drivers/usb/serial/omninet.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * USB ZyXEL omni.net driver
   4  *
   5  * Copyright (C) 2013,2017 Johan Hovold <[email protected]>
   6  *
   7  * See Documentation/usb/usb-serial.rst for more information on using this
   8  * driver
   9  *
  10  * Please report both successes and troubles to the author at [email protected]
  11  */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/errno.h>
  15 #include <linux/slab.h>
  16 #include <linux/tty.h>
  17 #include <linux/tty_driver.h>
  18 #include <linux/tty_flip.h>
  19 #include <linux/module.h>
  20 #include <linux/uaccess.h>
  21 #include <linux/usb.h>
  22 #include <linux/usb/serial.h>
  23
  24 #define DRIVER_AUTHOR "Alessandro Zummo"
  25 #define DRIVER_DESC "USB ZyXEL omni.net Driver"
  26
  27 #define ZYXEL_VENDOR_ID         0x0586
  28 #define ZYXEL_OMNINET_ID        0x1000
  29 #define ZYXEL_OMNI_56K_PLUS_ID  0x1500
  30 /* This one seems to be a re-branded ZyXEL device */
  31 #define BT_IGNITIONPRO_ID       0x2000
  32
  33 /* function prototypes */
  34 static void omninet_process_read_urb(struct urb *urb);
  35 static int omninet_prepare_write_buffer(struct usb_serial_port *port,
  36                                 void *buf, size_t count);
  37 static int omninet_calc_num_ports(struct usb_serial *serial,
  38                                 struct usb_serial_endpoints *epds);
  39 static int omninet_port_probe(struct usb_serial_port *port);
  40 static void omninet_port_remove(struct usb_serial_port *port);
  41
  42 static const struct usb_device_id id_table[] = {
  43         { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
  44         { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
  45         { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
  46         { }                                             /* Terminating entry */
  47 };
  48 MODULE_DEVICE_TABLE(usb, id_table);
  49
  50 static struct usb_serial_driver zyxel_omninet_device = {
  51         .driver = {
  52                 .name =         "omninet",
  53         },
  54         .description =          "ZyXEL - omni.net usb",
  55         .id_table =             id_table,
  56         .num_bulk_out =         2,
  57         .calc_num_ports =       omninet_calc_num_ports,
  58         .port_probe =           omninet_port_probe,
  59         .port_remove =          omninet_port_remove,
  60         .process_read_urb =     omninet_process_read_urb,
  61         .prepare_write_buffer = omninet_prepare_write_buffer,
  62 };
  63
  64 static struct usb_serial_driver * const serial_drivers[] = {
  65         &zyxel_omninet_device, NULL
  66 };
  67
  68
  69 /*
  70  * The protocol.
  71  *
  72  * The omni.net always exchange 64 bytes of data with the host. The first
  73  * four bytes are the control header.
  74  *
  75  * oh_seq is a sequence number. Don't know if/how it's used.
  76  * oh_len is the length of the data bytes in the packet.
  77  * oh_xxx Bit-mapped, related to handshaking and status info.
  78  *      I normally set it to 0x03 in transmitted frames.
  79  *      7: Active when the TA is in a CONNECTed state.
  80  *      6: unknown
  81  *      5: handshaking, unknown
  82  *      4: handshaking, unknown
  83  *      3: unknown, usually 0
  84  *      2: unknown, usually 0
  85  *      1: handshaking, unknown, usually set to 1 in transmitted frames
  86  *      0: handshaking, unknown, usually set to 1 in transmitted frames
  87  * oh_pad Probably a pad byte.
  88  *
  89  * After the header you will find data bytes if oh_len was greater than zero.
  90  */
  91 struct omninet_header {
  92         __u8    oh_seq;
  93         __u8    oh_len;
  94         __u8    oh_xxx;
  95         __u8    oh_pad;
  96 };
  97
  98 struct omninet_data {
  99         __u8    od_outseq;      /* Sequence number for bulk_out URBs */
 100 };
 101
 102 static int omninet_calc_num_ports(struct usb_serial *serial,
 103                                         struct usb_serial_endpoints *epds)
 104 {
 105         /* We need only the second bulk-out for our single-port device. */
 106         epds->bulk_out[0] = epds->bulk_out[1];
 107         epds->num_bulk_out = 1;
 108
 109         return 1;
 110 }
 111
 112 static int omninet_port_probe(struct usb_serial_port *port)
 113 {
 114         struct omninet_data *od;
 115
 116         od = kzalloc(sizeof(*od), GFP_KERNEL);
 117         if (!od)
 118                 return -ENOMEM;
 119
 120         usb_set_serial_port_data(port, od);
 121
 122         return 0;
 123 }
 124
 125 static void omninet_port_remove(struct usb_serial_port *port)
 126 {
 127         struct omninet_data *od;
 128
 129         od = usb_get_serial_port_data(port);
 130         kfree(od);
 131 }
 132
 133 #define OMNINET_HEADERLEN       4
 134 #define OMNINET_BULKOUTSIZE     64
 135 #define OMNINET_PAYLOADSIZE     (OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN)
 136
 137 static void omninet_process_read_urb(struct urb *urb)
 138 {
 139         struct usb_serial_port *port = urb->context;
 140         const struct omninet_header *hdr = urb->transfer_buffer;
 141         const unsigned char *data;
 142         size_t data_len;
 143
 144         if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len)
 145                 return;
 146
 147         data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN;
 148         data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN,
 149                                                                 hdr->oh_len);
 150         tty_insert_flip_string(&port->port, data, data_len);
 151         tty_flip_buffer_push(&port->port);
 152 }
 153
 154 static int omninet_prepare_write_buffer(struct usb_serial_port *port,
 155                                         void *buf, size_t count)
 156 {
 157         struct omninet_data *od = usb_get_serial_port_data(port);
 158         struct omninet_header *header = buf;
 159
 160         count = min_t(size_t, count, OMNINET_PAYLOADSIZE);
 161
 162         count = kfifo_out_locked(&port->write_fifo, buf + OMNINET_HEADERLEN,
 163                         count, &port->lock);
 164
 165         header->oh_seq = od->od_outseq++;
 166         header->oh_len = count;
 167         header->oh_xxx = 0x03;
 168         header->oh_pad = 0x00;
 169
 170         /* always 64 bytes */
 171         return OMNINET_BULKOUTSIZE;
 172 }
 173
 174 module_usb_serial_driver(serial_drivers, id_table);
 175
 176 MODULE_AUTHOR(DRIVER_AUTHOR);
 177 MODULE_DESCRIPTION(DRIVER_DESC);
 178 MODULE_LICENSE("GPL v2");