiB      TODO: remove    */
#define CONFIG_DDR_DATA_EYE		/* use DDR2 optimization        */
#define CFG_MEM_TOP_HIDE        (4 << 10) /* don't use last 4kbytes     */
					/* 440EPx errata CHIP 11        */
#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup     */
#define CONFIG_DDR_ECC			/* Use ECC when available       */
#define SPD_EEPROM_ADDRESS	{0x50}
#define CONFIG_PROG_SDRAM_TLB

/*
 * I2C
 */
#define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged	        */
#define CFG_I2C_SPEED		100000	/* I2C speed and slave address  */
#define CFG_I2C_SLAVE		0x7F
#define CONFIG_I2C_CMD_TREE     1
#define CONFIG_I2C_MULTI_BUS    1

#define CFG_SPD_BUS_NUM         0
#define IIC1_MCP3021_ADDR	0x4d
#define IIC1_USB2507_ADDR	0x2c
#ifdef CONFIG_I2C_MULTI_BUS
#define CFG_I2C_NOPROBES        {{1, IIC1_USB2507_ADDR}}
#endif
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR	0x54
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 5
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01

#define CFG_EEPROM_WREN         1
#define CFG_I2C_BOOT_EEPROM_ADDR 0x52

/*
 * standard dtt sensor configuration - bottom bit will determine local or
 * remote sensor of the TMP401
 */
#define CONFIG_DTT_SENSORS		{ 0, 1 }

/*
 * The PMC440 uses a TI TMP401 temperature sensor. This part
 * is basically compatible to the ADM1021 that is supported
 * by U-Boot.
 *
 * - i2c addr 0x4c
 * - conversion rate 0x02 = 0.25 conversions/second
 * - ALERT ouput disabled
 * - local temp sensor enabled, min set to 0 deg, max set to 70 deg
 * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
 */
#define CONFIG_DTT_ADM1021
#define CFG_DTT_ADM1021		{ { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }

/*
 * RTC stuff
 */
#define CONFIG_RTC_DS1338
#define CFG_I2C_RTC_ADDR	0x68

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"ethrotate=no\0"						\
	"hostname=du440\0"						\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
	"flash_self=run ramargs addip addtty optargs;"			\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;"	\
	        "bootm\0"						\
	"rootpath=/tftpboot/du440/target_root_du440\0"			\
	"img=/tftpboot/du440/uImage\0"					\
	"kernel_addr=FFC00000\0"					\
	"ramdisk_addr=FFE00000\0"					\
	"initrd_high=30000000\0"					\
	"load=tftp 100000 /tftpboot/du440/u-boot.bin\0"			\
	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
		"cp.b 100000 FFFA0000 60000\0"				\
	""

#define CONFIG_PREBOOT                  /* enable preboot variable      */

#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds	*/

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#ifndef __ASSEMBLY__
int du440_phy_addr(int devnum);
#endif

#define	CONFIG_IBM_EMAC4_V4	1
#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		du440_phy_addr(0) /* PHY address	*/

#define CONFIG_PHY_RESET        1	/* reset phy upon startup	*/
#undef CONFIG_PHY_GIGE			/* no GbE detection		*/

#define CONFIG_HAS_ETH0
#define CFG_RX_ETH_BUFFER	128

#define CONFIG_NET_MULTI	1
#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
#define CONFIG_PHY1_ADDR	du440_phy_addr(1)

/*
 * USB
 */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_STORAGE
#define CFG_OHCI_BE_CONTROLLER

#define CFG_USB_OHCI_CPU_INIT	1
#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
#define CFG_USB_OHCI_SLOT_NAME	"du440"
#define CFG_USB_OHCI_MAX_ROOT_PORTS	15

/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE

/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION

#include <config_cmd_default.h>

#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_CMD_BSP
#define CONFIG_CMD_BMP
#define CONFIG_CMD_DATE
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DTT
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM

