]> Git Repo - J-linux.git/blob - drivers/staging/octeon/ethernet-mdio.c
Merge tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
[J-linux.git] / drivers / staging / octeon / ethernet-mdio.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * This file is based on code from OCTEON SDK by Cavium Networks.
4  *
5  * Copyright (c) 2003-2007 Cavium Networks
6  */
7
8 #include <linux/kernel.h>
9 #include <linux/ethtool.h>
10 #include <linux/phy.h>
11 #include <linux/ratelimit.h>
12 #include <linux/of_mdio.h>
13 #include <net/dst.h>
14
15 #include "octeon-ethernet.h"
16 #include "ethernet-defines.h"
17 #include "ethernet-mdio.h"
18 #include "ethernet-util.h"
19
20 static void cvm_oct_get_drvinfo(struct net_device *dev,
21                                 struct ethtool_drvinfo *info)
22 {
23         strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
24         strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
25 }
26
27 static int cvm_oct_nway_reset(struct net_device *dev)
28 {
29         if (!capable(CAP_NET_ADMIN))
30                 return -EPERM;
31
32         if (dev->phydev)
33                 return phy_start_aneg(dev->phydev);
34
35         return -EINVAL;
36 }
37
38 const struct ethtool_ops cvm_oct_ethtool_ops = {
39         .get_drvinfo = cvm_oct_get_drvinfo,
40         .nway_reset = cvm_oct_nway_reset,
41         .get_link = ethtool_op_get_link,
42         .get_link_ksettings = phy_ethtool_get_link_ksettings,
43         .set_link_ksettings = phy_ethtool_set_link_ksettings,
44 };
45
46 /**
47  * cvm_oct_ioctl - IOCTL support for PHY control
48  * @dev:    Device to change
49  * @rq:     the request
50  * @cmd:    the command
51  *
52  * Returns Zero on success
53  */
54 int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
55 {
56         if (!netif_running(dev))
57                 return -EINVAL;
58
59         if (!dev->phydev)
60                 return -EINVAL;
61
62         return phy_mii_ioctl(dev->phydev, rq, cmd);
63 }
64
65 void cvm_oct_note_carrier(struct octeon_ethernet *priv,
66                           union cvmx_helper_link_info li)
67 {
68         if (li.s.link_up) {
69                 pr_notice_ratelimited("%s: %u Mbps %s duplex, port %d, queue %d\n",
70                                       netdev_name(priv->netdev), li.s.speed,
71                                       (li.s.full_duplex) ? "Full" : "Half",
72                                       priv->port, priv->queue);
73         } else {
74                 pr_notice_ratelimited("%s: Link down\n",
75                                       netdev_name(priv->netdev));
76         }
77 }
78
79 void cvm_oct_adjust_link(struct net_device *dev)
80 {
81         struct octeon_ethernet *priv = netdev_priv(dev);
82         union cvmx_helper_link_info link_info;
83
84         link_info.u64           = 0;
85         link_info.s.link_up     = dev->phydev->link ? 1 : 0;
86         link_info.s.full_duplex = dev->phydev->duplex ? 1 : 0;
87         link_info.s.speed       = dev->phydev->speed;
88         priv->link_info         = link_info.u64;
89
90         /*
91          * The polling task need to know about link status changes.
92          */
93         if (priv->poll)
94                 priv->poll(dev);
95
96         if (priv->last_link != dev->phydev->link) {
97                 priv->last_link = dev->phydev->link;
98                 cvmx_helper_link_set(priv->port, link_info);
99                 cvm_oct_note_carrier(priv, link_info);
100         }
101 }
102
103 int cvm_oct_common_stop(struct net_device *dev)
104 {
105         struct octeon_ethernet *priv = netdev_priv(dev);
106         int interface = INTERFACE(priv->port);
107         union cvmx_helper_link_info link_info;
108         union cvmx_gmxx_prtx_cfg gmx_cfg;
109         int index = INDEX(priv->port);
110
111         gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
112         gmx_cfg.s.en = 0;
113         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
114
115         priv->poll = NULL;
116
117         if (dev->phydev)
118                 phy_disconnect(dev->phydev);
119
120         if (priv->last_link) {
121                 link_info.u64 = 0;
122                 priv->last_link = 0;
123
124                 cvmx_helper_link_set(priv->port, link_info);
125                 cvm_oct_note_carrier(priv, link_info);
126         }
127         return 0;
128 }
129
130 /**
131  * cvm_oct_phy_setup_device - setup the PHY
132  *
133  * @dev:    Device to setup
134  *
135  * Returns Zero on success, negative on failure
136  */
137 int cvm_oct_phy_setup_device(struct net_device *dev)
138 {
139         struct octeon_ethernet *priv = netdev_priv(dev);
140         struct device_node *phy_node;
141         struct phy_device *phydev = NULL;
142
143         if (!priv->of_node)
144                 goto no_phy;
145
146         phy_node = of_parse_phandle(priv->of_node, "phy-handle", 0);
147         if (!phy_node && of_phy_is_fixed_link(priv->of_node))
148                 phy_node = of_node_get(priv->of_node);
149         if (!phy_node)
150                 goto no_phy;
151
152         phydev = of_phy_connect(dev, phy_node, cvm_oct_adjust_link, 0,
153                                 priv->phy_mode);
154         of_node_put(phy_node);
155
156         if (!phydev)
157                 return -EPROBE_DEFER;
158
159         priv->last_link = 0;
160         phy_start(phydev);
161
162         return 0;
163 no_phy:
164         /* If there is no phy, assume a direct MAC connection and that
165          * the link is up.
166          */
167         netif_carrier_on(dev);
168         return 0;
169 }
This page took 0.035739 seconds and 4 git commands to generate.