#define CONFIG_SUPPORT_VFAT

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory		*/
#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
#else
#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
#endif
/* Print Buffer Size */
#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS	        16	/* max number of command args	*/
#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x00400000 /* memtest works on		*/
#define CFG_MEMTEST_END		0x3f000000 /* 4 ... < 1GB DRAM	*/

#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */

#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CONFIG_LOOPW            1       /* enable loopw command         */
#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */

#define CONFIG_AUTOBOOT_KEYED	1
#define CONFIG_AUTOBOOT_PROMPT	\
	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "

/*
 * PCI stuff
 */
#define CONFIG_PCI			/* include pci support	        */
#define CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
#define CFG_PCI_TARGBASE       0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/

/* Board-specific PCI */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)     /* Initial Memory map for Linux */

/*
 * External Bus Controller (EBC) Setup
 */
#define CFG_FLASH		CFG_FLASH_BASE

#define CFG_CPLD_BASE		0xC0000000
#define CFG_CPLD_RANGE	        0x00000010
#define CFG_DUMEM_BASE		0xC0100000
#define CFG_DUMEM_RANGE		0x00100000
#define CFG_DUIO_BASE		0xC0200000
#define CFG_DUIO_RANGE	        0x00010000

#define CFG_NAND0_CS		2		/* NAND chip connected to CSx */
#define CFG_NAND1_CS		3		/* NAND chip connected to CSx */
/* Memory Bank 0 (NOR-FLASH) initialization */
#define CFG_EBC_PB0AP		0x04017200
#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)

/* Memory Bank 1 (CPLD, 16 bytes needed, but 1MB is minimum) */
#define CFG_EBC_PB1AP		0x018003c0
#define CFG_EBC_PB1CR		(CFG_CPLD_BASE | 0x18000)

/* Memory Bank 2 (NAND-FLASH) initialization */
#define CFG_EBC_PB2AP		0x018003c0
#define CFG_EBC_PB2CR		(CFG_NAND0_ADDR | 0x1c000)

/* Memory Bank 3 (NAND-FLASH) initialization */
#define CFG_EBC_PB3AP		0x018003c0
#define CFG_EBC_PB3CR		(CFG_NAND1_ADDR | 0x1c000)

/* Memory Bank 4 (DUMEM, 1MB) initialization */
#define CFG_EBC_PB4AP		0x018053c0
#define CFG_EBC_PB4CR		(CFG_DUMEM_BASE | 0x18000)

/* Memory Bank 5 (DUIO, 64KB needed, but 1MB is minimum) */
#define CFG_EBC_PB5AP		0x018053c0
#define CFG_EBC_PB5CR		(CFG_DUIO_BASE | 0x18000)

/*
 * NAND FLASH
 */
#define CFG_MAX_NAND_DEVICE	2
#define NAND_MAX_CHIPS		CFG_MAX_NAND_DEVICE
#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips */
#define CFG_NAND_BASE_LIST	{CFG_NAND0_ADDR + CFG_NAND0_CS, \
				 CFG_NAND1_ADDR + CFG_NAND1_CS}

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

#define CONFIG_AUTOSCRIPT	1

#endif	/* __CONFIG_H */
Commit	Line	Data
1a3ac86b MF	1	/*
	2	* (C) Copyright 2008
	3	* Matthias Fuchs, esd gmbh, [email protected]
	4	*
	5	* based on the Sequoia board configuration by
	6	* Stefan Roese, Jacqueline Pira-Ferriol and Alain Saurel
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	**********************************************************************
	26	* DU440.h - configuration for esd's DU440 board (Power PC440EPx)
	27	**********************************************************************
	28	*/
	29	#ifndef __CONFIG_H
	30	#define __CONFIG_H
	31
	32	/*
	33	* High Level Configuration Options
	34	*/
	35	#define CONFIG_DU440 1 /* Board is esd DU440 */
	36	#define CONFIG_440EPX 1 /* Specific PPC440EPx */
	37	#define CONFIG_4xx 1 /* ... PPC4xx family */
	38	#define CONFIG_SYS_CLK_FREQ 33333400 /* external freq to pll */
	39
	40	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
	41	#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
	42	#define CONFIG_LAST_STAGE_INIT 1 /* last_stage_init */
	43
	44	/*
	45	* Base addresses -- Note these are effective addresses where the
	46	* actual resources get mapped (not physical addresses)
	47	*/
	48	#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
	49	#define CFG_MALLOC_LEN (8 << 20) /* Reserve 8 MB for malloc() */
	50
	51	#define CFG_BOOT_BASE_ADDR 0xf0000000
	52	#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
	53	#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
	54	#define CFG_MONITOR_BASE TEXT_BASE
	55	#define CFG_NAND0_ADDR 0xd0000000 /* NAND Flash */
	56	#define CFG_NAND1_ADDR 0xd0100000 /* NAND Flash */
	57	#define CFG_OCM_BASE 0xe0010000 /* ocm */
	58	#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
	59	#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
	60	#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
	61	#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
	62	#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
	63	#define CFG_PCI_IOBASE 0xe8000000
	64
65
66	/* Don't change either of these */
67	#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
68
69	#define CFG_USB2D0_BASE 0xe0000100
70	#define CFG_USB_DEVICE 0xe0000000
71	#define CFG_USB_HOST 0xe0000400
72
73	/*
74	* Initial RAM & stack pointer
75	*/
76	/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
77	#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
78	#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
79
80	#define CFG_INIT_RAM_END (4 << 10)
81	#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
82	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
83	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
84
85	/*
86	* Serial Port
87	*/
88	/* TODO: external clock oscillator will be removed */
89	#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
90	#define CONFIG_BAUDRATE 115200
91	#define CONFIG_SERIAL_MULTI 1
92	#undef CONFIG_UART1_CONSOLE
93
94	#define CFG_BAUDRATE_TABLE \
95	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
96
97	/*
98	* Video Port
99	*/
100	#define CONFIG_VIDEO
101	#define CONFIG_VIDEO_SMI_LYNXEM
102	#define CONFIG_CFB_CONSOLE
103	#define CONFIG_VIDEO_LOGO
104	#define CONFIG_VGA_AS_SINGLE_DEVICE
105	#define CONFIG_SPLASH_SCREEN
106	#define CONFIG_SPLASH_SCREEN_ALIGN
107	#define CONFIG_VIDEO_BMP_GZIP /* gzip compressed bmp images */
108	#define CFG_VIDEO_LOGO_MAX_SIZE (4 << 20) /* for decompressed img */
109	#define CFG_DEFAULT_VIDEO_MODE 0x31a /* 1280x1024,16bpp */
110	#define CFG_CONSOLE_IS_IN_ENV
111	#define CFG_ISA_IO CFG_PCI_IOBASE
112
113	/*
114	* Environment
115	*/
116	#define CFG_ENV_IS_IN_EEPROM 1 /* use FLASH for environment vars */
117
118	/*
119	* FLASH related
120	*/
121	#define CFG_FLASH_CFI /* The flash is CFI compatible */
00b1883a	122	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
1a3ac86b MF	123
	124	#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
	125
	126	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	127	#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
	128
	129	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	130	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
	131
	132	#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
	133	/* CFI_FLASH_PROTECTION make flash_protect hang sometimes -> disabled */
	134	#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
	135
	136	#define CFG_FLASH_EMPTY_INFO
	137	#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
	138
	139	#ifdef CFG_ENV_IS_IN_FLASH
	140	#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
	141	#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
	142	#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
	143
	144	/* Address and size of Redundant Environment Sector */
	145	#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
	146	#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
	147	#endif
	148
	149	#ifdef CFG_ENV_IS_IN_EEPROM
	150	#define CFG_ENV_OFFSET 0 /* environment starts at */
	151	/* the beginning of the EEPROM */
	152	#define CFG_ENV_SIZE 0x1000 /* 4096 bytes may be used for env vars */
	153	#endif
	154
	155	/*
	156	* DDR SDRAM
	157	*/
	158	#define CFG_MBYTES_SDRAM (1024) /* 512 MiB TODO: remove */
	159	#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
7c91f51a	160	#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
02e38920	161	/* 440EPx errata CHIP 11 */
1a3ac86b	162	#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
1a3ac86b MF	163	#define CONFIG_DDR_ECC /* Use ECC when available */
	164	#define SPD_EEPROM_ADDRESS {0x50}
	165	#define CONFIG_PROG_SDRAM_TLB
	166
	167	/*
	168	* I2C
	169	*/
	170	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	171	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	172	#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
	173	#define CFG_I2C_SLAVE 0x7F
	174	#define CONFIG_I2C_CMD_TREE 1
	175	#define CONFIG_I2C_MULTI_BUS 1
	176
	177	#define CFG_SPD_BUS_NUM 0
	178	#define IIC1_MCP3021_ADDR 0x4d
	179	#define IIC1_USB2507_ADDR 0x2c
	180	#ifdef CONFIG_I2C_MULTI_BUS
	181	#define CFG_I2C_NOPROBES {{1, IIC1_USB2507_ADDR}}
	182	#endif
	183	#define CFG_I2C_MULTI_EEPROMS
	184	#define CFG_I2C_EEPROM_ADDR 0x54
	185	#define CFG_I2C_EEPROM_ADDR_LEN 2
	186	#define CFG_EEPROM_PAGE_WRITE_ENABLE
	187	#define CFG_EEPROM_PAGE_WRITE_BITS 5
	188	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
	189	#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
	190
	191	#define CFG_EEPROM_WREN 1
	192	#define CFG_I2C_BOOT_EEPROM_ADDR 0x52
	193
	194	/*
	195	* standard dtt sensor configuration - bottom bit will determine local or
	196	* remote sensor of the TMP401
	197	*/
	198	#define CONFIG_DTT_SENSORS { 0, 1 }
	199
	200	/*
	201	* The PMC440 uses a TI TMP401 temperature sensor. This part
	202	* is basically compatible to the ADM1021 that is supported
	203	* by U-Boot.
	204	*
	205	* - i2c addr 0x4c
	206	* - conversion rate 0x02 = 0.25 conversions/second
	207	* - ALERT ouput disabled
	208	* - local temp sensor enabled, min set to 0 deg, max set to 70 deg
	209	* - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
	210	*/
	211	#define CONFIG_DTT_ADM1021
	212	#define CFG_DTT_ADM1021 { { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
	213
	214	/*
	215	* RTC stuff
	216	*/
	217	#define CONFIG_RTC_DS1338
	218	#define CFG_I2C_RTC_ADDR 0x68
	219
	220	#undef CONFIG_BOOTARGS
	221
	222	#define CONFIG_EXTRA_ENV_SETTINGS \
	223	"netdev=eth0\0" \
	224	"ethrotate=no\0" \
	225	"hostname=du440\0" \
	226	"nfsargs=setenv bootargs root=/dev/nfs rw " \
227	"nfsroot=${serverip}:${rootpath}\0" \
228	"ramargs=setenv bootargs root=/dev/ram rw\0" \
229	"addip=setenv bootargs ${bootargs} " \
230	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
231	":${hostname}:${netdev}:off panic=1\0" \
232	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
233	"flash_self=run ramargs addip addtty optargs;" \
234	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
235	"net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;" \
236	"bootm\0" \
237	"rootpath=/tftpboot/du440/target_root_du440\0" \
238	"img=/tftpboot/du440/uImage\0" \
239	"kernel_addr=FFC00000\0" \
240	"ramdisk_addr=FFE00000\0" \
241	"initrd_high=30000000\0" \
242	"load=tftp 100000 /tftpboot/du440/u-boot.bin\0" \
243	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
244	"cp.b 100000 FFFA0000 60000\0" \
245	""
1a3ac86b MF	246
	247	#define CONFIG_PREBOOT /* enable preboot variable */
	248
	249	#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
	250
	251	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	252	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	253
	254	#ifndef __ASSEMBLY__
	255	int du440_phy_addr(int devnum);
	256	#endif
	257
	258	#define CONFIG_IBM_EMAC4_V4 1
	259	#define CONFIG_MII 1 /* MII PHY management */
	260	#define CONFIG_PHY_ADDR du440_phy_addr(0) /* PHY address */
	261
	262	#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
7c91f51a	263	#undef CONFIG_PHY_GIGE /* no GbE detection */
1a3ac86b MF	264
	265	#define CONFIG_HAS_ETH0
	266	#define CFG_RX_ETH_BUFFER 128
	267
	268	#define CONFIG_NET_MULTI 1
	269	#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
	270	#define CONFIG_PHY1_ADDR du440_phy_addr(1)
	271
	272	/*
	273	* USB
	274	*/
	275	#define CONFIG_USB_OHCI_NEW
	276	#define CONFIG_USB_STORAGE
	277	#define CFG_OHCI_BE_CONTROLLER
	278
	279	#define CFG_USB_OHCI_CPU_INIT 1
	280	#define CFG_USB_OHCI_REGS_BASE CFG_USB_HOST
	281	#define CFG_USB_OHCI_SLOT_NAME "du440"
	282	#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
	283
	284	/* Comment this out to enable USB 1.1 device */
	285	#define USB_2_0_DEVICE
	286
	287	/* Partitions */
	288	#define CONFIG_MAC_PARTITION
	289	#define CONFIG_DOS_PARTITION
	290	#define CONFIG_ISO_PARTITION
	291
	292	#include <config_cmd_default.h>
	293
7c91f51a	294	#define CONFIG_CMD_AUTOSCRIPT
1a3ac86b	295	#define CONFIG_CMD_BSP
7c91f51a	296	#define CONFIG_CMD_BMP
1a3ac86b MF	297	#define CONFIG_CMD_DATE
	298	#define CONFIG_CMD_ASKENV
	299	#define CONFIG_CMD_DHCP
	300	#define CONFIG_CMD_DTT
	301	#define CONFIG_CMD_DIAG
	302	#define CONFIG_CMD_EEPROM
	303	#define CONFIG_CMD_ELF
	304	#define CONFIG_CMD_FAT
	305	#define CONFIG_CMD_I2C
	306	#define CONFIG_CMD_IRQ
	307	#define CONFIG_CMD_MII
	308	#define CONFIG_CMD_NAND
	309	#define CONFIG_CMD_NET
	310	#define CONFIG_CMD_NFS
	311	#define CONFIG_CMD_PCI
	312	#define CONFIG_CMD_PING
	313	#define CONFIG_CMD_USB
	314	#define CONFIG_CMD_REGINFO
	315	#define CONFIG_CMD_SDRAM
	316
	317	#define CONFIG_SUPPORT_VFAT
	318
	319	/*
	320	* Miscellaneous configurable options
	321	*/
	322	#define CFG_LONGHELP /* undef to save memory */
	323	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	324	#if defined(CONFIG_CMD_KGDB)
	325	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	326	#else
	327	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	328	#endif
	329	/* Print Buffer Size */
	330	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
	331	#define CFG_MAXARGS 16 /* max number of command args */
	332	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	333
	334	#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
	335	#define CFG_MEMTEST_END 0x3f000000 /* 4 ... < 1GB DRAM */
	336
	337	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	338	#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
	339
	340	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	341
	342	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
	343	#define CONFIG_LOOPW 1 /* enable loopw command */
	344	#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
	345	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	346	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
	347
c37207d7 WD	348	#define CONFIG_AUTOBOOT_KEYED 1
	349	#define CONFIG_AUTOBOOT_PROMPT \
	350	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
1a3ac86b MF	351	#define CONFIG_AUTOBOOT_DELAY_STR "d"
	352	#define CONFIG_AUTOBOOT_STOP_STR " "
	353
	354	/*
	355	* PCI stuff
	356	*/
	357	#define CONFIG_PCI /* include pci support */
	358	#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
	359	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	360	#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
	361
	362	/* Board-specific PCI */
	363	#define CFG_PCI_TARGET_INIT
	364	#define CFG_PCI_MASTER_INIT
	365
	366	/*
	367	* For booting Linux, the board info and command line data
	368	* have to be in the first 8 MB of memory, since this is
	369	* the maximum mapped by the Linux kernel during initialization.
	370	*/
	371	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	372
	373	/*
	374	* External Bus Controller (EBC) Setup
	375	*/
	376	#define CFG_FLASH CFG_FLASH_BASE
	377
	378	#define CFG_CPLD_BASE 0xC0000000
53677ef1	379	#define CFG_CPLD_RANGE 0x00000010
1a3ac86b	380	#define CFG_DUMEM_BASE 0xC0100000
53677ef1	381	#define CFG_DUMEM_RANGE 0x00100000
1a3ac86b	382	#define CFG_DUIO_BASE 0xC0200000
53677ef1	383	#define CFG_DUIO_RANGE 0x00010000
1a3ac86b MF	384
	385	#define CFG_NAND0_CS 2 /* NAND chip connected to CSx */
	386	#define CFG_NAND1_CS 3 /* NAND chip connected to CSx */
	387	/* Memory Bank 0 (NOR-FLASH) initialization */
	388	#define CFG_EBC_PB0AP 0x04017200
	389	#define CFG_EBC_PB0CR (CFG_FLASH_BASE \| 0xda000)
	390
	391	/* Memory Bank 1 (CPLD, 16 bytes needed, but 1MB is minimum) */
	392	#define CFG_EBC_PB1AP 0x018003c0
	393	#define CFG_EBC_PB1CR (CFG_CPLD_BASE \| 0x18000)
	394
	395	/* Memory Bank 2 (NAND-FLASH) initialization */
	396	#define CFG_EBC_PB2AP 0x018003c0
	397	#define CFG_EBC_PB2CR (CFG_NAND0_ADDR \| 0x1c000)
	398
	399	/* Memory Bank 3 (NAND-FLASH) initialization */
	400	#define CFG_EBC_PB3AP 0x018003c0
	401	#define CFG_EBC_PB3CR (CFG_NAND1_ADDR \| 0x1c000)
	402
	403	/* Memory Bank 4 (DUMEM, 1MB) initialization */
	404	#define CFG_EBC_PB4AP 0x018053c0
	405	#define CFG_EBC_PB4CR (CFG_DUMEM_BASE \| 0x18000)
	406
	407	/* Memory Bank 5 (DUIO, 64KB needed, but 1MB is minimum) */
	408	#define CFG_EBC_PB5AP 0x018053c0
	409	#define CFG_EBC_PB5CR (CFG_DUIO_BASE \| 0x18000)
	410
	411	/*
	412	* NAND FLASH
	413	*/
	414	#define CFG_MAX_NAND_DEVICE 2
	415	#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE
	416	#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
	417	#define CFG_NAND_BASE_LIST {CFG_NAND0_ADDR + CFG_NAND0_CS, \
	418	CFG_NAND1_ADDR + CFG_NAND1_CS}
	419
	420	/*
	421	* Internal Definitions
	422	*
	423	* Boot Flags
	424	*/
	425	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	426	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	427
	428	#if defined(CONFIG_CMD_KGDB)
	429	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	430	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	431	#endif
	432
7c91f51a	433	#define CONFIG_AUTOSCRIPT 1
1a3ac86b MF	434
1a3ac86b MF	435	#endif /* __CONFIG_H */